z/VM: CP Commands and Utilities Reference - z/VM - IBM

CPY *nnn
identifies the number of copies requested for the spool file. This is shown as a
3-digit number (nnn). An asterisk (*) indicates that the 3800 printer prints each
page from the spooled output files nnn times before going on to the next page.
If the asterisk (*) is not present, the entire file is printed sequentially.
READY
NOTREADY
indicates whether the device is in a ready or not-ready status. You can change
the status with the READY and NOTREADY commands.
FORM userform
displays the form associated with the device and assigned to the spool files as
they are created.
TO userid
identifies the virtual machine that receives output from your virtual punch.
RDR
PRT
PUN
identifies the spool file queue to receive your punch output.
DIST distcode
identifies the spool file distribution code.
DEST dest
identifies the destination value to be assigned to each spool file created on the
device. If the destination value has not been changed by a SPOOL command,
the default is OFF.
FLASH name ccc
name is the name of the forms overlay frame superimposed on the output
pages if the file is printed on a 3800 printer. ccc is the number of copies printed
while the forms overlay frame is superimposed on the output pages. The default
for ccc is 000.
CHAR char ...
identifies the character sets used to generate output if the file is printed on a
3800 printer.
MDFY cmod
identifies the copy modification module used to alter output text if the file is
printed on a 3800 printer.
n identifies the copy modification character set number. If no copy modification
character is set, n is 0.
FCB fcb
identifies the forms control buffer used in the vertical formatting of a page if the
file is printed on a 3800 printer.
type
identifies an IBM punch type.
EOF
NOEOF
closes (EOF), or leaves open (NOEOF), the spool file on the specified device
regardless of the CONT setting for the device.
OPEN spid
QUERY VIRTUAL PUNCH
Chapter 2. CP Commands 1121