z/VM: CP Commands and Utilities Reference - z/VM - IBM

DISPLAY ACCESS LIST
DISPLAY ACCESS LIST
►►
Display
Authorization
Purpose
Usage Notes
Responses
ACCList
Privilege Class: G
Use the DISPLAY ACCESS LIST command to display entries in your virtual
machine’s host access list.
1. If you write a program or EXEC that parses the output of this command, you
should avoid a dependency on the ordering of the columns in the output. Your
program or EXEC should use the heading line to determine which column
contains a particular piece of information.
Response 1:
286 z/VM: CP Commands and Utilities Reference
ALET ACC FAULTS ASIT SPACE IDENTIFICATION
tttttttt {R/O} {ASYNCH} {aaaaaaaaaaaaaaaa} sssssssssssssssssssssssssssssssss
{R/W} {SYNCH } {**REVOKED** }
nnnn TOTAL ENTRIES: vvvv VALID, rrrr REVOKED, uuuu UNUSED
tttttttt
is the access list entry token (ALET) corresponding to the access list entry (8
hexadecimal digits).
R/O
indicates that the access list entry can only be used for read references to the
address space.
R/W
indicates that the access list entry can be used for read and write references to
the address space.
ASYNCH
indicates that page-fault handshaking applies to the access list entry.
SYNCH
indicates that page-fault handshaking does not apply to the access list entry.
aaa...aaa
is the address space identification token (ASIT) for the address space
designated by the access list entry (16 hexadecimal digits).
**REVOKED**
indicates that the access list entry previously designated an address space, but
access to that address space has been revoked (the access list entry is in the
revoked state). The SPACE IDENTIFICATION field is left empty for revoked
access list entries.
►◄