Installation, Maintenance and Operation Manual - Tyco Thermal ...
Installation, Maintenance and Operation Manual - Tyco Thermal ... Installation, Maintenance and Operation Manual - Tyco Thermal ...
1 General information Use of the manual The Installation and Maintenance manual is for Tyco Thermal Controls series resistance heating cable systems on thermally insulated pipes, vessels and associated equipment only. In particular it refers to polymer insulated (PI) series heating cable systems, which feature a specific power output, varying with design parameters, mostly with cable length and voltage. This manual provides general information and shows an overview of the most common installations and applications on PI. In any case, the information provided for specific projects will take precedence over this manual. Figure 1: Typical cable construction Refer to applicable product datasheet for more detailed information. Figure 2: Typical heating element set up Earth leads Connection leads For information regarding other applications contact your Tyco Thermal Controls representative. d Important For the Tyco Thermal Controls warranty to apply, the instructions that are included in this manual and product packages must be followed. The installation must also be in accordance with local National requirements appli- 4 Cable gland Cold leads Heating cable Outer jacket PTFE Protective braid of nickel plated copper strands (max. 18 Ω/km) PTFE/high temperature fluoropolymer sandwich High temperature resistance heating conductor Cable joint between heating cable and cold lead
- Page 1 and 2: Installation, Maintenance and Opera
- Page 6: cable to electrical heat tracing sy
- Page 10: 3 of the heating cable defined by t
- Page 14: 9 d excessive pulling force d kinki
- Page 18: 3.5 Attachment tapes GT-66 Glass cl
- Page 22: Figure 11-12: Cable applied on wire
- Page 26: 4 For some applications, it may be
- Page 30: D In cases where stabilised design
- Page 34: 6.2 Insulation related requirements
- Page 38: 8 System testing WARNING: Fire haza
- Page 42: 9.3 Piping systems repair and maint
- Page 46: 27 28 29 TRIPHASED INSTALLATION REC
- Page 50: C Symptom: No power output. Probabl
1<br />
General information<br />
Use of the manual<br />
The <strong>Installation</strong> <strong>and</strong> <strong>Maintenance</strong> manual is for <strong>Tyco</strong><br />
<strong>Thermal</strong> Controls series resistance heating cable systems<br />
on thermally insulated pipes, vessels <strong>and</strong> associated equipment<br />
only. In particular it refers to polymer insulated (PI)<br />
series heating cable systems, which feature a specific<br />
power output, varying with design parameters, mostly with<br />
cable length <strong>and</strong> voltage. This manual provides general<br />
information <strong>and</strong> shows an overview of the most common<br />
installations <strong>and</strong> applications on PI. In any case, the<br />
information provided for specific projects will take precedence<br />
over this manual.<br />
Figure 1: Typical cable construction<br />
Refer to applicable product datasheet for more detailed<br />
information.<br />
Figure 2: Typical heating element set up<br />
Earth leads<br />
Connection leads<br />
For information regarding other applications contact your<br />
<strong>Tyco</strong> <strong>Thermal</strong> Controls representative.<br />
d Important<br />
For the <strong>Tyco</strong> <strong>Thermal</strong> Controls warranty to apply, the<br />
instructions that are included in this manual <strong>and</strong> product<br />
packages must be followed. The installation must also<br />
be in accordance with local National requirements appli-<br />
4<br />
Cable gl<strong>and</strong><br />
Cold leads<br />
Heating cable<br />
Outer jacket PTFE<br />
Protective braid of nickel plated<br />
copper str<strong>and</strong>s (max. 18 Ω/km)<br />
PTFE/high temperature fluoropolymer s<strong>and</strong>wich<br />
High temperature resistance heating conductor<br />
Cable joint between heating cable <strong>and</strong> cold lead