z/VM: CP Commands and Utilities Reference - z/VM - IBM

SET STGEXEMPT
►►
Set
Authorization
Purpose
Operands
STGEXempt
Usage Notes
Responses
userid
ON
OFF
Privilege Class: A, B, C
Use SET STGEXEMPT to control the state of free storage limit detection for virtual
machines.
userid
specifies the userid for which free storage limit detection is to be disabled or
enabled.
ON
specifies that the userid is exempt from free storage limit detection.
OFF
specifies that the userid is subject to free storage limit detection.
1. The SET STGEXEMPT command sets the state of free storage limit detection
for the userid. If you exempt a userid from free storage limit detection, usage of
CP storage in support of the userid is unbounded. If you subject the userid to
free storage limit detection, CP will detect if too much CP storage is consumed
in support of the userid and if so, the userid will be stopped or possibly forced
off the system.
Response 1:
Userid USERID is
{exempt from} free storage limit detection
{subject to }
is the response if the specified userid was not previously {exempt from|subject to}
free storage limit detection. There may be an additional response saying that free
storage limit detection is off for the system.
Response 2:
Userid USERID is already
{exempt from} free storage limit detection
{subject to }
SET STGEXEMPT
►◄
Chapter 2. CP Commands 1397