z/VM: CP Commands and Utilities Reference - z/VM - IBM

DETACH (Real Device)
OSA Open Systems Adapter
SWCH Dynamic Switching device
PRT Printer
PUN Card punch
RDR Card reader
TAPE Magnetic tape
DEV Any other device
LINE Communication line
Response 1:
{type vdev} DETACHED BY originator [PRIMARY DUPLEX ]
{vdev... } [SECONDARY DUPLEX]
{vdev-vdev}
is the response sent to the device owner (if the device owner is not the primary
system operator). Note that the response refers only to the virtual device number
(vdev) because this is the number by which the owner knows the device.
Response 2:
{type rdev} DETACHED {userid [vdev]} [PRIMARY DUPLEX ]
{rdev... } {SYSTEM } [SECONDARY DUPLEX]
{rdev-rdev}
{type ldev}
{ldev... }
{ldev-ldev}
is the response issued to the originator of the DETACH (real device) command if he
or she is not the owner of the device or devices. When the response is for a single
device (rdev or ldev), the virtual device number and the duplex state of the device
will appear in the responses following userid. Because the secondary volume of a
duplex pair cannot be attached to the system, SECONDARY DUPLEX will only be
issued when detaching from another user ID.
Response 3:
{type rdev} DETACHED {userid [vdev]} BY originator [PRIMARY DUPLEX ]
{rdev... } {SYSTEM } [SECONDARY DUPLEX]
{rdev-rdev}
{type ldev}
{ldev... }
{ldev-ldev}
is the response sent to the primary system operator if another user (the originator)
issued the DETACH (real device) command. When the response is for a single
device (rdev or ldev), the virtual device number and the duplex state of the device
will appear in the response following the userid. The secondary volume of a duplex
pair cannot be attached to the system, therefore SECONDARY DUPLEX will only
be issued when detaching from another user ID.
Response 4:
{TAPE rdev} DETACHED userid BY originator {, TAPE VOLUME(S) UNLOADED }
{rdev... } { TAPE VOLUME(S) NOT UNLOADED}
{rdev-rdev}
is the response issued to the system operator when one or more tape volumes are
being detached.
Response 5:
248 z/VM: CP Commands and Utilities Reference