TVIP40000 Bedienungsanleitung - ABUS Security-Center
TVIP40000 Bedienungsanleitung - ABUS Security-Center TVIP40000 Bedienungsanleitung - ABUS Security-Center
292 320: GMT 08:00 Beijing, Chongging, Hong Kong, Kuala Lumpur, Singapore, Taipei 360: GMT 09:00 Osaka, Sapporo, Tokyo, Seoul, Yakutsk 380: GMT 09:30 Adelaide, Darwin 400: GMT 10:00 Brisbane, Canberra, Melbourne, Sydney, Guam, Vladivostok 440: GMT 11:00 Magadan, Solomon Is., New Caledonia 480: GMT 12:00 Aucklan, Wellington, Fiji, Kamchatka, Marshall Is. 520: GMT 13:00 Nuku'Alofa daylight_enable 6/6 enable automatic daylight saving to time daylight_dstactual mode daylight_auto_beg intime daylight_auto_end time updateinterval 0, restore 0, reset 0, zone 6/7 check if current time is under daylight saving time. string[19] 6/7 display the current daylight saving begin time. (product dependent) string[19] 6/7 display the current daylight saving end time. 3600, 86400, 604800, 2592000 (product dependent) 6/6 0 to Disable automatic time adjustment, otherwise, it means the seconds between NTP automatic update interval. 7/6 Restore the system parameters to default value after seconds. 7/6 Restart the server after seconds if is non-negative. restoreexceptnet 7/6 Restore the system parameters to default value except (ipaddress, subnet, router, dns1, dns2, pppoe). This command can cooperate with other “restoreexceptXYZ” commands. When cooperating with others, the system
293 parameters will be restored to default value except a union of combined results. restoreexceptdst 7/6 Restore the system parameters to default value except all daylight saving time settings. This command can cooperate with other “restoreexceptXYZ” commands. When cooperating with others, the system parameters will be restored to default value except a union of combined results. restoreexceptlang 7/6 Restore the system parameters to default value SubGroup of system: info (The fields in this group are unchangeable.) NAME VALUE SECURITY (get/set) except custom language file user uploaded. This command can cooperate with other “restoreexceptXYZ” commands. When cooperating with others, the system parameters will be restored to default value except a union of combined results. DESCRIPTION modelname string[40] 0/7 Internal model name of server (eg. IP7139) extendedmodelname string[40] 0/7 ODM specific model name of server (eg. serialnumber DCS-5610). If it is not ODM case, this field will be equal to “modelname” 0/7 12 characters mac address without hyphen connected firmwareversion string[40] 0/7 The version of firmware, including model, company, and version number in the format language_count 0/7 number of webpage language available on the server language_i string[16] 0/7 Available language lists customlanguage_maxcount 0/7 Maximum number of custom language supported on the server customlanguage_count 0/7 Number of custom language which has been uploaded to the server
- Page 241 and 242: 5. Brugerfunktioner Åbn videoserve
- Page 243 and 244: Lokal optagelse Der kan startes ell
- Page 245 and 246: “Hostnavn” Teksten viser titlen
- Page 247 and 248: Oprettelse og installation af certi
- Page 249 and 250: “UPnP portvideresendelse TIL” U
- Page 251 and 252: 6.5.5 HTTPS “HTTPS-port” Det er
- Page 253 and 254: 6.5.8 Multicast-overførsel Multica
- Page 255 and 256: 7.2 DDNS-adgang via router Hvis net
- Page 257 and 258: 9. Audio og video “Videotitel”
- Page 259 and 260: 9.3 Grundindstilling Videooptioner
- Page 261 and 262: Grønt område: Bevægelse blev reg
- Page 263 and 264: “Kamera ID” Fastlægger kamerae
- Page 265 and 266: Indtast HEX-koden for den ønskede
- Page 267 and 268: Oversigt over kommandoer: Kommando
- Page 269 and 270: Hændelsestidsplan “Søn” - “
- Page 271 and 272: Filnavnet er opbygget på følgende
- Page 273 and 274: 14. Optagelse 273 Dansk Området Op
- Page 275 and 276: Søgning efter og visning af optage
- Page 277 and 278: 277 Dansk Genstart af system Tryk p
- Page 279 and 280: 21. Tekniske data 279 Dansk Typenum
- Page 281 and 282: 281 Dansk TELEFONAKIEBOLAGET ERICSS
- Page 283 and 284: Motion JPEG QCIF Fixed Quality Medi
- Page 285 and 286: B.) HTTP/CGI Command In URL syntax
- Page 287 and 288: http:///cgi-bin/viewer/getparam.cgi
- Page 289 and 290: \r\n where is =\r\n [] Only the p
- Page 291: 291 -200: GMT-05:00 Eastern Time, N
- Page 295 and 296: user_i_pass password[64] 7/6 User
- Page 297 and 298: Subgroup of network: http NAME VALU
- Page 299 and 300: Subgroup of network: rtp NAME VALUE
- Page 301 and 302: 301 function 0(not support), 1(supp
- Page 303 and 304: 303 1 is worst quality and 5 is the
- Page 305 and 306: Group: imagepreview_c for n channel
- Page 307 and 308: Group: tampering_c for n channel, N
- Page 309 and 310: uart 0 ~ (m-1), m is uart count 1/4
- Page 311 and 312: logo_link string[40] 1/6 Hyperlink
- Page 313 and 314: 313 Bit 9 => Reserved bit; Invalida
- Page 315 and 316: wireless_802dot1 1g wireless_encryp
- Page 317 and 318: action_do_i_enable action_do_i_dura
- Page 319 and 320: snapshot_postevent 0 ~ 7 6/6 The nu
- Page 321 and 322: dest cf, 0~4 6/6 The destination to
- Page 323 and 324: autospeed 1 ~ 5 1/7 Auto pan/patrol
- Page 325 and 326: Query status of the digital output
- Page 327 and 328: Delete Remove an account from serve
- Page 329 and 330: Camera Control (capability.ptzenabl
- Page 331 and 332: move home Move to home ROI. up Move
- Page 333 and 334: Method: GET/POST Syntax: http:///cg
- Page 335 and 336: Syntax: http:///cgi-bin/admin/ipfil
- Page 337 and 338: x-sessioncookie: string[22] accept:
- Page 339 and 340: Return: HTTP/1.0 200 OK\r\n Content
- Page 341 and 342: http:///cgi-bin/admin/lsctrl.cgi?cm
293<br />
parameters will be restored to default value<br />
except a union of combined results.<br />
restoreexceptdst 7/6 Restore the system parameters to default value<br />
except all daylight saving time settings.<br />
This command can cooperate with other<br />
“restoreexceptXYZ” commands. When<br />
cooperating with others, the system parameters<br />
will be restored to default value<br />
except a union of combined results.<br />
restoreexceptlang 7/6 Restore the system parameters to default value<br />
SubGroup of system: info (The fields in this group are unchangeable.)<br />
NAME VALUE SECURITY<br />
(get/set)<br />
except custom language file user uploaded.<br />
This command can cooperate with other<br />
“restoreexceptXYZ” commands. When<br />
cooperating with others, the system parameters<br />
will be restored to default value<br />
except a union of combined results.<br />
DESCRIPTION<br />
modelname string[40] 0/7 Internal model name of server (eg. IP7139)<br />
extendedmodelname string[40] 0/7 ODM specific model name of server (eg.<br />
serialnumber <br />
DCS-5610). If it is not ODM case, this field will be<br />
equal to “modelname”<br />
0/7 12 characters mac address without hyphen<br />
connected<br />
firmwareversion string[40] 0/7 The version of firmware, including model,<br />
company, and version number in the format<br />
<br />
language_count 0/7 number of webpage language available on the<br />
server<br />
language_i string[16] 0/7 Available language lists<br />
customlanguage_maxcount 0/7 Maximum number of custom language<br />
supported on the server<br />
customlanguage_count 0/7 Number of custom language which has been<br />
uploaded to the server