z/VM: CP Commands and Utilities Reference - z/VM - IBM

Messages
indicates that the path was not varied online because the associated subchannel for
this device is disabled (offline). The subchannel needs to be varied online to be
enabled. Once the subchannel is enabled, the path can be varied online.
yy is the channel path identifier.
rdev
is the real device number.
Response 17: Device is BOXED:
PATH yy NOT VARIED ONLINE TO DEVICE rdev
Device is BOXED.
indicates that the path has not been made available (varied online) to the device
because the device is BOXED.
If the path specified was marked ’offline by an authorized user’ (as a result of a
previous VARY OFF PATH command), then this path will no longer be marked that
way. If a previous VARY ON DEVICE command failed because no paths were
available to this device, then it may have been due to all paths to the device being
in the ’offline by authorized user’ state. If so, then a subsequent VARY ON DEVICE
command may now be successful because it can use this path.
yy is the number of the path not varied online because the device is BOXED.
rdev
is the real device number.
HCP003E Invalid option - {option|command
contains extra option(s) starting with
option}
HCP009E Invalid range - range
HCP021E A real device number was not supplied
or it is invalid.
HCP026E Operand missing or invalid
HCP040E Device {rdev|vdev|ldev} does not exist
HCP846E Invalid channel path identifier.
HCP1150E DASD {rdev} is not a valid base
exposure.
HCP1280E Device vdev not usable; reserve lost
[by userid as vdev]
HCP1281I Path channel to device device now
offline; path groupid mismatch.
HCP1282I Path {yy} to device {rdev} has been
forced offline; a configuration change
was detected.
HCP1550E value is an invalid device class.
VARY PATH
HCP6000E The range of device numbers cannot
exceed 256.
Chapter 2. CP Commands 1707