z/VM: CP Commands and Utilities Reference - z/VM - IBM

LOCATE DGNBK
Responses
Messages
9. Many external security managers (ESMs) do not support DIAGNOSE codes
above X'03FC'. For this reason, CP does not support DIAGNOSE codes above
X'03FC'. The DIAGNOSE codes between X'0000' and X'03FC' are divided as
follows:
X'0000' to X'00FC'
Reserved for IBM use
X'0100' to X'01FC'
Reserved for customer use
X'0200' to X'03FC'
Reserved for IBM use.
10. For more information about user-defined DIAGNOSE codes, see the z/VM: CP
Exit Customization book.
Response 1:
To display the address of the DIAGNOSE code table entry for DIAGNOSE code
X'0C', enter the following:
locate dgnbk c
Code DGNBK
000C 005F09C8
Ready;
HCP003E Invalid option - command contains
extra option(s) starting with option
HCP009E Invalid range - range
HCP026E Operand missing or invalid
HCP2751E The variations of this message are as
follows:
v Diagnose code diag does not exist
v Diagnose codes diag1-diag2 do not
exist
HCP6706E Invalid Diagnose code - diag
534 z/VM: CP Commands and Utilities Reference