z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY TRSOURCE
ID identifies the trace, as specified on the ID xxx parameter of the
TRSOURCE...TYPE DATA... command.
TYPE
indicates the type of trace.
SET
is the name used to group traces into a logically related set as specified on
SET xxx parameter of the TRSOURCE ID traceid command or NULL.
STATUS ENABLED
STATUS DISABLED
ENABLED indicates that the defined trace is active. DISABLED indicates that
the trace is inactive.
LOC nnnnnn
LOC modname+disp
indicates the host address of the instruction that, when executed, triggers
tracing information.
The operand modname+disp indicates the module name and displacement of
the instruction that, when executed, triggers tracing information.
INSTRUCTION
identifies the instruction string located at the indicated location.
DATALINKS
defines the information collected when the trace springs. If no data links were
specified for this trace ID, NO DATALINKS DEFINED is displayed under the
DATALINKS header line.
IF determines whether a subsequent THEN statement or ELSE statement is
executed.
THEN
indicates that subsequent datalinks and IF statements are executed only if the
preceeding IF statement is true.
ELSE
indicates that subsequent datalinks and IF statements are executed only if the
preceeding IF statement is false.
ENDIF
closes the last unclosed IF statement.
Response 5
ID TYPE SET STATUS
traceid NONE setname DISABLED
1056 z/VM: CP Commands and Utilities Reference
is displayed for traces of unspecified type, or type NONE.
ID identifies the name of the trace, as specified on the ID xxx parameter of the
TRSOURCE command.
TYPE
indicates that the TYPE xxx parameter was not specified on the TRSOURCE ID
traceid command.
SET
is the name used to group traces into a logically related set as specified on
SET xxx parameter of the TRSOURCE ID traceid command.