27.12.2012 Views

z/VM: CP Commands and Utilities Reference - z/VM - IBM

z/VM: CP Commands and Utilities Reference - z/VM - IBM

z/VM: CP Commands and Utilities Reference - z/VM - IBM

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SET RDEVICE Communication Controllers<br />

►►<br />

Set<br />

Authorization<br />

Purpose<br />

RDEVice<br />

Oper<strong>and</strong>s<br />

rdev<br />

rdev1-rdev2<br />

TYpe<br />

Privilege Class: B<br />

BSC_ADAPTer<br />

<strong>IBM</strong>1_ADAPTer<br />

TELE2_ADAPTer<br />

3705<br />

Use this SET RDEVICE comm<strong>and</strong> to tell <strong>CP</strong> that line adapters or communication<br />

controllers are at specific device addresses.<br />

rdev<br />

rdev1-rdev2<br />

specifies one or more real device numbers to be defined or changed. Each rdev<br />

specified must be a hexadecimal number between X'0000' <strong>and</strong> X'FFFF'. The<br />

maximum number of devices allowed within a range is 256.<br />

TYpe<br />

specifies the type of device.<br />

BSC_ADAPTer<br />

specifies an <strong>IBM</strong> Binary Synchronous Terminal Control Type II for a 3705,<br />

3725, or 3745.<br />

The BSCA adapter is supported as dedicated-only.<br />

SET RDEVICE Communication Controllers<br />

SET_ADDRess<br />

SET_ADDRess<br />

<strong>IBM</strong>1_ADAPTer<br />

specifies that an <strong>IBM</strong> Terminal Adapter Type I attaches a 1050 or 2741 to a<br />

3705, 3725, or 3745.<br />

TELE2_ADAPTer<br />

specifies that a <strong>CP</strong>T-TWX (Models 33/35) Terminal, 3101, 3151, 3161,<br />

3162, or 3163, attaches to a Line Interface Base Type I in a 3705, 3725, or<br />

3745.<br />

SET_ADDRess n<br />

is the set address (SAD) comm<strong>and</strong> to be entered for a telecommunication<br />

line attached to a control unit. The default is 4.<br />

The values for n <strong>and</strong> the corresponding comm<strong>and</strong>s are:<br />

0 SADZERO<br />

1 SADONE<br />

2 SADTWO<br />

3 SADTHREE<br />

4 (No SAD comm<strong>and</strong> is entered)<br />

3705<br />

defines the base address that loads the 3705 communications controller.<br />

4<br />

n<br />

►◄<br />

Chapter 2. <strong>CP</strong> <strong>Comm<strong>and</strong>s</strong> 1343

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!