z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY TERMINAL
ESCAPE OFF
displays the logical escape character in effect for your virtual machine (char), or
indicates that no logical escape character is allowed (OFF).
TABCHAR char
TABCHAR OFF
displays the tab character symbol in effect for your virtual machine (char), or
indicates that no logical tab character is defined (OFF).
LINESIZE nnn
LINESIZE OFF
specifies the maximum allowable line length for terminal output that is in effect
for your virtual machine. OFF specifies that the terminal output line length is not
adjusted by CP.
ATTN ON
ATTN OFF
indicates whether the attention signal is to be reflected on keyboard or printer
terminals. If ON, the printer reflects it as an exclamation point (!) followed by a
carriage return.
APL ON
APL OFF
indicates whether CP is to use the APL terminal translation tables or the normal
translation tables. If APL is ON, CP uses the APL translation tables.
TEXT ON
TEXT OFF
indicates whether CP is to use the TEXT terminal translation tables or the
normal terminal translation tables. If TEXT is ON, CP uses the TEXT translation
tables.
MODE CP
MODE OFF
indicates whether one or more attentions force your virtual machine into the CP
environment, or whether one or more attentions are reflected to your virtual
machine. If MODE is CP, one attention forces your virtual machine into the CP
environment.
HILIGHT ON
HILIGHT OFF
ON means CP highlights the command redisplay line. OFF means CP displays
the command redisplay line at normal intensity.
CONMODE 3215
CONMODE 3270
CONMODE NONE
indicates the console mode of your virtual console. 3215 indicates that CP
provides 3215 CCW processing, and 3270 indicates that it provides 3270 CCW
processing. NONE indicates that your virtual machine does not currently have a
console defined.
BREAKIN IMMED
BREAKIN GUESTCTL
lets you control break-in by CP for full-screen guests. The GUESTCTL option
specifies that, while in full-screen mode, messages from CP are displayed only
when you press the BRKKEY key. If you specify GUESTCTL, CP break-in still
occurs if you request a CP function or if a priority message is pending for your
virtual machine. GUESTCTL is specified using TERMINAL BREAKIN. If you
specify IMMED, which is the default, break-in by CP takes place on any
Chapter 2. CP Commands 1027