z/VM: CP Commands and Utilities Reference - z/VM - IBM

Note: The response line containing Vvectime and Tvectime appears only for those
virtual machines with a Vector Facility defined.
Userid=userid Mach={ESA} V=V Attached xstore={nnnnnnnnM}
{XA } {NONE }
{XC }
Iplsys={DEV vdev} Devnum=nnnnn
{DEV NONE}
{sysname }
Spool: Reads=nnnnnnnnnn Writes=nnnnnnnnnn
Owned spaces: Number=nnnnn Owned size=nu
Primary space: ID=spaceid {PRIVATE}
{SHARED }
Defined size=nu Address limit=nu
Private spaces: Number=nnnnn Owned size=nu
Pages: Main=n...n Xstore=nnnnnnnnnn Dasd=nnnnnnnnnn
Locked=n...n WS=n...n Reserved=n...n
Shared spaces: Number=nnnnn Owned size=nu
Pages: Main=n...n Xstore=nnnnnnnnnn Dasd=nnnnnnnnnn
Locked=n...n
Private paging:
Xstore: Reads=nnnnnnnnnn Writes=nnnnnnnnnn Migrates=nnnnnnnnnn
Dasd: Reads=nnnnnnnnnn Writes=nnnnnnnnnn
Shared paging:
Xstore: Reads=nnnnnnnnnn Writes=nnnnnnnnnn Migrates=nnnnnnnnnn
Dasd: Reads=nnnnnnnnnn Writes=nnnnnnnnnn
CPU nn: Ctime=ddd hh:mm:ss Vtime=ddd hh:mm:ss Ttime=ddd hh:mm:ss
[Vvectime=ddd hh:mm:ss Tvectime=ddd hh:mm:ss]
Rdr=nnnnnnnnnn Prt=nnnnnnnnnn Pch=nnnnnnnnnn IO=nnnnnnnnnn
Userid=userid
identifies the virtual machine.
Mach=ESA
Mach=XA
Mach=XC
indicates the virtual machine operating mode.
V=V
indicates that the virtual machine is operating in the V=V area.
Attached xstore=nnnnnnnnM
Attached xstore=NONE
If expanded storage is attached to this virtual machine, nnnnnnnnM is its size in
megabytes. NONE indicates that expanded storage is not attached to this
virtual machine.
Iplsys=DEV vdev
Iplsys=DEV NONE
Iplsys=sysname
The operand vdev is the device number of the last IPLed device. If no device
was IPLed, NONE is displayed.
The operand sysname is the name of the last named saved system to be
IPLed. It was previously saved through the SAVESYS command.
Devnum=nnnnn
indicates the number of devices attached to this user.
INDICATE USER
Spool
includes information about utilization of DASD spooling space by this user.
Chapter 2. CP Commands 493