z/VM: CP Commands and Utilities Reference - z/VM - IBM

v Enter DEST * to have the printer process files regardless of destination
identifiers.
FCB fcbname
specifies the 1- to 4-character suffix of the name of the default forms control
buffer (FCB) to use after a cold start or force start. This must correspond to one
of the FCB images added to an image library. For example, if you enter:
set rdevice 0003 type 3203 fcb fcb8
The image library must contain a member named 3203FCB8.
The number of lines to be printed on the separator page is determined by the
FCB loaded on the printer. The default separator page contains 58 lines of data.
If the page length defined by the FCB is less than the default separator page
length, the separator page data must be customized in order to fit on a single
page. This may be done using CP Exit points that are provided in separator
page processing. See the z/VM: CP Exit Customization for details.
FOLDup Yes
FOLDup No
specifies whether lowercase should be folded (translated) into uppercase. The
default is NO.
FOrm operform
is the current spooling form number that the printer can process. This form is
the default operator form for the real printer. Specify this parameter when you
are defining a new printer or when you are redefining an existing non-impact
printer to be an impact printer. You can specify this parameter in one of the
following ways:
v FORM operform
operform specifies a 1- to 8-character operator form number for the files the
printer can process.
v FORM *
The asterisk indicates the printer can process files regardless of form
number.
v FORM STANDARD
STANDARD indicates the type of paper to which the installation has assigned
the name STANDARD. Each installation establishes its own set of form
names, assigns those form names to types of paper, and tells the operations
staff and end users the form names for the different types of paper.
FORM STANDARD is the default.
IMAGE_LIBrary imagelib
specifies the image library to use after a cold start. The default for
IMAGE_LIBRARY is IMAGnnnn. nnnn is the device type number.
INDex nn
specifies the position at which to start printing. nn is a number from 1 to 31.
The default is 1. If the defined printer is not a 3211, the INDEX option is
ignored.
LIMit nnnnnnnnnn
LIMit NONE
specifies the maximum number of records of a file to be printed. You can
specify up to 10 digits. NONE is the default.
SEParator Yes
SET RDEVICE Impact Printers
Chapter 2. CP Commands 1353