z/VM: CP Commands and Utilities Reference - z/VM - IBM

is the response you receive with the K option. The operands hexloc1 and hexloc2
are storage locations, and kk is the associated storage key. A response is sent for
every contiguous address range that has unique storage keys and whenever a
segment boundary is crossed.
Response 7:
The PSW is used to resolve a logical address. A PSW that is not valid causes the
current request to be rejected and processing to continue with the next request (if
any) on the command line. In all cases, a reset PSW (all-zero) is accepted. The
rejected operands are displayed along with a response indicating that the PSW is
not valid. The response is:
addr1 is not addressable because of a nonvalid PSW.
The operand addr1 is the rejected operand or operands; it specifies an address
space and a storage location within that address space.
Response 8:
The dynamic-address translation (DAT) process uses the segment table designator
(STD) to convert a third-level address to a second-level address (storage that
appears real to your virtual machine). The translation process may generate one of
several exceptions, identifying why one or more pages of storage are not
addressable. A range of rejected storage addresses is displayed along with a
response indicating the nature of the exception condition. The responses are:
Xhexloc1 to hexloc2 nonaddressable storage
- protection exception
Xhexloc1 to hexloc2 nonaddressable storage
- addressing exception
Xhexloc1 to hexloc2 nonaddressable storage
- segment translation exception
Xhexloc1 to hexloc2 nonaddressable storage
- page translation exception
Xhexloc1 to hexloc2 nonaddressable storage
- translation specification exception
where Xhexloc1 is the starting address and hexloc2 the ending address of the
nonaddressable storage.
The addresses take into account basing, indexing, and wrapping and are padded to
eight digits.
Response 9:
If your display request includes a request to display identical lines, you receive the
following response:
Xhexloc1 TO hexloc2 SUPPRESSED LINE(S) SAME AS ABOVE ...
DISPLAY Guest Storage (ESA/390)
Chapter 2. CP Commands 303