z/VM: CP Commands and Utilities Reference - z/VM - IBM

define cmd tell epname hcpxmgms ibmclass a privclasses a
Ready;
define command tell ibmclass b privclasses b
Ready;
define command tell anytime privclassany
Ready;
Important Note: Normally, it is not a good practice to define a CP command that
has the same name as a command, exec, or function belonging
to another z/VM subsystem. (This newly-defined command will
interfere with the CMS TELL command.) However, in this case,
we thought we would show you an example of how to create a
“synonym” for a common CMS command that could be used by
novice z/VM users when they accidentally drop out of their CMS
session into CP.
Response 2:
To define 2 new commands, CONTINUE and RESUME, which behave like the CP
BEGIN command, enter the following:
define cmd continue abbr 4 epname hcpcmcbe ibmclass g priv g
Ready;
define command resume epname hcpcmcbe ibmclass g priv g
Ready;
In this example, the CONTINUE and RESUME commands:
v Have the same entry point and syntax as the CP BEGIN command,
v Are IBM class G,
v Are privilege class G, and
DEFINE COMMAND / CMD
v Can only be issued after logon.
Additionally, the CONTINUE command has a minimum abbreviation of 4 (CONT)
and the RESUME command has no minimum abbreviation.
Chapter 2. CP Commands 139