z/VM: CP Commands and Utilities Reference - z/VM - IBM

IPTimeout: nnn QueueStorage: nnn
Portname: name RDEV: nnn Controller: userid VDEV: nnn
Authorized userids:
user(1) VLAN: vlan(1) vlan(2) vlan(3) vlan(4)
user(2) VLAN: vlan(1) vlan(2) vlan(3) vlan(4) ...
VSWITCH Connection:
RX packets: rxpackets Discarded: nnn Errors: nnn
TX packets: txpackets Discarded: nnn Errors: nnn
RX bytes: rxbytes TX bytes: txbytes
Device: vdev Unit: nnn Role: role
Options: options
Unicast IP Addresses:
ipaddr MAC: macaddr
Adapter Owner: userid NIC: dev Name: portname
Porttype: type
RX packets: rxpackets Discarded: nnn Errors: nnn
TX packets: txpackets Discarded: nnn Errors: nnn
RX bytes: rxbytes TX bytes: txbytes
Device: vdev Unit: nnn Role: role
VLAN: nnnn status
Router: type ipversion vlan
Options: options
Unicast IP Addresses:
ipaddr MAC: macaddr
ipaddr MAC: macaddr
Multicast IP Addresses:
mpaddr MAC: macaddr
mpaddr MAC: macaddr
is the normal response from this command.
VSWITCH
switchname uniquely identifies the Virtual Switch.
Type
type is the VSWITCH TYPE.
Connected
count indicates the number of coupled adapters.
QUERY VSWITCH
Maxconn
max indicates the maximum number of connections. The value is always
INFINITE for a virtual switch.
persistence
indicates whether the VSWITCH is PERSISTENT or TRANSIENT. The value is
always PERSISTENT for a virtual switch.
restriction
indicates whether the VSWITCH is RESTRICTED or UNRESTRICTED. All z/VM
VSWITCHes are RESTRICTED.
routermode
for a VSWITCH of type IP, indicates whether NONROUTER or PRIROUTER
was set for the VSWITCH. Otherwise, indicates the VSWITCH is of type
ETHERNET.
Accounting: ON
Accounting: OFF
indicates whether accounting records will be generated for this VSWITCH.
Chapter 2. CP Commands 1145