z/VM: CP Commands and Utilities Reference - z/VM - IBM

DEFINE
HCP092E Device vdev not defined; device vdev
already defined
HCP094E Storage exceeds allowed maximum of
nnn {M|K}
HCP101E DASD vdev forced R/O; R/O by {nnnn
users|userid} [; stable by {nnnn
users|userid}]
HCP102E DASD vdev forced R/O; R/W by {nnnnn
users|userid} [; stable by userid]
HCP103E DASD vdev forced R/O; R/W by {nnnnn
users|userid}; R/O by {nnnnn
users|userid} [; stable by userid]
HCP104E userid vdev not linked; R/O by {nnnnn
users |userid} [; stable by {nnnn
users|userid}|{exclusive by userid}]
HCP105E userid vdev not linked; R/W by { nnnnn
users|userid} [; {stable by
userid}|{exclusive by userid}]
HCP106E userid vdev not linked; R/W by {nnnnn
users|userid}, R/O by {nnnnn
users|userid} [; stable by userid]
HCP107E userid vdev not linked; not in CP
directory
HCP108E userid vdev not linked; volid volid not
mounted
HCP109E userid vdev not linked; invalid link
device
HCP110E userid vdev not linked; type vdev
already defined
HCP117E Userid userid not linked; volid volid
conflict
HCP153E Device {vdev|range} exceeds maximum
number of virtual devices
HCP195E alias_name is already a substitute
114 z/VM: CP Commands and Utilities Reference
HCP259E SIZE parameter missing or invalid
HCP260E DEFINE command processing cannot
complete due to errors
HCP349E String supplied does not match
storage contents
HCP372E Invalid location for exit; command
rejected
HCP373E Exit already defined at location;
command rejected
HCP645E Vector facility not available
HCP659E The vector cannot be defined because
vector nn already exists.
HCP661E The vector cannot be defined because
CPU nn does not exist.
HCP662I No real vector facility is available to
service vector(s) nn {nn...}.
HCP663E The vector cannot be defined because
no real vector facility is installed.
HCP664I No real vector facility is available to
service non-dedicated users.
HCP844E The device is not defined due to an
invalid control unit type.
HCP864E Partition pname not found
HCP1003E module was not found
HCP1006E The command processing cannot
complete because system is not
running in EMIF mode
HCP1014E A required option is missing.
HCP1015E [XAUTOLOG failed for userid:]
Insufficient storage is available to
satisfy your request.