z/VM: CP Commands and Utilities Reference - z/VM - IBM

DISPLAY Host Storage
Response 4:
Hhexloc mnemonic x-x mnemonic x-x mnemonic x-x [key]
is the response you receive with the I option. The operand Hhexloc is the
hexadecimal storage location of the first instruction to be displayed. The operand
mnemonic is a character representation of the instruction code. This mnemonic can
be as many as five characters in length. x-x is the actual hexadecimal contents of
storage and is either two, four, or six bytes as determined by the instruction length
code. Unrecognizable instruction codes are indicated by a series of asterisks. A
minimum of one instruction and a maximum of three instructions are displayed on
each line. The storage key is displayed on the first line and at every page boundary.
Response 5:
Hhexloc stringhexadecimaldata [key]
is the response you receive with the S option. The storage key is displayed on the
first line of a range, and at every page boundary.
Response 6:
Hhexloc1 TO hexloc2 KEY = kk
is the response you receive with the K option. The operands hexloc1 and hexloc2
are storage locations, and kk is the associated storage key for Hhexloc1. You
receive this response for every contiguous address range that has unique storage
keys, and whenever a segment boundary is crossed.
Response 7:
If your display request includes a request to display one or more lines identical with
the previous line, you receive the following response:
Hhexloc1 TO hexloc2 SUPPRESSED LINE(S)
SAME AS ABOVE ...
316 z/VM: CP Commands and Utilities Reference
The operands hexloc1 and hexloc2 are storage locations.