z/VM: CP Commands and Utilities Reference - z/VM - IBM

SPOOL
1456 z/VM: CP Commands and Utilities Reference
DEST OFF
indicates that the resulting spool files are processed by a device specifically
started, or they are defaulted to OFF. OFF is the initial setting of the destination
value for virtual devices.
FLash ALL
FLash nnn
signifies that a form overlay contained in the 3800 printer is to be superimposed
(or flashed) onto the specified number of copies of the output. The operand
name, 1- to 4-characters long, identifies the forms overlay to be used in the
projection. The operand nnn must be in the range from 0 to 255. The number
specifies that the first nnn copies of output are to be flashed.
For example, if you specify COPY 4 and FLASH name 2, the first two copies of
your file are flashed, while the last two copies remain unflashed. If ALL is
specified, the flash count matches the copy count. ALL is the default.
FLash OFF
resets the flash parameters. Blanks are inserted into the flash name field of the
specified spool file or files, and the count is set to 0.
MOdify name n
assigns a copy modification module to be used when printing the spool file or
files on the 3800. This function makes it possible to alter text by either
preventing the printing of certain information or adding labels to output. The
name must be one to four characters long.
The operand n selects one of the character sets specified by the CHARS
operand, to be used for the copy modification text. The values 0, 1, 2, and 3
correspond to the order in which the table names have been specified. If no n is
specified, the first character set (0) is assumed.
MOdify OFF
resets the modify parameters. Blanks are inserted into the modify name field of
the spool file or files and, when printed, no modification occurs. The modify
number n is set to 0.
FCB name
FCB 6
FCB 8
FCB 10
FCB 12
specifies the forms control buffer to be used when printing the spool file or files
on the 3800 printer. The operand name is the 1- to 4-character name of an FCB
image or the number 6, 8, 10, or 12. This number tells the 3800 to print the
entire spool file at 6, 8, 10, or 12 lines per inch, regardless of the size of the
paper that is currently loaded. An FCB specified at 10 will print only on a 3800
model 3 printer.
FCB OFF
resets the FCB parameter. Blanks are inserted into the FCB name field of the
spool file or files and, when printed, a default FCB will control the vertical
spacing of the output text.
CHars name0 name1...
CHars name0 CHars name1...
specifies the name of the character set or sets used when printing the spool file
or files on the 3800 printer. Each name must be from one to four characters
long, with a maximum of four names specified. The multiple use of CHARS
need only be used if namen would conflict with an option name (for example,