z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY VSWITCH
QUERY VSWITCH
►►
►
Query
Notes:
ACTive
DETails
Authorization
Purpose
Operands
VSWITCH
ALL
NAME
ACCesslist
switchname
VLAN ANY
VLAN
VLAN
Privilege Class: B, G
(1)
vlanid
NONE
1 You can specify the operands in any order, as long as ALL is the first operand specified.
Use QUERY VSWITCH to display information about the designated Virtual Switch,
or all Virtual Switches.
A class G user can view information about a Virtual Switch if the user is in the CP
access list for the Virtual Switch, or if the user currently has an adapter connected
to it.
A class B user can view information about any Virtual Switch in the system.
ALL
displays information for all possible Virtual Switches. This is the default value
when an explicit NAME switchname is omitted.
NAME switchname
restricts the response to the Virtual Switch with the specified switchname.
ACTive
displays information about each active connection. Each active connection
represents a simulated Network Interface Card (NIC) that has been connected
to the Virtual Switch. The information displayed includes:
v Identity of the Virtual Switch.
1140 z/VM: CP Commands and Utilities Reference
v The list of users connected to each Virtual Switch, including the VLAN IDs
each is authorized to use.
v IP addresses registered to the adapter.
ACCesslist
displays a list of users who are authorized to connect to each Virtual Switch
with a simulated network adapter.
Note: This is the list authorized through the use of the SET VSWITCH
command using the GRANT and REVOKE operands. If the Virtual
►
►◄