z/VM: CP Commands and Utilities Reference - z/VM - IBM

minimum of one instruction and a maximum of three instructions are displayed on
each line. The storage key is displayed on the first line of a request and at every
page boundary.
Response 5:
Xhexloc stringhexadecimaldata [key][Lhexloc]
is the response you receive with the S option. The storage key is displayed on the
first line of a request and at every page boundary.
Response 6:
Xhexloc1 TO hexloc2 KEY = kk
is the response you receive with the K option. The operands hexloc1 and hexloc2
are storage locations, and kk is the associated storage key. A response is sent for
every contiguous address range that has unique storage keys and whenever a
segment boundary is crossed.
Response 7:
The PSW is used to resolve a logical address. A PSW that is not valid causes the
current request to be rejected and processing to continue with the next request (if
any) on the command line. In all cases, a reset PSW (all-zero) is accepted. The
rejected operands are displayed along with a response indicating that the PSW is
not valid. The response is:
addr1 is not addressable because of an nonvalid PSW.
The operand addr1 is the rejected operand or operands; it specifies an address
space and a storage location within that address space.
Response 8:
The dynamic-address translation (DAT) process uses the segment table designator
(ASCE) to convert a third-level address to a second-level address (storage that
appears real to your virtual machine). The translation process may generate one of
several exceptions, identifying why one or more pages of storage are not
addressable. A range of rejected storage addresses is displayed along with a
response indicating the nature of the exception condition. The responses are:
Xhexloc1 to hexloc2 nonaddressable storage
- protection exception
Xhexloc1 to hexloc2 nonaddressable storage
- addressing exception
Xhexloc1 to hexloc2 nonaddressable storage
- segment translation exception
Xhexloc1 to hexloc2 nonaddressable storage
- page translation exception
Xhexloc1 to hexloc2 nonaddressable storage
- translation specification exception
xhexloc1 to hexloc2 nonaddressable storage
- ASCE type exception
xhexloc1 to hexloc2 nonaddressable storage
- region-first-translation exception
xhexloc1 to hexloc2 nonaddressable storage
- region-second-translation exception
xhexloc1 to hexloc2 nonaddressable storage
- region-third-translation exception
DISPLAY Guest Storage (z/Architecture)
Chapter 2. CP Commands 311