z/VM: CP Commands and Utilities Reference - z/VM - IBM

IPL
Messages
is issued after the IPL is complete when the STOP option is specified.
xxxxxxxx
is the address where execution of the loaded program starts.
After this response is issued, your virtual console is placed into CP READ so that
you may enter CP commands (for example, TRACE). After entering all desired CP
commands, issue the BEGIN command to start executing the loaded program.
Note: A guest IPL from SCSI disk may cause non-CP messages to be displayed
that are not included here. For descriptions of these messages, see zSeries
Small Computer Systems Interface (SCSI) IPL – Machine Loader Messages,
SC28-6839-00.
HCP003E Invalid option - {option|command
contains extra option(s) starting with
option}
HCP006E Invalid device type - {rdev|vdev|ldev}
HCP013E Conflicting option - option
HCP022E A virtual device number was not
supplied or it was invalid.
HCP040E Device {rdev|vdev|ldev} does not exist
HCP044E System {name|volume} does not exist
HCP052E [XAUTOLOG failed for userid:] Error in
CP directory
HCP053E [XAUTOLOG failed for userid:]
userid|value not in CP directory
HCP059E {XAUTOLOG|AUTOLOG} failed for
userid - {IPL missing|IPL
failed|accounting errors|incorrect
password}
HCP170E System name exceeds storage size;
{nnnnnnnnK|nnnnM} required
HCP174E Paging I/O error; IPL failed
HCP177E Your PARM data exceeds the limit of
nn characters. Correct your data string
and reissue the IPL command.
HCP232E IPL UNIT ERROR, {CSW=csw|IRB=irb},
SNS=sense
508 z/VM: CP Commands and Utilities Reference
HCP260E IPL command processing cannot
complete due to errors.
HCP356E Access denied; User userid file spoolid
not {changed|transferred|printed}
HCP410E CP ENTERED; PAGING ERROR
HCP447E System sysname cannot be IPLed due
to an invalid processor configuration.
HCP449E Your userid is not authorized to IPL
system name.
HCP475I Fatal I/O error trying to read directory
from volid [for user userid]
HCP799E IPL failed due to insufficient or faulty
storage
HCP819I Traceid traceid disabled; group group
enabled by traceid
HCP838E The request process cannot complete
due to a processor controller failure.
HCP1001E An operand is missing for option.
HCP1013E An invalid operand was supplied for
option - operand
HCP1015E [XAUTOLOG failed for userid:]
Insufficient storage is available to
satisfy your request.
HCP1122E command was not performed. Tape
vdev has been given to user userid.