vdoc

414 References
Simpson, J. A. 1981. “Foundations of Metrology.” Journal of Research of the National Bureau
of Standards 86, no. 3 (May/June): 36–42.
Taylor, B. N. 1995. NIST Special Publication 881, Guide for the Use of the International System
of Units (SI). Gaithersburg, MD: NIST.
Wunchell, W. 1996. Inspection and Measurement in Manufacturing. Dearborn, MI: Society of
Manufacturing Engineers.
Zipin, R. B. 1971. “Dimensional Measurements and Standards in Manufacturing,” Bendix
Technical Journal 1, no. 4: 15–19.
Chapter 12
American National Standards Institute. 2002. ANSI Z540-1-1994 (Revised). American
National Standard for Calibration: Calibration Laboratories and Measuring and Test
Equipment (General Requirements). Boulder, CO: ANSI.
Bucher, J., ed. 2004. The Metrology Handbook. Milwaukee: ASQ Quality Press.
Bucher, J. 2006. The Quality Calibration Handbook: Developing and Managing a Calibration
Program. Milwaukee: ASQ Quality Press.
International Organization for Standardization. 1993. ISO VIM. International Vocabulary of
Basic and General Terms in Metrology. 2nd ed. Geneve, Switzerland: ISO.
International Organization for Standardization. 2005. ISO 17025. General Requirements for
the Competence of Testing and Calibration Laboratories. Geneve, Switzerland: ISO.
National Conference of Standards Laboratories. 1996. NCSL-RP-1. Establishment and
Adjustment of Calibration Intervals. Boulder, CO: NCSL.
Pennella, R. 2004. Managing the Metrology System. Milwaukee: ASQ Quality Press.
Rice, G. 1976. Measurement Systems and the Standards Laboratory. Conference on the
Management of Laboratory Instruments. Cairo, Egypt.
Vogt, T. 1980. Optimizing Calibration Recall Intervals and Algorithms. Washington D.C.:
National Institute of Standards and Technology Press NBS-GCR-80-283.
Chapter 13
Automotive Industry Action Group, Measurement Systems Analysis (MSA) Work
Group. 2002. Measurement Systems Analysis Reference Manual. 3rd ed. Dearborn, MI:
AIAG Press.
Barrantine, L. 2003. Concepts for R&R Studies. 2nd ed. Milwaukee: ASQ Quality Press.
Duncan, A. J. 1986. Quality Control and Industrial Statistics. 5th ed. Homewood, Illinois:
Irwin.
International Business Machines Corporation. 1986. Process Control, Capability, and
Improvement. Thornwood, New York: The Quality Institute.
Montgomery, D. C. 2005. Introduction to Statistical Quality Control. 5th ed. New York: John
Wiley & Sons.
Chapter 14
American Society of Mechanical Engineers. 1994. Y14.5M standard. Geometric
Dimensioning and Tolerancing (GD&T). New York: ASME.
American Society of Mechanical Engineers. 2003. Y14.3-2003 Multiview and Sectional View
Drawings. New York: ASME.
American Society for Testing and Materials. 1996. D4356 Standard Practice for Establishing
Consistent Test Method Tolerances. West Conshohocken, PA: ASTM.