z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY VIRTUAL STORAGE/STORE
Messages
Extent Specification Field Definitions:
boundaryaddresu
the boundary address as specified in the DEFine STORage command. u is
the unit of measure.
ssssssssssssssu
is 1-14 decimal digits followed by a units suffix, used to define an extent
size.
nnnnu
is the decrement specified in DEFINE STORAGE used to modify the extent
start boundary address, expressed as 1-4 decimal digits followed by a units
suffix (which must be a smaller unit of measure than that used for the start
boundary it modifies). The decrement is subtracted from the base start
boundary specification to determine the effective extent start boundary
address.)
Address Range Fields:
begadres_begadres
is the 16-digit extent start address expressed in hexadecimal (guaranteed to
end in X'00000', a megabyte boundary)
endadres_endadres
is the 16-digit extent end address expressed in hexadecimal (guaranteed to
end in X'FFFFF', one less than a megabyte boundary)
HCP263E Too many operands were supplied for
this command.
1126 z/VM: CP Commands and Utilities Reference