The New Plex
© Philippe Fournier 2023. All rights reserved. Reproduction prohibited unless advanced written permission is granted by the author. Final self-directed research project completed in fulfilment of the requirements for the Master of Architecture degree at McGill University. Summary: A multiplex is a low-rise multifamily residential building with two or more separately accessed dwelling units, built at a similar scale to a traditional house. To address severe housing shortages, many jurisdictions across North America and around the globe are reforming long-standing zoning laws to permit multiplex construction across vast areas of land which formerly only permitted building single-family houses. This opens up a new frontier of design possibilities for builders: how should these buildings be designed? Though well established across the province of Quebec and once historically common in many other places, multiplexes are rare in the rest of postwar North America, with the majority of private households now dwelling in single-family detached houses. The scale of the housing crisis demands a radical expansion of denser building stock, but the carbon intensity of large-scale new construction poses environmental problems. As an example of ‘missing middle’ housing, multiplexes have many advantages which make them opportune for addressing both the housing and climate crises simultaneously. While increasing density and housing options, plexes have the advantage of being small enough to construct in light wood frame, embodying low carbon and employing local materials and trades. Their human scale and adaptability can allow them to blend unobtrusively within the built character of many established suburban neighborhoods. Their low capital requirements would permit a competitive market to emerge among small builders, while their rapid constructability lends itself well to prefabrication and other efficient construction techniques. This project revisits historical North American multiplex designs, makes the argument for streamlining multiplex construction in contemporary infill suburban contexts, investigates their regulatory and practical constraints, and explores ways of designing the typology in order to improve its environmental performance, cost effectiveness, and above all the quality of life for residents.
© Philippe Fournier 2023. All rights reserved.
Reproduction prohibited unless advanced written permission is granted by the author.
Final self-directed research project completed in fulfilment of the requirements for the Master of Architecture degree at McGill University.
Summary:
A multiplex is a low-rise multifamily residential building with two or more separately accessed dwelling units, built at a similar scale to a traditional house. To address severe housing shortages, many jurisdictions across North America and around the globe are reforming long-standing zoning laws to permit multiplex construction across vast areas of land which formerly only permitted building single-family houses. This opens up a new frontier of design possibilities for builders: how should these buildings be designed? Though well established across the province of Quebec and once historically common in many other places, multiplexes are rare in the rest of postwar North America, with the majority of private households now dwelling in single-family detached houses. The scale of the housing crisis demands a radical expansion of denser building stock, but the carbon intensity of large-scale new construction poses environmental problems.
As an example of ‘missing middle’ housing, multiplexes have many advantages which make them opportune for addressing both the housing and climate crises simultaneously. While increasing density and housing options, plexes have the advantage of being small enough to construct in light wood frame, embodying low carbon and employing local materials and trades. Their human scale and adaptability can allow them to blend unobtrusively within the built character of many established suburban neighborhoods. Their low capital requirements would permit a competitive market to emerge among small builders, while their rapid constructability lends itself well to prefabrication and other efficient construction techniques. This project revisits historical North American multiplex designs, makes the argument for streamlining multiplex construction in contemporary infill suburban contexts, investigates their regulatory and practical constraints, and explores ways of designing the typology in order to improve its environmental performance, cost effectiveness, and above all the quality of life for residents.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The Housing Crisis
Figure 6. The ‘Greenbelt’ around Greater Toronto-Hamilton. Buildings shown in black
exclusively for single family homes, most cities
in North America practice ‘Euclidian’ zoning,
enforcing a strict separation between residential
land use from commercial and other uses. In
Toronto designated mixed-use lands -- which also
permit relatively unrestricted densities -- constitute
a small minority of overall land and are relegated
mostly in the downtown core or major arterial
roads, where land is already intrinsically expensive.
It is also coloured ‘red’ on the city’s official zoning
maps. For many cities, further outward expansion
through suburban sprawl is not a viable option.
Aside from being environmentally destructive, many
cities have either natural geographic boundaries
(such as the mountains, ocean and American border
in Vancouver) or legally imposed urban growth
boundaries like Ontario’s greenbelts around Ottawa
and the Greater Toronto-Niagara region. The merits
of such policies can be debated, but the important
point is that they restrict the supply of developable
land near major urban centres, which is already
limited. With no room to grow out, cities must grow
up to provide more housing supply.
19
Change language