z/VM: CP Commands and Utilities Reference - z/VM - IBM

DRAIN UR
IMAGE imagelib
specifies the name of the system image library file that contains the load
images (character sets), FCBs, graphic character modifications, or copy
modifications that are to be used for printing files and separators. imagelib may
be from one to eight characters long, and must be an existing image library file.
FCB name
is the name of the forms control buffer (FCB) module to be used by the printer
in the vertical formatting of a page.
Note: This does not appear for 1403-type printers.
CHARS name
specifies the name of the default character set used when spool files are being
printed that do not specify a character set.
HOLD
prevents the printing of a file by placing it in a user hold status.
PURGE
closes and purges the spool file on the specified 3800 printer, regardless of the
cont, keep, and hold setting for the device.
LPP nnn
indicates the lines per page that the printer is using for the generation of
separator pages. The LPP value is determined from the FCB loaded on the
printer.
If no FCB has been loaded to the printer, the LPP will appear as zero. Since
the FCB is actually loaded when a file is printed, it is possible that the LPP will
appear as zero or the LPP value for the prior FCB after the START command
with the FCB operand is issued.
Note: If the number of lines per page derived from the FCB data is less than
30 or greater than 255, the LPP for that printer will be set to a default
value of 66 for impact printers, or 60 for 3800 printers.
NOFOLD
FOLD
indicates whether lowercase characters are being translated (folded) into
uppercase for printing.
CHARS chars
indicates the character set being used by the printer.
INDEX nn
indicates the character position on the page at which to begin printing.
PRT
PUN
indicates the type of device on which the file is being processed.
rdev
is the real device number.
DEST dest
is the destination value. dest is a one- to eight-character value. OFF is the
default destination for the device for the first of four destination values. The
designation - NONE - is shown for other destination values that have not been
set.
AFP
348 z/VM: CP Commands and Utilities Reference