vdoc

References 413
Pennella, R. 2004. Managing the Metrology System. Milwaukee: ASQ Quality Press.
Rashed, A. F., and A. M. Hamouda. 1974. Technology for Real Quality. Alexandria, Egypt:
Egyptian University House.
Simpson, J. A. 1981. “Foundations of Metrology.” Journal of Research of the National Bureau
of Standards 86, no. 3 (May/June): 36–42.
Wunchell, W. 1996. Inspection and Measurement in Manufacturing. Dearborn, MI: Society of
Manufacturing Engineers.
Chapter 10
Bosch, J. A. 1984. 66 Centuries of Measurement. Dayton, Ohio: Sheffield Measurement
Division.
Bucher, J., ed. 2004. The Metrology Handbook. 2nd ed. Milwaukee: ASQ Quality Press.
Busch, T. 1966. Fundamentals of Dimensional Metrology. Albany, NY: Delmar.
Busch, T., R. Harlow, and R. Thompson. 1998. Fundamentals of Dimensional Metrology.
3rd ed. Albany, NY: Delmar.
Farrago, F. T. 1968. Handbook of Dimensional Measurement. New York: Industrial Press.
Farago, F. T., and M. Curtis. 1994. Handbook of Dimensional Measurements. New York:
Industrial Press.
Gaylor, J. F. W., and C. R. Shotbolt. 1964. Metrology for Engineers. London: Cassell &
Company.
Schrader, G. F., and A. K. Elshennawy. 2000. Manufacturing Processes and Materials. 4th ed.
Dearborn, MI: Society of Manufacturing Engineers.
Simpson, J. A. 1981. “Foundations of Metrology.” Journal of Research of the National Bureau
of Standards 86, no. 3 (May/June): 36–42.
Wunchell, W. 1996. Inspection and Measurement in Manufacturing. Dearborn, MI: Society of
Manufacturing Engineers.
Chapter 11
American Society of Mechanical Engineers. 1985. ANSI/ASME B89.1.12M-1985 Methods
for Performance Evaluation of Coordinate Measuring Machines. New York: ASME.
American Society of Mechanical Engineers. 1986. ANSI/ASME B46.1-1095 Surface
Texture—Surface Roughness, Waviness, and Lay. New York: ASME.
Bosch, J. A. 1984. 66 Centuries of Measurement. Dayton, OH: Sheffield Measurement
Division.
Bucher, J., ed. 2004. The Metrology Handbook. Milwaukee: ASQ Quality Press.
Drews, W. E. 1978. “How to Measure Roundness.” Tooling and Production (June).
Elshennawy, A. K., I. Ham, and P. H. Cohen. 1988. “Evaluating the Performance of
Coordinate Measuring Machines.” ASQ Quality Progress (January): 59–65.
Fabel, G. 1997. “Machine Vision Systems Looking Better All the Time.” Quality Digest
(October).
Farago, F. T., and M. Curtis. 1994. Handbook of Dimensional Measurements. New York:
Industrial Press.
Heil, P., and R. Daigle. 2004. “Vision Systems Look to the Future.” Quality Digest (March).
Klepp, P. 1998. “The Future of Optical Gaging Equipment.” Quality Digest (July).
National Institute for Standards and Technology. 2003. NIST Handbook 44, Specifications,
Tolerances, and Other Technical Requirements for Weighing and Measuring Devices.
Gaithersburg, MD: NIST.
Reason, R. E. 1960. The Measurement of Surface Texture. London: CleaverHume Press.
Schrader, G. F., and A. K. Elshennawy. 2000. Manufacturing Processes and Materials. 4th ed.
Dearborn, MI: Society of Manufacturing Engineers.