VMware Certification 5V0-31.22 Exam Dumps

Dumpsinfo is a good website providing the latest exams information and dumps
questions for all hot IT certification exams, such as Microsoft, Cisco, Huawei,
IBM, VMware, Fortinet, and so on.
Features of Dumpsinfo’s products
Instant Download
Free Update in 3 Months
Money back guarantee
PDF and Software
24/7 Customer Support
Besides, Dumpsinfo also provides unlimited access. You can get all Dumpsinfo
files at lowest price.
VMware Cloud Foundation Specialist (v2) 5V0-31.22 exam free dumps questions
are available below for you to study.
Full version: 5V0-31.22 Exam Dumps Questions
1. The administrator downloads the bundles from vSphere Lifecycle Manager
C. 1. vSphere Lifecycle Manager checks depot vmware.com
2.A systems administrator is tasked to deploy VMware Cloud Foundation (VCF) and has already
deployed the VMware Cloud Builder appliance.
What is the next step the systems administrator should take?
A. Deploy the Management Domain using VMware Cloud Builder.
B. Prepare and configure the ESXi hosts to be used in the deployment.
C. Configure the Management Domain using custom certificates.
D. Upload the Deployment Parameter Workbook.
Answer: D
Explanation:
after deploying the VMware Cloud Builder appliance, the next step a systems administrator should
take when deploying VMware Cloud Foundation (VCF) is Option D: Upload the Deployment

Parameter Workbook 1. After uploading and validating the deployment parameter workbook, you can
perform bring-up of the management domain 1. According to the VMware Cloud Foundation
documentation, after deploying the VMware Cloud Builder appliance, the next step is to create a
deployment parameter workbook that defines the parameters required for the deployment. This
workbook can be created manually or generated using the VMware Cloud Foundation Deployment
Parameter Workbook Generator tool. Oncethe workbook is created, it must be uploaded to the
VMware Cloud Builder appliance before deploying the Management Domain [1].
Therefore, the correct sequence of steps would be:
✑ Deploy the VMware Cloud Builder appliance
✑ Create or generate the Deployment Parameter Workbook
✑ Upload the Deployment Parameter Workbook to the VMware Cloud Builder appliance
✑ Deploy the Management Domain using VMware Cloud Builder.
Reference: [1] VMware Cloud Foundation Planning and Preparation Guide - https://docs.vmware.com
/en/VMware-Cloud-Foundation/4.3/vcf-planning-preparation/GUID-DE823E7F-8682-4BFA-
A293-91EFC48E3CAB.html
3.A systems administrator is implementing stretched clusters in an environment with multiple
Availability Zones (AZs).
Which statement accurately describes this design?
A. For VLANs that are stretched between AZs, configure load balancing in the Layer 3 gateway
between AZs
B. Layer 3 networks must be stretched between the AZs by the physical infrastructure
C. The Layer 3 gateway for the workload domain and Edge overlay networks must be
highly available across the AZs.
D. If VLAN is stretched between AZ1 and AZ2, the Layer 3 network must also be stretched between
the two AZs.
Answer: A
Explanation:
This is because according to VMware documentation, this is one of the design considerations for
implementing stretched clusters in an environment with multiple Availability Zones (AZs). Load
balancing in the Layer 3 gateway between AZs can improve network performance and availability by
distributing traffic across multiple paths.
4.An architect is presented with a Bill of Material for different vSAN ready nodes:
• 8 identical nodes with 1 vSAN disk group
• 8 identical nodes with 2 vSAN disk groups
What is the ideal design of VMware Cloud Foundation domains that the architect should recommend?
A. 1 Management Domain of 4 nodes, 1 Workload Domain of 4 nodes, and 1 Workload Domain of 8
nodes
B. 1 Domain of 16 nodes deployed on a Consolidated Architecture model
C. 1 Management Domain of 6 Nodes, 1 Workload Domain of 4 nodes, and 1 Workload Domain of 6
nodes
D. 1 Management Domain of 6 nodes and 1 Workload Domain of 10 nodes
Answer: A
Explanation:
This is because according to VMware documentation, this is the ideal design of VMware Cloud
Foundation domains that the architect should recommend based on the Bill of Material for different
vSAN ready nodes. This design can provide optimal performance and availability by using vSAN
ready nodes with different disk group configurations for different domains based on their workload
characteristics and requirements. The management domain can use vSAN ready nodes with one disk

group per node to provide sufficient capacity and redundancy for management components such as
vCenter Server and NSX Manager. The workload domains can use vSAN ready nodes with two disk
groups per node to provide higher performance and throughput for VI workloads such as VMs and
containers.
5.A VMware Cloud Foundation administrator has been tasked with replacing self-signed certificates
with those signed by a third-party Certificate Authority. A security policy disallows the integration and
use of Microsoft Active Directory Certificate Sen/ices and prefers an external provider.
Which two steps must be taken in order to configure these certificates? (Choose two.)
A. Generate Certificate Signing Requests from SDDC Manager.
B. Ensure that the external provider has Administrator rights in vCenter.
C. Create and package the certificates in a domain_name.tar.gz file
D. Use the sddcmanager-ssl-util.sh utility to list and delete existing certificates.
E. Generate public-private key pairs using the external provider.
Answer: A,C
Explanation:
A. Generate Certificate Signing Requests from SDDC Manager - In order to replace the self-signed
certificates with third-party signed certificates, the Certificate Signing Requests (CSRs) need to be
generated. This can be done from the SDDC Manager UI.
C. Create and package the certificates in a domain_name.tar.gz file - After the CSRs are generated,
they can be used to obtain third-party signed certificates from a certificate authority. Once the
certificates are obtained, they need to be packaged in a domain_name.tar.gz file and uploaded to
SDDC Manager.
✑ Generate Certificate Signing Requests (CSRs) from SDDC Manager for each component that
requires a certificate1. You can do this from the SDDC Manager UI or using an API call1.
✑ Have the CSRs signed by a third-party Certificate Authority of your choice1. You can use any
external provider that meets your security policy requirements.
✑ Create and package the certificates in a domain_name.tar.gz file according to the naming
convention and folder structure specified by SDDC Manager1. You can use any compression tool that
supports gzip format.
✑ Upload and install the certificates using SDDC Manager UI or API1. You can also verify and
troubleshoot the certificate installation using SDDC Manager.
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcfadmin/GUID-80431626-B9CD-4F21-B681-A8F5024D2375.html
6.A VCF administrator is preparing to configure scheduled backups for the SDDC Manager.
What must the administrator register as an external component to complete this task?
A. NFS server
B. SFTP server
C. iSCSI server
D. SMB server
Answer: B
Explanation:
This is because according to VMware documentation, this is what an administrator must register as
an external component to complete this task of configuring scheduled backups for the SDDC
Manager. SFTP server is one of the supported backup targets for SDDC Manager backups. The
administrator can register an SFTP server by navigating to the SDDC Manager UI > Administration >
Backup > Site Settings and clicking Register External.

7.A systems administrator is tasked with creating a new VI workload domain that will leverage either
an external NFS or a VMFS on FC storage as the principal storage.
Which action is required to fulfill this requirement?
A. Create a new network pool for vMotion and vSAN networks.
B. Create a new network pool only for vMotion network.
C. Create a new network pool for vMotion, vSAN, and NFS networks.
D. Create a new network pool for vMotion and NFS networks.
Answer: D
Explanation:
This is because a network pool is a collection of subnets within an layer-2
network domain that includes information about subnets reserved for the vMotion and NFS
networks that are required for adding a host to the SDDC Manager inventory2. The other
options are not correct because they either include vSAN network, which is not needed for
external NFS or VMFS on FC storage2, or they do not include NFS network, which is
needed for external NFS storage1.
https://infohub.delltechnologies.com/l/dell-storage-with-vmware-cloud-foundation-
1/vmware-cloud-foundation-network-pool-configuration
8.An administrator successfully finished restoring a SDDC Manager and now needs to verify its
operation.
Which tool should the administrator use for this verification?
A. vRealize Operation plugin tool forVCF
B. Support and Serviceability (SoS) tool
C. SDDC Manager GUI restore health tool
D. Ruby vSphere Console VCF check tool
Answer: B
Explanation:
This is because according to VMware documentation5, this is the tool that an administrator should
use for verifying the operation of SDDC Manager after restoring it from a file-based backup. The SoS
tool can run various tests and checks on SDDC Manager and its components to ensure their health
and functionality.
9.An architect is designing overlay networking and routing for two VMware Cloud Foundation VI
workload domains.
The following requirements must be met in the design:
• NSX-T Bare Metal Edge nodes are required to satisfy a requirement for extremely low latency.
• The costs must be kept to a minimum.
Which design meets these customer requirements?
A. Create separate NSX-T Manager clusters for each workload domain, and then create a single NSX-
T Bare Metal Edge cluster to be shared between NSX-T Manager clusters.
B. Place the Bare Metal Edge nodes in the same rack as the management domain hosts, and then
add the NSX-T Bare Metal Edge cluster to the management domain NSX-T Manager cluster.
C. Share an NSX-T Manager cluster between both workload domains, and then add the NSX-T Bare
Metal Edge cluster to the shared NSX-T Manager cluster.
D. Create separate NSX-T Manager clusters for each workload domain, and then create separate
NSX-T Bare Metal Edge clusters for each workload domain.
Answer: C
Explanation:
This is because according to VMware documentation, this is one of the supported design options for
deploying NSX-T Bare Metal Edge nodes for VMware Cloud Foundation VI workload domains.

Sharing an NSX-T Manager cluster between both workload domains can reduce costs by minimizing
the number of NSX-T licenses required. Adding the NSX-T Bare Metal Edge cluster to the shared
NSX-T Manager cluster can satisfy a requirement for extremely low latency by providing direct access
to physical network interfaces.
10. Go to Administration > Security > Password Management.
11.Which license is required to enable Workload Management on VMware Cloud Foundation?
A. VMware vSphere Evaluation
B. VMware vSphere Standard
C. VMware vSphere Enterprise Plus
D. VMware Tanzu Basic
Answer: D
Explanation:
A Tanzu Basic license is required to enable Workload Management on VMware Cloud Foundation.
Once enabled, the Supervisor Cluster must be assigned a Tanzu license before the 60-day evaluation
period expires. This license can be added to the license inventory of vSphere if a valid Tanzu Edition
license is available.
Reference: VMware Cloud Foundation Specialist (v2) Exam Guide, Section 3: VMware vSphere with
Tanzu, VMware Documentation: VMware Tanzu Kubernetes Grid Documentation A Tanzu Basic
license is required to enable Workload Management on VMware Cloud Foundation. Once enabled,
the Supervisor Cluster must be assigned a Tanzu license before the 60-day evaluation period
expires. This license can be added to the license inventory of vSphere if a valid Tanzu Edition license
is available.
Reference: VMware Cloud Foundation Specialist (v2) Exam Guide, Section 3: VMware vSphere with
Tanzu, VMware Documentation: VMware Tanzu Kubernetes Grid Documentation
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.2/com.vmware.vcf.vxrail.admin.doc/GUID-
E8D0A432-8573-4DF5-9330-A4FE15F74128.html
12.An administrator needs additional capacity on a vSAN cluster. Each host currently has only one
disk group.
Which two approaches can be used to expand storage capacity in this situation? (Choose two.)
A. Increase the number of cache disks in the existing disk group.
B. Add an additional disk group.
C. Disable compression.
D. Increase the number of capacity disks in the existing disk group
E. Disable deduplication.
Answer: B,D
Explanation:
To expand storage capacity in a vSAN cluster with one disk group, you can either add more drives to
hosts in the cluster, which is commonly referred to as scaling up, or add capacity drives to existing
disk groups
Option B: Add an additional disk group - According to search result [1], adding additional drives to a
host will increase both capacity and performance[1], and each disk group contains one flash cache
device and one or multiple capacity devices for persistent storage[2]. Therefore, adding an additional
disk group to each host would increase the storage capacity of the vSAN cluster.
Option D: Increase the number of capacity disks in the existing disk group - Search result [1] explains
that vSAN clusters require capacity and cache devices to function, and each
disk group can contain multiple capacity devices for persistent storage[2]. Thus, an additional way to
expand storage capacity in the vSAN cluster would be to increase the number of capacity disks in the

existing disk group.
Reference: 1: VMware vSAN documentation 2: VMware vSAN documentation
A disk group is a collection of one or more flash-based cache devices and one or more capacity
devices that provide storage capacity for a vSAN cluster. A vSAN cluster can have multiple disk
groups, and each disk group can have a different configuration.
To expand storage capacity in a vSAN cluster where each host currently has only one disk group, the
administrator can add an additional disk group or increase the number of capacity disks in the existing
disk group.
Adding an additional disk group involves adding more disks to the host and creating a new disk
group. This approach can provide additional capacity and performance benefits, as the new disk
group can be configured with different settings to optimize performance and capacity.
Increasing the number of capacity disks in the existing disk group involves adding more capacity
devices to the existing disk group. This approach can provide additional capacity, but may not
necessarily provide performance benefits as the existing disk group may already be fully utilized.
References:
VMware vSAN 7.0 Design and Sizing Guide:https://storagehub.vmware.com/t/vmware-vsan/vmwarevsan-7-0-design-and-sizing-guide-2/
VMware vSAN Documentation:https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphe
re.vsan-planning.doc/GUID-9B7C9685-64C5-49C2-8E3C-CC2E47AFBC6F.html
13.Which two roles are played by a Spherelet in a Tanzu-enabled VCF workload domain? (Choose
two.)
A. It runs as a VIB on all Supervisor Cluster ESXi hosts configured with the vSphere Networking
Stack.
B. It enables an ESXi hypervisor to act as a Kubernetes master node.
C. It enables an ESXi hypervisor to act as a Kubernetes worker node.
D. It starts and monitors vSphere pods running on the workload domain cluster
E. It communicates with the vSphere with Tanzu embedded Harbor registry.
Answer: B,C
Explanation:
According to vSphere with Tanzu Architecture1, a Spherelet is a component that runs as a VIB on all
Supervisor Cluster ESXi hosts configured with the vSphere Networking Stack. It enables an ESXi
hypervisor to act as a Kubernetes master node or a Kubernetes worker node, depending on the role
assigned by the Supervisor Cluster control plane.
14.The architect of a multi-site VMware Cloud Foundation solution is tasked with ensuring that the
prerequisites for vSAN data at rest encryption have been achieved. The existing design calls for use
of the vSphere Native Key Provider. NSX-T is configured with Federation, and both sites benefit from
a stretched TO and T1 network topology.
A new security policy requires the use of vSphere Virtual Machine encryption, in addition to
the at-rest encryption already configured. During a failover test from Site-A to Site-B using Site
Recovery Manager, the virtual machines were unable to power-on.
How does the design need to be changed to support the new requirement?
A. Use a third-party KMS solution that allows for key replication.
B. Use a third-party KMS solution at each site.
C. Ensure that a TPM 2.0 certified module is installed on all ESXi hosts at Site-B.
D. Ensure that the Site Recovery Manager service account has Cryptographer ReadKeyServerslnfo
privileges.
Answer: A
Explanation:

This is because according to VMware documentation1, vSphere Native Key Provider (NKP) is a
simple key management solution that does not support key replication across sites or clusters. It also
does not support vSphere Virtual Machine encryption which requires a third-party KMS solution2.
Therefore, to enable both vSAN data at rest encryption and vSphere Virtual Machine encryption in a
multi-site VCF solution, you need to use a third-party KMS solution that allows for key replication
across sites.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.security.doc/GUID-54B9FBA
2-FDB1-400B-A6AE-81BF3AC9DF97.html
15. Reassign the vSAN license to the cluster in the vCenter Server.
16.Which two steps must be performed to create a vSphere with Tanzu namespace? (Choose two.)
A. Deploy a vSphere Cluster
B. Define resource limits
C. Enable Harbor Image Registry
D. Assign permissions
E. Use a DNS-compliant name
Answer: B,E
Explanation:
According to How to Create a vSphere with Tanzu Namespace1 and Create and Configure a vSphere
Namespace2, two of the steps required to create a vSphere with Tanzu namespace are:
✑ Define resource limits: You can specify CPU, memory, and storage limits for each namespace to
control how much resources are available for the workloads running in that namespace.
✑ Use a DNS-compliant name: You must provide a unique name for each namespace that is
compliant with DNS naming conventions.
17.An administrator is tasked with changing the password of the SDDC Manager super user account
in a newly installed VCF environment.
Which method must the administrator use to complete this task?
A. 1. Log in to SDDC manager Ul as a user with the ADMIN role.