z/VM: CP Commands and Utilities Reference - z/VM - IBM

Responses
Examples
The Hyperswap command receives the following responses:
755001R
used with the QUIESCE command; indicates quiesce processing
completed.
755101R
used with the SWAP command; indicates swap processing completed.
755201R
used with the RESUME command; indicates resume processing completed.
755301R
used with the ENABLE command; indicates enable processing completed.
755401R
used with the DISABLE command; indicates disable processing completed.
Example 1:
To QUIesce real device 500 enter the following:
HYP QUI 500
Example 2:
To QUIesce the device with a volume serial id of MNT500 enter the following;
HYP QUI VOL MNT500
Example 3:
To QUIesce real devices 500 and 502 through 504 enter the following:
HYP QUI 500 502.3
Example 4:
To SWAp real device 500 with real device 505 enter the following:
HYP SWA 500 505
Example 5:
To SWAp real device 500 with real device 505 and 501 with 506 enter the following:
HYP SWA 500.2 505
Example 6:
To SWAp the device with a volume serial ID of MNT500 with a device that has
volume serial ID MNT505 enter the following:
HYP SWA VOL MNT500 MNT505
Example 7:
To RESume real devices 500 through 503 enter the following:
HYP RESU 500.4
HYPERSWAP
Chapter 2. CP Commands 465