The New Plex
© Philippe Fournier 2023. All rights reserved. Reproduction prohibited unless advanced written permission is granted by the author. Final self-directed research project completed in fulfilment of the requirements for the Master of Architecture degree at McGill University. Summary: A multiplex is a low-rise multifamily residential building with two or more separately accessed dwelling units, built at a similar scale to a traditional house. To address severe housing shortages, many jurisdictions across North America and around the globe are reforming long-standing zoning laws to permit multiplex construction across vast areas of land which formerly only permitted building single-family houses. This opens up a new frontier of design possibilities for builders: how should these buildings be designed? Though well established across the province of Quebec and once historically common in many other places, multiplexes are rare in the rest of postwar North America, with the majority of private households now dwelling in single-family detached houses. The scale of the housing crisis demands a radical expansion of denser building stock, but the carbon intensity of large-scale new construction poses environmental problems. As an example of ‘missing middle’ housing, multiplexes have many advantages which make them opportune for addressing both the housing and climate crises simultaneously. While increasing density and housing options, plexes have the advantage of being small enough to construct in light wood frame, embodying low carbon and employing local materials and trades. Their human scale and adaptability can allow them to blend unobtrusively within the built character of many established suburban neighborhoods. Their low capital requirements would permit a competitive market to emerge among small builders, while their rapid constructability lends itself well to prefabrication and other efficient construction techniques. This project revisits historical North American multiplex designs, makes the argument for streamlining multiplex construction in contemporary infill suburban contexts, investigates their regulatory and practical constraints, and explores ways of designing the typology in order to improve its environmental performance, cost effectiveness, and above all the quality of life for residents.
© Philippe Fournier 2023. All rights reserved.
Reproduction prohibited unless advanced written permission is granted by the author.
Final self-directed research project completed in fulfilment of the requirements for the Master of Architecture degree at McGill University.
Summary:
A multiplex is a low-rise multifamily residential building with two or more separately accessed dwelling units, built at a similar scale to a traditional house. To address severe housing shortages, many jurisdictions across North America and around the globe are reforming long-standing zoning laws to permit multiplex construction across vast areas of land which formerly only permitted building single-family houses. This opens up a new frontier of design possibilities for builders: how should these buildings be designed? Though well established across the province of Quebec and once historically common in many other places, multiplexes are rare in the rest of postwar North America, with the majority of private households now dwelling in single-family detached houses. The scale of the housing crisis demands a radical expansion of denser building stock, but the carbon intensity of large-scale new construction poses environmental problems.
As an example of ‘missing middle’ housing, multiplexes have many advantages which make them opportune for addressing both the housing and climate crises simultaneously. While increasing density and housing options, plexes have the advantage of being small enough to construct in light wood frame, embodying low carbon and employing local materials and trades. Their human scale and adaptability can allow them to blend unobtrusively within the built character of many established suburban neighborhoods. Their low capital requirements would permit a competitive market to emerge among small builders, while their rapid constructability lends itself well to prefabrication and other efficient construction techniques. This project revisits historical North American multiplex designs, makes the argument for streamlining multiplex construction in contemporary infill suburban contexts, investigates their regulatory and practical constraints, and explores ways of designing the typology in order to improve its environmental performance, cost effectiveness, and above all the quality of life for residents.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The New Plex
Sears Modern Homes ‘Atlanta’
Various Cities, USA
1921-1934
2 storeys, 4 units, 8 bedrooms
Lot Area:
Coverage:
FAR:
Storeys:
GFA:
GFA / Bedrooms:
Unit Access:
Construction / Materials:
Detached?
NBCC Division:
Means of Egress:
Bedroom Window Egress:
varies
varies
varies
2 + basement
331.6m 2 (3,569 ft 2 )
41.5m 2
Interior from common corridor
accessed from front door
Kit of parts: numbered precut
wood frame & components
mailed to site
Yes
Part 9, Division B
1 interior, 1 exterior
Side setbacks required for side
bedroom fenestration
The Atlanta was one of many designs included
in the Sears & Roebuck Company’s Modern
Homes catalogue, which from 1908 - 1934
offered predesigned kit-of-parts homes that
could be ordered in the mail, shipped to site
then erected by the owner. Most of the Modern
Homes catalogue were single family homes,
but the Atlanta was one of a few multifamily
home designs, with four 2-bedroom units total
in two storeys + a shared basement accessed
from the exterior rear for storage. All four units
can be accessed from a central single-run stair
corridor off of the main front door. A lightwell
is provided at the centre to allow natural light
to penetrate the interior as well as allow some
natural ventilation. Bedrooms are loaded at the
side, bathrooms are centred beside the light well,
kitchens are at the rear while an open plan living
and dining room opens to the front porch and
balconies. A common exterior porch structure
with stairs at the rear also provides egress.
32
Change language