Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Step 18<br />
A31hw<br />
(8)<br />
1 From inside the building, put the<br />
bottom of the right door assembly (on<br />
your left when you are inside the<br />
building) behind door jamb into the<br />
front frame track.<br />
2 Position the top of the door so that<br />
the holes in the door line up with the<br />
holes in the door slides.<br />
3 Fasten the door to the door slides<br />
using two #10Bx1/2" (13 mm) screws<br />
per door slide.<br />
NOTE<br />
The holes in the door slides allow<br />
you to adjust the doors. Place the<br />
door in the middle holes.<br />
4 Repeat steps 1 through 3 for the<br />
left door.<br />
● Parts Needed For ●<br />
Door Installation & Adjustment<br />
Gable<br />
Door Track<br />
Door Slide<br />
Adjustment Holes Allow<br />
Doors to Meet Evenly<br />
Along Their Length<br />
Horizontal Door Brace<br />
Front Floor Frame Assembly<br />
Adjustment Holes<br />
STEP<br />
1<br />
● Right Door Assembly (1)<br />
● Left Door Assembly (1)<br />
Door Slide<br />
Right Door Left Door<br />
#10Bx1/2" (13 mm)<br />
Screw<br />
STEP<br />
Keep this <strong>Owner's</strong> <strong>Manual</strong> and Assembly Instructions for future reference.<br />
Door<br />
STEP<br />
2<br />
3<br />
STEP<br />
4<br />
31
Change language