The New Plex
© Philippe Fournier 2023. All rights reserved. Reproduction prohibited unless advanced written permission is granted by the author. Final self-directed research project completed in fulfilment of the requirements for the Master of Architecture degree at McGill University. Summary: A multiplex is a low-rise multifamily residential building with two or more separately accessed dwelling units, built at a similar scale to a traditional house. To address severe housing shortages, many jurisdictions across North America and around the globe are reforming long-standing zoning laws to permit multiplex construction across vast areas of land which formerly only permitted building single-family houses. This opens up a new frontier of design possibilities for builders: how should these buildings be designed? Though well established across the province of Quebec and once historically common in many other places, multiplexes are rare in the rest of postwar North America, with the majority of private households now dwelling in single-family detached houses. The scale of the housing crisis demands a radical expansion of denser building stock, but the carbon intensity of large-scale new construction poses environmental problems. As an example of ‘missing middle’ housing, multiplexes have many advantages which make them opportune for addressing both the housing and climate crises simultaneously. While increasing density and housing options, plexes have the advantage of being small enough to construct in light wood frame, embodying low carbon and employing local materials and trades. Their human scale and adaptability can allow them to blend unobtrusively within the built character of many established suburban neighborhoods. Their low capital requirements would permit a competitive market to emerge among small builders, while their rapid constructability lends itself well to prefabrication and other efficient construction techniques. This project revisits historical North American multiplex designs, makes the argument for streamlining multiplex construction in contemporary infill suburban contexts, investigates their regulatory and practical constraints, and explores ways of designing the typology in order to improve its environmental performance, cost effectiveness, and above all the quality of life for residents.
© Philippe Fournier 2023. All rights reserved.
Reproduction prohibited unless advanced written permission is granted by the author.
Final self-directed research project completed in fulfilment of the requirements for the Master of Architecture degree at McGill University.
Summary:
A multiplex is a low-rise multifamily residential building with two or more separately accessed dwelling units, built at a similar scale to a traditional house. To address severe housing shortages, many jurisdictions across North America and around the globe are reforming long-standing zoning laws to permit multiplex construction across vast areas of land which formerly only permitted building single-family houses. This opens up a new frontier of design possibilities for builders: how should these buildings be designed? Though well established across the province of Quebec and once historically common in many other places, multiplexes are rare in the rest of postwar North America, with the majority of private households now dwelling in single-family detached houses. The scale of the housing crisis demands a radical expansion of denser building stock, but the carbon intensity of large-scale new construction poses environmental problems.
As an example of ‘missing middle’ housing, multiplexes have many advantages which make them opportune for addressing both the housing and climate crises simultaneously. While increasing density and housing options, plexes have the advantage of being small enough to construct in light wood frame, embodying low carbon and employing local materials and trades. Their human scale and adaptability can allow them to blend unobtrusively within the built character of many established suburban neighborhoods. Their low capital requirements would permit a competitive market to emerge among small builders, while their rapid constructability lends itself well to prefabrication and other efficient construction techniques. This project revisits historical North American multiplex designs, makes the argument for streamlining multiplex construction in contemporary infill suburban contexts, investigates their regulatory and practical constraints, and explores ways of designing the typology in order to improve its environmental performance, cost effectiveness, and above all the quality of life for residents.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Figure 20. CMHC House Design Catalogues
pages. Key among these were to use low-rise light
wood frame assemblies to keep their construction
relatively simple, low-carbon and low-cost with
potential for prefab manufacturing.
This idea for preparing a ‘catalogue’ of standardized
(yet adaptable) designs was inspired by historic
catalogues that the Canadian government issued in
the postwar decades. The CMHC hired architects
to design catalogues of house plans, which were
then distributed to private builders. Though mostly
single family houses, at least one catalogue was
made for duplexes, though it was mainly marketed
in Quebec.
The predesigned catalogue represents a decentralized,
‘all hands on deck’ model for mass homebuilding.
By standardizing designs, professional expertise
is enlisted upfront to pre-empt excess costs that
can be incurred by unsophisticated bespoke
construction, as well as establishing a high baseline
level of building performance. However, by being
prescriptive rather than binding, they allow private
builders the freedom to adapt them as they see
fit to meet their desires, market demand and site
specific conditions.
49
Change language