z/VM: CP Commands and Utilities Reference - z/VM - IBM

INDICATE USER
Table 10. Storage Units of Measure
Unit of measure
(u)
490 z/VM: CP Commands and Utilities Reference
Maximum allowed
(n)
K - Kilobytes 2096128
M - Megabytes 17592186044416
G - Gigabytes 17179869184
T - Terabytes 16777216
P - Petabytes 16384
E - Exabytes 16
VIRT=V
indicates that the virtual machine is operating in the V=V area.
XSTORE=nnnnnnnnM
XSTORE=NONE
If expanded storage is attached to this virtual machine, nnnnnnnnM is its size in
megabytes. NONE indicates that expanded storage is not attached to this
virtual machine.
IPLSYS=DEV vdev
IPLSYS=DEV NONE
IPLSYS=sysname
The operand vdev is the device number of the last IPLed device for the virtual
configuration.
The operand sysname is the name of the last named saved system to be
IPLed. It was previously saved through the SAVESYS command. If no device or
named saved system was IPLed, DEV NONE is displayed.
DEVNUM=nnnnn
indicates the number of devices attached to this user.
PAGES
includes information about pages for this user.
RES=n...n
is the number of the user’s virtual storage pages resident in real storage at
the time the command is issued.
WS=n...n
is the most recent system estimate of the user’s working set size.
LOCK=n...n
is the current number of the user’s virtual storage pages that are locked.
RESVD=n...n
is the current number of the user’s virtual storage pages that are reserved.
NPREF=n...n
when a userid is specified, this is the number of private address space pages
owned by this user, currently residing on paging space. When the SYSTEM
operand is used, this is the number of shared address space pages owned by
the system, currently residing on paging space.
PREF=000000
appears for compatibility purposes.
READS=n...n
is the total number of page reads for this user since logon.