vdoc

412 References
Chapter 7
Bosch, J. A. 1984. 66 Centuries of Measurement. Dayton, OH: Sheffield Measurement
Division.
Bucher, J., ed. 2004. The Metrology Handbook. Milwaukee: ASQ Quality Press.
Busch, T., R. Harlow, and R. Thompson. 1998. Fundamentals of Dimensional Metrology. 3rd
ed. Albany, NY: Delmar.
Farrago, F. T., and M. Curtis. 1994. Handbook of Dimensional Measurement. 2nd ed. New
York: Industrial Press.
Gaylor, J. F. W., and C. R. Shotbolt. 1964. Metrology for Engineers. London: Cassell &
Company.
Pennella, R. 2004. Managing the Metrology System. Milwaukee: ASQ Quality Press.
Rashed, A. F., and A. M. Hamouda. 1974. Technology for Real Quality. Alexandria, Egypt:
Egyptian University House.
Simpson, J. A. 1981. “Foundations of Metrology.” Journal of Research of the National Bureau
of Standards 86, no. 3 (May/June): 36–42.
Wunchell, W. 1996. Inspection and Measurement in Manufacturing. Dearborn, MI: Society of
Manufacturing Engineers.
Chapter 8
Bosch, J. A. 1984. 66 Centuries of Measurement. Dayton, OH: Sheffield Measurement
Division.
Bucher, J., ed. 2004. The Metrology Handbook. Milwaukee: ASQ Quality Press.
Busch, T., R. Harlow, and R. Thompson. 1998. Fundamentals of Dimensional Metrology. 3rd
ed. Albany, NY: Delmar.
Farrago, F. T., and M. Curtis. 1994. Handbook of Dimensional Measurement. 2nd ed. New
York: Industrial Press.
Gaylor, J. F. W., and C. R. Shotbolt. 1964. Metrology for Engineers. London: Cassell &
Company.
Pennella, R. 2004. Managing the Metrology System. Milwaukee: ASQ Quality Press.
Rademaker, G. 2005. “X-Ray Inspection.” Quality Digest (April).
Rashed, A. F., and A. M. Hamouda. 1974. Technology for Real Quality. Alexandria, Egypt:
Egyptian University House.
Simpson, J. A. 1981. “Foundations of Metrology.” Journal of Research of the National Bureau
of Standards 86, no. 3 (May/June): 36–42.
Wunchell, W. 1996. Inspection and Measurement in Manufacturing. Dearborn, MI: Society of
Manufacturing Engineers.
Chapter 9
Bosch, J. A. 1984. 66 Centuries of Measurement. Dayton, OH: Sheffield Measurement
Division.
Bucher, J., ed. 2004. The Metrology Handbook. Milwaukee: ASQ Quality Press.
Busch, T., R. Harlow, and R. Thompson. 1998. Fundamentals of Dimensional Metrology. 3rd
ed. Albany, NY: Delmar.
Farrago, F. T., and M. Curtis. 1994. Handbook of Dimensional Measurement. 2nd ed. New
York: Industrial Press.
Gaylor, J. F. W., and C. R. Shotbolt. 1964. Metrology for Engineers. London: Cassell &
Company.
Jenkins, J. D. 2003. “The Uncertain World of Measurement Credibility.” Quality Digest
(October).