TALEXXengine STARK SLE GEN2 SELECT

5 35 

19 23 

1500 lm tc 2500 lm 

Ø3.2 

50 50 

50 

tc 

Technical Design-in Guide 

tc 

50 

20,15 20,15 20,15 

6.5 

1500 lm tc 2500 lm 

Tengine STARK SLE GEN2 

Ø3.2 

19

&nbsp Table of Contents 

Table of contents 

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

Complete system solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

Creative freedom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

Perfect white light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

Excellent economy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

Summary of the chapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

Mechanical aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

Electrical aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

Optical aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

Thermal aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

Ordering information and sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

One system - three versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

Type codes and versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 

Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

Standards and directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 

Mechanical aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 

Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 

Electrical aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 

Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 

Connections on the converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 

Wiring diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 

Optical aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 

Colour spectrum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 

Coordinates and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 

Reflector design and beam characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 

Thermal aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 

Module cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 

Passive and active cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 

Fan connection and temperature measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 

Ordering information and sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 

Article numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 

Product applications and partners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 

Tridonic sales organisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 

Additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 

Technical Design-in Guide TALEXXengine STARK SLE GEN2 | 12-2012 | en - 3 / 68 -

&nbsp Introduction 

Description 

A new era has dawned with TALEXX LEDs. Now, high-quality light and optimum efficiency are no longer 

mutually exclusive. The versatile system solutions from Tridonic provide the basis for lighting designs that 

are futureproof, economical and eco-friendly in a wide range of applications. LEDs are showing their 

strengths in retail outlets, offices, hotels, restaurants and museums. 

If you are designing a luminaire to work with LEDs there are certain differences compared to designs with 

conventional light sources that you need to be aware of. We have written this design guide to help you 

understand these differences. It answers all the most important questions you may have, such as the 

right mechanical design, thermal management and optical conditions. 

Complete system solution 

LEDs offer major benefits for general illumination tasks - they are versatile, highly energy-efficient and 

virtually maintenance-free. With TALEXXengine STARK SLE GEN2 you get a complete system solution 

for downlights from a single source, consisting of three perfectly matched components: LED module, LED 

converter and ready-made cables for connecting the module and the converter. 

TALEXXengine STARK SLE GEN2 offers impressive benefits: 

High system efficiency of up to 115 lm/W at tp=65°C 

High module efficiency of up to 145 lm/W 

Excellent colour rendering (CRI > 90) 

Standardised lumen packages for precise lighting planning 

Integrated interfaces such as DALI 

High reproducible colour quality 

High life time 50,000 hours at L80 (tc=65°C) 

Compliance with the mechanical and electrical standards of the luminaire industry 

Please note: 

All information in this guide has been produced with the utmost care. 

However, the guide is subject to change without notice. Errors and omission excepted. 

Tridonic does not accept liability for possible damage resulting from the use of this guide. 

The latest version of this guide can be found at led.tridonic.com or from your sales 

partner. 

Creative freedom 

With one product you can cover a very wide range of lighting tasks that up to now would have been 

impossible because of the dimensions or thermal management of traditional light sources. The broad 

TALEXXengine STARK SLE GEN2 portfolio offers the right solution for any application. You can find the 

right functionality to meet any requirements - from the non-dimmable basic version in different white 

tones to fully controllable and dimmable white light. In addition, there are special light colours available, 

for example for presenting fresh produce, meat and bread, and specific colours from the RGB spectrum. 


&nbsp Introduction 

Perfect white light 

A uniform crystal clear colour impression is very important particularly for wide-area lighting. TALEXX 

LEDs with their exceptional white light quality, their high luminous efficacy and their balanced distribution 

of light give luminaire designers a completely new tool. They provide instant light, free of ultra-violet or 

infra-red radiation, and constant colour. 

Excellent economy 

Compared with a lighting installation equipped with conventional light sources, TALEXX LEDs reduce 

energy consumption by up to 40 percent, and their long life significantly reduces maintenance and repair 

costs. 

Discover the new world of light with TALEXX LEDs. 

... 


&nbsp Summary of the chapters 

Summary of the chapters 

To make it easier to find your way around the Design-in Guide we have grouped the information on the 

TALEXXengine STARK SLE GEN2 systems into chapters. 

The guide begins with a system overview in which the different versions of the system are presented. 

The mechanical, electronic, optical and thermal aspects of the components are then described. At the 

end of the Design-in Guide you will find ordering information and sources. 

System overview 

The TALEXXengine STARK SLE GEN2 system is available in different versions, namely SELECT, 

CLASSIC and Food Colour with different properties and functions. The relevant components can be 

clearly assigned by their type codes. 

Mechanical aspects 

Depending on the particular situation, the converters can be installed in the luminaire casing (in-built) or 

outside the casing (remote). Dimensional drawings and installation instructions will help you take account 

of the requirements of the particular situation. 

Electrical aspects 

Standard cables can be used for the connection between the modules and the converter. 

All the connection options, the connections between the converter and the power supply and the 

connections of the control lines are shown in relevant wiring diagrams. 

Optical aspects 

The overall efficiency of the system is improved by choosing a reflector with suitable optical properties 

(e.g. beam angle) and dimensions. 

This chapter provides information to support customer-specific reflector design. 

Thermal aspects 

The system modules have been designed to operate with a passive or active heat sink and can be 

mounted directly on such a suitable heat sink. 

In the case of active cooling the fan can be connected directly to the module or converter depending on 

the version. 


&nbsp System Overview 

Ordering information and sources 

The ordering information for the components and the sources for heat sinks, reflectors and accessories 

can be found at the end of the document. 

System overview 

One system - three versions 

The TALEXXengine STARK SLE system is available in three different versions: 

Properties and functions STARK SLE GEN2 

Food Colour GOLD 

STARK SLE GEN2 

SELECT 

STARK SLE GEN2 

CLASSIC 

Colour temperature 2,700 K 4,000 K, 3,000 K 5,000 K, 4,000 K, 

3,000 K 

Luminous flux at tp=65°C 1,400 lm bis 2,700 lm 1,050 lm to 3,250 lm 1,250 lm to 5,550 lm 

Colour rendering / 

colour tolerance 

System efficiency at 

tp=65°C 

CRI > 90 / MacAdam 3 

SDC 

DALI Device Type 6 

for converters with 

dimming function 

switchDIM for converters with 


up to CRI > 90 / 

MacAdam 3 SDCM 

CRI > 80 / MacAdam 

3 SDCM 

up to 77 lm/W up to 90 lm/W up to 115 lm/W 

Device Type 6 





Device Type 6 





Module efficiency 95 lm/W up to 115 lm/W up to 145 lm/W 

Components 

A uniform naming concept has been adopted for the components. The TALEXXengine STARK SLE 

GEN2 system (spotlight LED Engine) comprises the following components: 

TALEXXmodule STARK SLE GEN2 SELECT, TALEXXmodule STARK SLE GEN2 CLASSIC and 

TALEXXmodule STARK SLE GEN2 Food colour GOLD: The modules (light sources) differ 

according to the version. 

TALEXXconverter Suitable LED converters with various functions are available for operating the 

modules. 



Notice 

To ensure efficient and reliable operation, the modules should only ever be used with 

Tridonic converters. 

Efficiency of the modules 

The high efficiency of TALEXXmodule STARK SLE GEN2 results not only in energy savings but also to a 

reduction in the thermal load. This means that smaller heat sinks can be used and more compact 

luminaires can be designed. 

Area of application 

All the components of the TALEXXengine STARK SLE GEN2 system comply with the protection 

requirements of IP20. The system is therefore suitable for indoor applications. 

TALEXXengine STARK SLE GEN2 complies with system protection class II. 

The TALEXXmodule STARK SLE GEN2 modules meet the requirements of protection class III. 

Type codes and versions 

Type code for modules 

The following type code is used to identify the modules: 

Type code for modules for SLE G2 LES 19 930 SEL for example 

Reference STARK - SLE 

GEN2 

- LES 

19 

Meaning Produkt Form Size CRI 

> 90 

Type code for converters 

The following type code is used to identify the converters: 

- 9 30 - SEL 

Colour 

temperature 

3,000 K 

Technical Design-in Guide TALEXXengine STARK SLE GEN2 | 12-2012 | en - 8 / 68 - 

Version


Type code for converters for LCI 050/1050 ... or example 

Reference LCI 050 / 1050 

Meaning LED converter, 

constant current 

... 

Power in W Current in mA 



Versions 

TALEXXengine STARK SLE GEN2 CLASSIC 

The TALEXXengine STARK SLE GEN2 CLASSIC system is an attractive entry-level solution for general 

illumination with LEDs. TALEXXconverters with or without a dimming function are available depending on 

the application. 

Charakteristics: 

Colour temperature of 3,000 K, 4,000 K or 5,000 K 

Colour rendering index CRI > 90 

Lumen values: 1,300 lm to 5,300 lm 

Small MacAdam 3 SDCM colour tolerance 

System efficiency of up to 115 lm/W at tp=65°C with high energy savings 

Option for operating a 12 V active cooling system 

Temperature monitoring in conjunction with dimmable converters 

High module efficiency of up to 145 lm/W 

Control functions: 

On/off via mains with converter without dimming function 

DALI, with converter with dimming function 

The TALEXXengine STARK SLE GEN2 CLASSIC version can be combined as follows: 



Converter matrix SLE GEN2 LES19 CLASSIC 

TALEXXconverter without dimming function 

Converter for an operating mode of 350 mA 

TALEXXmodule Luminous flux at 

tp=25°C 

STARK SLE G2 LES19 

830 CLA 


840 CLA 


750 CLA 



tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 

In-built Remote 

1,450 lm 3,000 K LCCI 016/0350 

Q010 

LCI 015/0350 

E020 

1,600 lm 4,000 K LCCI 016/0350 

Q010 

LCI 015/0350 

E020 

1,750 lm 5,000 K LCCI 016/0350 

Q010 

LCI 015/0350 

E020 

Colour 

temperature 

LCCI 

016/0350 

B020 

LCI 015/0350 

M020 

LCCI 

016/0350 

B020 

LCI 015/0350 

M020 

LCCI 

016/0350 

B020 

LCI 015/0350 

M020 


2,700 lm 3,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

3,000 lm 4,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

3,250 lm 5,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 030/0700 

M120 

LCI 033/0700 

U010 



TALEXXconverter with dimming function 



tp=25°C 


830 CLA 


840 CLA 


750 CLA 



tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 


1,450 lm 3,000 K LCAI 015/0350 

A020 

1,600 lm 4,000 K LCAI 015/0350 

A020 

1,750 lm 5,000 K LCAI 015/0350 

A020 

Colour 

temperature 


2,000 lm 3,000 K - LCAI 020/0500 

A120 

one4all 

2,250 lm 4,000 K - LCAI 020/0500 

A120 

one4all 

2,400 lm 5,000 K - LCAI 020/0500 

A120 

one4all 


- 

- 

-




tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 


2,700 lm 3,000 K LCAI 030/0700 

A120 

one4all 

3,000 lm 4,000 K LCAI 030/0700 

A120 

one4all 

3,250 lm 5,000 K LCAI 030/0700 

A120 

one4all 





tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 


2,850 lm 3,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

3,150 lm 4,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

3,400 lm 5,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 


- 

- 

- 

LCI 030/0700 

M120 

LCI 030/0700 

M120 

LCI 030/0700 

M120


Converter for an operating mode of 1,050 mA 


tp=25°C 


830 CLA 


840 CLA 


750 CLA 




tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 


4,050 lm 3,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

4,450 lm 4,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

4,850 lm 5,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

Colour 

temperature 


LCI 050/1050 

T020 

LCI 050/1050 

T020 

LCI 050/1050 

T020 

2,100 lm 3,000 K - LCAI 020/0500 

A120 

one4all 

2,300 lm 4,000 K - LCAI 020/0500 

A120 

one4all 

2,500 lm 5,000 K - LCAI 020/0500 

A120 

one4all 





tp=25°C 


830 CLA 


840 CLA 


750 CLA 



tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 


2,850 lm 3,000 K LCAI 030/0700 

A120 

one4all 

3,150 lm 4,000 K LCAI 030/0700 

A120 

one4all 

3,400 lm 5,000 K LCAI 030/0700 

A120 

one4all 

Colour 

temperature 


4,050 lm 3,000 K LCAI 0050/1050 

N020 

DALI 

4,450 lm 4,000 K LCAI 0050/1050 

N020 

DALI 

4,850 lm 5,000 K LCAI 0050/1050 

N020 

DALI 


- 

- 

- 

- 

- 

-






tp=25°C 


830 CLA 


840 CLA 


750 CLA 



tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 


2,950 lm 3,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

3,250 lm 4,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

3,500 lm 5,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

Colour 

temperature 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 030/0700 

M120 

LCI 033/0700 

U010 


4,200 lm 3,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

4,650 lm 4,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

5,050 lm 5,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

LCI 050/1050 

T020 

LCI 050/1050 

T020 

LCI 050/1050 

T020 





tp=25°C 


830 CLA 


840 CLA 


750 CLA 




tp=25°C 


830 CLA 


840 CLA 


750 CLA 

Colour 

temperature 


5,400 lm 3,000 K - LCI 055/1400 

R010 

5,950 lm 4,000 K - LCI 055/1400 

R010 

6,450 lm 5,000 K - LCI 055/1400 

R010 

Colour 

temperature 


2,950 lm 3,000 K - LCAI 020/0500 

A120 

one4all 

3,250 lm 4,000 K - LCAI 020/0500 

A120 

one4all 

3,500 lm 5,000 K - LCAI 020/0500 

A120 

one4all 





tp=25°C 


830 CLA 


840 CLA 


750 CLA 

... 

Colour 

temperature 


4,200 lm 3,000 K LCAI 030/0700 

A120 

one4all 

4,650 lm 4,000 K LCAI 030/0700 

A120 

one4all 

5,050 lm 5,000 K LCAI 030/0700 

A120 

one4all 


- 

- 

-


TALEXXengine STARK SLE GEN2 SELECT 

The TALEXXengine STARK SLE GEN2 SELECT system is impressive for its highquality light. 

TALEXXconverters with or without a dimming function are available depending on the application. 


Colour temperature of 3,000 K, 4,000 K 


Excellent quality of light 


Very small MacAdam 3 SDCM colour tolerance 

System efficiency of up to 90 lm/W with high energy savings at tp=65°C 






The TALEXXengine STARK SLE GEN2 SELECT version can be combined as follows: 

Converter matrix SLE GEN2 LES19 SELECT 




tp=25°C 


930 SEL 


940 SEL 

Colour 

temperature 


1,300 lm 3,000 K LCCI 016/0350 

Q010 

LCI 015/0350 

E020 

1,300 lm 4,000 K LCCI 016/0350 

Q010 

LCI 015/0350 

E020 

LCCI 

016/0350 

B020 

LCI 015/0350 

M020 

LCCI 

016/0350 

B020 

LCI 015/0350 

M020 






tp=25°C 


930 SEL 


940 SEL 



tp=25°C 


930 SEL 


940 SEL 

Colour 

temperature 


1,300 lm 3,000 K LCAI 015/0350 

A020 

1,300 lm 4,000 K LCAI 015/0350 

A020 

Colour 

temperature 


1,750 lm 3,000 K - LCAI 020/0500 

A120 

one4all 

1,750 lm 4,000 K - LCAI 020/0500 

A120 

one4all 

Converter matrix SLE GEN2 LES23 SELECT 




tp=25°C 


930 SEL 


940 SEL 

Colour 

temperature 


2,500 lm 3,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

2,600 lm 4,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 


- 

- 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 030/0700 

M120 

LCI 033/0700 

U010





tp=25°C 


930 SEL 


940 SEL 



tp=25°C 


930 SEL 


940 SEL 

Colour 

temperature 


1,800 lm 3,000 K - LCAI 020/0500 

A120 

one4all 

1,900 lm 4,000 K - LCAI 020/0500 

A120 

one4all 

Colour 

temperature 


2,500 lm 3,000 K LCAI 030/0700 

A120 

one4all 

2,600 lm 4,000 K LCAI 030/0700 

A120 

one4all 

Convertermatrix SLE GEN2 LES26 SELECT 




tp=25°C 


930 SEL 


940 SEL 

Colour 

temperature 


2,550 lm 3,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 

2,700 lm 4,000 K LCI 030/0700 

E020 

LCI 030/0700 

A120 


- 

- 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 030/0700 

M120 

LCI 033/0700 

U010




tp=25°C 


830 SEL 


840 SEL 




tp=25°C 


930 SEL 


940 SEL 



tp=25°C 


830 SEL 


840 SEL 

... 

Colour 

temperature 


3,700 lm 3,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

3,900 lm 4,000 K LCI 050/1050 

N020 

LCI 050/1050 

R010 

Colour 

temperature 

LCI 050/1050 

T020 

LCI 050/1050 

T020 


2,550 lm 3,000 K LCAI 030/0700 

A120 

one4all 

2,700 lm 4,000 K LCAI 030/0700 

A120 

one4all 

Colour 

temperature 


3,700 lm 3,000 K LCAI 0050/1050 

N020 

DALI 

3,900 lm 4,000 K LCAI 0050/1050 

N020 

DALI 


- 

- 

- 

-


TALEXXengine STARK SLE GEN2 Food Colour GOLD 

The TALEXXengine STARK SLE GEN2 Food Colour GOLD system is impressive for its high quality light. 

TALEXXconverters with or without a dimming function are available depending on the application. 


Colour temperature of 2,700 K 


Excellent quality of light 


Very small MacAdam 3 SDCM colour tolerance 

System efficiency of up to 77 lm/W with high energy savings at tp=65°C 






The TALEXXengine STARK SLE GEN2 Food Colour GOLD version can be combined as follows: 

Converter matrix SLE GEN2 Food Colour GOLD 




tp=25°C 


GOLD SEL 

Colour 

temperature 


1,600 lm 2,700 K - LCI 20W 500mA 

TEC SR 





tp=25°C 


GOLD SEL 


GOLD SEL 



tp=25°C 


GOLD SEL 




tp=25°C 


GOLD SEL 

Colour 

temperature 


2,150 lm 2,700 K - LCI 030/0700 

E020 

LCI 030/0700 

A120 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 35W 700mA 

TEC SR 

2,200 lm 2,700 K - LCI 030/0700 

E020 

LCI 030/0700 

A120 

LCI 030/0700 

M120 

LCI 033/0700 

U010 

LCI 35W 700mA 

TEC SR 

Colour 

temperature 


3,150 lm 2,700 K LCI 050/1050 

R010 

Colour 

temperature 


LCI 050/1050 

N020 

LCI 050/1050 

T020 

1,600 lm 2,700 K - LCAI 020/0500 

A120 one4all 





tp=25°C 


GOLD SEL 


GOLD SEL 



tp=25°C 


GOLD SEL 

... 

Colour 

temperature 


2,150 lm 2,700 K - LCAI 030/0700 

A120 one4all 

2,200 lm 2,700 K - LCAI 030/0700 

A120 one4all 

Colour 

temperature 


3,150 lm 2,700 K - LCAI 0050/1050 

N020 DALI 



Standards and directives 

Standards and directives for modules 

The following standards and directives were taken into consideration in designing and manufacturing the 

modules: 

CE 

2006/95/EG Low-voltage directive: Directive relating to electrical equipment for use 

within certain voltage limits 

2004/108/EG EMC* directive: Directive relating to electromagnetic compatibility 

RoHS 

2002/95/EC RoHS*-Directive: Directive on the restriction of the use of certain 

hazardous substances in electrical and electronic equipment 

* RoHS: Restriction of (the use of certain) hazardous substances 

Safety 

DIN IEC 62031:2008 Safety requirements for LED modules 

EN 60598-1:2008 und 

A11:2009 

EN 60598-2-2:1996 und 

A1:1997 

General requirements and tests for luminaires 

Luminaires - Part 2. Special requirements; 

Main section 2: Recessed luminaires 

EN 62471:2008 Photo-biological safety of lamps and lamp systems 



Safety and performance 

EN 61347-1:2009 General and safety requirements 

EN 61347-2-13:2007 Special requirements for dc and ac powered electronic operating 

equipment for LED modules 

EN 62384:2007 IEC 

62384 A1:2009 

Operational requirements 

Standards and directives for converters 

The following standards and directives were taken into consideration in designing and manufacturing the 

converters: 

EMI 

EN 55015 2008 Limit values measurement methods for radio interference properties of 

electrical lighting equipment and similar electrical devices 

EN 61000-3-2:2005 A1: 

2008 und A2:2009 

Limit values for harmonic currents (equipment input current < 16 A per 

conductor) 

EN 61000-3-3:2005 Limit values for voltage fluctuations and flicker in low-voltage systems for 

equipment with an input current < 16 A per conductor that are not 

subject to any special connection conditions 

EN 61547:2001 EMC* requirements 

EN 55015:2006 A1 2007 Limit values measurement methods for radio interference properties of 

electrical lighting equipment and similar electrical devices 

EN 61347-1:2008 General and safety requirements for equipment for lamps 

* EMC: Electromagnetic compatibility 

Safety 

EN 50172 2005 Safety lighting systems 



DALI 

IEC 62386-101:2009 General requirements, system 

IEC 62386-102:2009 General requirements, controller 

IEC 62386-207:2009 Special requirements, controller; LED modules 

... 


&nbsp Mechanical Aspects 

Mechanical aspects 

Installation 

Installation versions 

EOS/ESD safety guidelines 

The device/module contains components that are sensitive to electrostatic discharge and 

may only be installed in the factory and on site if appropriate EOS/ESD protection 

measures have been taken. No special measures need be taken for devices/modules 

with enclosed casings (contact with the pc board not possible), just normal installation 

practice. 

Please note the requirements set out in the document EOS/ESD guidelines 

(Guideline_EOS_ESD.pdf) at: 

www.tridonic.com/com/en/technical-docs.asp 

Depending on the particular situation, the converters can be installed in the luminaire casing (in-built) or 

outside the casing (remote). 

In-built version Remote version 



Integrated terminal for a 

time-saving assembly 

... 

Back of the module for thermal 

connection to the heat sink 

Version without housing for 

individual integration in the light 



Notes on installation 

Depending on the installation situation for the converter and the modules, the following requirements 

must be met: 

Adequate distance from insulating materials 

Adequate strain relief for closed covering on the converter 

Adequate cooling of the modules (the maximum temperature at the tc point must not be exceeded) 

Unrestricted exit of light from the modules 

Protection measures against damage 

Mechanical stress 

TALEXX modules contain electronic components that are sensitive to mechanical stress. Such stress 

should be kept to an absolute minimum. In particular the following mechanical stresses should be 

avoided as these may cause irreversible damage: 

Pressure 

Bending stress 

Drilling, 

Milling, 

Breaking, 

Sawing, 

and similar mechanical processing. 

Compressive stresses 

The components of the TALEXX modules (circuit boards, glob-top, lenses, electronic components etc.) 

are sensitive to compressive stresses. The components must not be exposed to compressive stresses. 

If glass or Plexiglas shields are used make sure that pressure is not exerted on the glob-top. 

Only touch the TALEXX modules at the edges 

correct (left) and incorrect (right) 

Bending stress 

Bending the circuit board of a TALEXX module by more than 3 % along its length may damage the 

product and is therefore not permitted. 3 % corresponds for example to 6 mm for a 200 mm long module. 

Max. bending stress for LED strip modules 



Handling of chemical substances 

Chemical substances are present in the vicinity of TALEXX modules in a wide range of applications. 

Below are the known areas in which chemical substances are used: 

use of protective coating in applications with high 

relative humidity (outdoor applications), 

encapsulation of LED modules, 

cementing of LED modules, 

sealing of luminaires. 

Protection measures for the glob top material 

The following guidelines must be observed to avoid damage to the glob-top: 

Make sure that the chemicals used in LED applications are not solvent-based, condensation 

crosslinked or acetate crosslinked (acetic acid). These give rise to reagents (e.g. solvent vapors, 

acetic acid) that may damage TALEXX module or the glob-top. This applies to chemicals that are 

used not in the immediate vicinity of the modules (e.g. seals) and also to chemicals that come into 

direct contact with the modules (e.g. insulating coatings, adhesives). 

powerLED P211, original powerLED P211, 

damaged by dissolver waste gas 

Protection measures in regards to sealing 

The points above also apply to chemicals used for sealing luminaire casings. If however the TALEXX 

module is not installed in the luminaire until after the sealing compound has been completely cured (see 

relevant material information) the above points can be ignored. 

If the TALEXX modules have already been installed in the luminaire, possible damage to the glob-top can 

be reduced to a minimum by ensuring adequate spacing (>10 cm) and ventilation (open casing and air 

circulation, extraction / fan) during the curing process. 

Protection measures in regards to cementing 

To avoid damaging the TALEXX modules you must not use any tools or exert any pressure on the 

electronic components or the glob top. 

If glass or Plexiglas shields are used make sure that pressure is not exerted on the glob-top. 

Only touch the TALEXX modules at the edges 



Instructions for cementing TALEXX modules 

Preparation 

Clean and durable bonding of two materials requires special attention. 

The following cleaning agents are recommended: 

Isopropanol / Water 50/50 

Acetone 

Heptane 

Important aspects 

Carrier material 

The carrier material must have adequate thermal conductivity (e.g. aluminium). The size of the 

cooling surface depends on the power of the LEDs, among other things. For information on the 

cooling surface required, see the appropriate product data sheet. 

Adhesive material 

The carrier material itself plays an important role in selecting the adhesive material. The crucial 

factors are the coefficient of expansion and compatibility with the base material of the TALEXX 

module board (plastic or aluminium). This must be checked in the application in terms of long-term 

stability, surface contamination and mechanical properties. 

Surface quality 

The carrier material must be uncoated (thermal transport, adhesion) and level at the connection 

points. 

Installation temperature 

To achieve optimum adhesion we recommend you carry out this work at room temperature. 

Duration, optimum adhesive strengths 

Maximum adhesion is achieved within 48 hours at room temperature; the process is accelerated 

by heat. In actual practice this means that at the maximum tc temperature (approx. 75-85 °C, 

product-specific) maximum adhesion is reached after about 12 hours. During the curing period 

make sure that there is no tensile load on the adhesive connection of the TALEXX module. 

Additional information 

TALEXX modules must not be stuck and restuck time and again without replacing the adhesive tape. 

Damaged adhesive tapes must be completely removed and replaced by new tapes. 

Packaging and transport 

TALEXX products from Tridonic are delivered in appropriate packaging. The packaging provides special 

protection against mechanical damage and ESD (electrostatic discharge). If you need to transport 

TALEXX products you should use this packaging. 

Installing the modules 

The modules are mounted on a heat sink with 2 bolts per module. In order not to damage the modules 

only raised head bolts should be used. The bolts should be selected on the basis of the following 

dimensions: 



Dimensions of the fastening bolts 

Bolt size M3 * 

Max. diameter D 5.8 mm 

Min. length L 10 mm 

Max. length L Depending on the design of the 

luminaire and the heat sink 

Max. bolt head height k 1.3 mm for flat reflectors, 

higher values for steep reflectors 

* Use M3 bolts according to DIN 84 (ISO 1207, UNI 6107). 

Different bolt head heights 

Flat reflectors Steep reflectors 

The bolt head height of flat reflectors must not 

exceed a maximum of 1.3 mm. 

Further information 

The bolt head height of steep reflectors can be 

more than 1.3 mm. 

Detailed information on the thermal connection and the position of the t point is given at 

c 

"Thermal aspects". 



Dimensional drawings 

Dimensional drawing of the modules TALEXXmodule STARK 

SLE GEN2 SELECT and TALEXXmodule STARK SLE GEN2 

CLASSIC 

With housing 



Without housing 


CAD data for the modules can be downloaded from the Tridonic homepage (www.tridonic 

.com) 

and the relevant product page. 

Remote converters for TALEXXmodule STARK SLE GEN2 

SELECT, CLASSIC and Food Colour GOLD 

Length L max. 207 mm 

Width W max. 42 mm 

Height H max. 31 mm 



In-built converter for TALEXXengine STARK SLE GEN2 SELECT, 

CLASSIC and Food Colour GOLD 

Length L max. 123 mm 

Width W max. 79 mm 

Height H max. 31 mm 

... 


Detailed information and CAD data for the converters can be downloaded from the 

Tridonic homepage www.tridonic.com and the relevant product page. 


&nbsp Electrical Aspects 

Electrical aspects 

Electrical connections 

Electrical safety 

All the components of the TALEXXengine STARK SLE GEN2 system comply with the SELV standard. 

The voltages are therefore less than 50 V. 

Safety extra low voltage (SELV) is defined as ac voltages up to 50 V rms and dc voltages up to 120 V. 

SELV is part of the low-voltage range. These voltages are not life-threatening to an adult and correspond 

to the maximum constant contact voltage or fault voltage. 

Thanks to SELV voltage, the luminaire can be replaced without risk. There is no need in this case to 

disconnect the luminaire from the power supply. 

Screw terminals on the converter 

The connections between the converter and the power supply and the connections of the control lines 

are made via screw terminals on the converter. 

Screw size M3 

Max. torque 0.5 nm 

Diameter of the cables for strain relief 6.3 to 9.7 mm 

Permissible cable cross-section for terminal: 0.5-2.5 mm² 



Connections on the converter 

Connections on the converter for TALEXXmodule STARK SLE 

GEN2 SELECT and TALEXXmodule STARK SLE GEN2 CLASSIC 

Pin Connection on the TALEXXconverter Design 

Function earth Screw 

terminal 

~ Power input 230 – 240 V AC Screw 

terminal 

~ Power input 230 – 240 V AC Screw 

terminal 

DA* Control input for DALI / switchDIM Screw 

terminal 

DA* Control input for DALI / switchDIM Screw 

terminal 

+FAN Feed for active cooling Screw 

terminal 

-FAN Feed for active cooling Screw 

terminal 

+LED TALEXXmodule STARK SLE GEN2 SELECT / 

TALEXXmodule STARK SLE GEN2 CLASSIC / 

TALEXXmodule STARK SLE GEN2 Food Colour 

GOLD 

-LED TALEXXmodule STARK SLE GEN2 SELECT / 

TALEXXmodule STARK SLE GEN2 CLASSIC / 

TALEXXmodule STARK SLE GEN2 Food Colour 

GOLD 

Screw 

terminal 

Screw 

terminal 

NTC Temperature monitoring Screw 

terminal 

NTC Temperature monitoring Screw 

terminal 

* Only for converters with dimming function 



Wiring diagrams 

Wiring diagram for switchDIM for TALEXXengine STARK SLE 

GEN2 SELECT, TALEXXengine STARK SLE GEN2 CLASSIC and 

TALEXXmodule STARK SLE GEN2 Food Colour GOLD 

The wiring diagram shows the connection between a converter and a TALEXXmodule STARK SLE 

GEN2 SELECT, TALEXXmodule STARK SLE GEN2 CLASSIC and TALEXXmodule STARK SLE GEN2 

Food Colour GOLD module and the connection between the converter and the power supply. 

The integrated switchDIM function is operated via an appropriate momentary-action switch. 



Wiring diagram for DALI for TALEXXengine STARK SLE GEN2 

SELECT, TALEXXengine STARK SLE GEN2 CLASSIC and 

TALEXXmodule STARK SLE GEN2 Food Colour GOLD 

The wiring diagram shows the connection between a converter with dimming function and a 


TALEXXmodule STARK SLE GEN2 Food Colour GOLD module and the connection between the 

converter and the power supply and the digital DALI signal. 

The converters with the dimming function of the systems TALEXXengine STARK SLE GEN2 SELECT, 

TALEXXengine STARK SLE GEN2 CLASSIC and TALEXXmodule STARK SLE GEN2 Food Colour 

GOLD support DALI Device Type 6. 



Wiring diagram for ON/OFF via mains for TALEXXengine STARK 

SLE GEN2 SELECT, TALEXXengine STARK SLE GEN2 CLASSIC 

and TALEXXmodule STARK SLE GEN2 Food Colour GOLD 

The wiring diagram shows the connection between a converter without the dimming function and a 


TALEXXmodule STARK SLE GEN2 Food Colour GOLD and the connection between the converter and 

the power supply. 

... 


&nbsp Optical Aspects 

Optical aspects 

Colour spectrum 

The Dam&Fill technology used in the TALEXX products enables LEDs to be produced in special light 

colours or colour temperatures. This means that lighting systems can be created that are not only 

energy-efficient but also have excellent colour rendering. 

3,000 K 

4,000 K 



5,000 K 

Colour spectrum at different colour temperatures 

The diagram shows the normalised intensity in percent over the wavelength in nm at different colour 

temperatures. 

Coordinates and tolerances (to CIE 1931) 

As before, the production process for TALEXX LEDs does without binning. As a result, white LEDs can 

be produced with normal distribution in the range of a MacAdam-Ellipse 3. Thanks to the proximity to the 

Planckian curve there are no annoying colour discrepancies. 

Every module is automatically tested at the final inspection stage to ensure that all the supplied products 

fall within the agreed specification. 



Location of the measuring points along the Planckian curve: 

Ambient temperature 

of the measurement: 

Measurement tolerances 

of the colour 

coordinates: 

t = 25 °C. 

a 

±0,01. 

Coordinates and tolerances 

Light colours 

TALEXXengine STARK SLE GEN2 SELECT are available in 3,000K, 4,000K, GOLD. 

TALEXXengine STARK SLE GEN2 CLASSIC are available in 3,000K, 4,000K, 5,000K versions. 

TALEXXengine STARK SLE GEN2 Food Colour GOLD is available. 

MacAdam Ellipse: GOLD 

x0 y0 

Centre 0.4633 0.4169 



MacAdam Ellipse: 3,000 K 

x0 y0 

Centre 0.4369 0.4041 


x0 y0 

Centre 0.3804 0.3764 




x0 y0 

Centre 0.3451 0.3516 

Eye safety 

Risk group Evaluation 

Actinic UV E 

S 

(200 - 400 nm) 

Near UV E 

UVA 

(315 - 400 nm) 

Blue light L 

B 

(300 - 700 nm) 

Retina, thermal L 

R 

(380 - 1,400 nm) 

IR radiation, eye E 

IR 

(780 - 3,000 nm) 

Risk group 0* 

Risk group 0* 

Risk group 0* 

Risk group 0* 

Risk group 0* 

* The evaluation of eye safety is based on EN 62471:2008 (photo-biological safety of lamps and lamp 

systems): 



systems): 

Risk-free (risk groups 0, 1, 2 and 3): The LEDs do not pose any photo-biological risk. 

Low risk: The LEDs pose a small risk because of normal limitations. 

Medium risk: The LEDs pose a small risk because of reactions to bright light sources or thermal 

discomfort. 

High risk: The LEDs pose a risk even with just momentary or temporary exposure. 

Reflector design and beam characteristics 

Reflektor design 

The mechanical and optical properties of the modules of the TALEXXengine STARK SLE GEN2 system 

offer the best conditions for using reflectors. The overall efficiency of the system can be optimised by 

choosing a reflector that directs the light appropriately. 

The optical properties (e.g. beam angle) and the dimensions of the reflector play a crucial role. 

The overall height of the luminaire can be reduced by selecting a low-profile reflector, depending on the 

beam angle required. This may improve the thermal output of the luminaire by increasing the height 

available for the heat sink. 

To achieve uniform illumination a reflector withy an integrated diffuser is recommended for LED modules 

with multicolour LEDs. This ensures that the colours are properly mixed. Some reflectors have the option 

of faceting for the reflector wall. Depending on the position of the homogenising element, different 

efficiencies and different colour mixing results can be achieved. 

Examples of reflectors with different beam angles 


Tridonic can supply the CAD data for the modules on request to help create customised 

designs and to carry out optical simulations. 

Sources for the reflectors are given at "Partners". 



Beam characteristics, TALEXXmodule STARK SLE GEN2 

Average illuminance referred to the lumen values of 

TALEXXmodule STARK SLE GEN2 

Mounting height Diameter of the beam LES19 LES23 LES26 

0.25 m 0.65 m 4,180 lux 6,098 lux 9,044 lux 

0.5 m 1.30 m 1,045 lux 1,525 lux 2,261 lux 

0.75 m 1.94 m 464 lux 678 lux 1,005 lux 

1.0 m 2.59 m 261 lux 381 lux 565 lux 

... 


&nbsp Thermal Aspects 

Thermal aspects 

Module cooling 

Effect of cooling on the life of the modules 

The modules of theTALEXXengine STARK SLE GEN2 system have been designed to operate with a 

passive or active heat sink and can be mounted directly on such a suitable heat sink. 

The life of the module depends to a large extent on the operating temperature. The more that the 

operating temperature can be reduced by cooling, the longer the expected life of the module. If the 

permitted operating temperature is exceeded, however, the life of the module will be significantly 

reduced. 

Lifetime characteristic: 

The diagram shows the change in luminous flux in % over an operating time of 1,000 h at different tc 

operating temperatures. 

Luminous flux Operating time in HE mode at tp = 65 °C 

80 % 50,000 h 

70 % 80,000 h 

50 % 156,000 h 




Please check the information on the operating temperature and the requirements for 

cooling in the module data sheets. 

Requirements for the heat sink 

Although the operating temperature of the modules is continually monitored during operation and the 

power is automatically reduced in the event of excess temperature, the modules should not be operated 

without a heat sink. 

The heat sinks must be dimensioned to provide adequate cooling capacity. 

The R value is important for selecting an appropriate heat sink. This value depends on the light output 

th 

of the module and on the ambient temperature in which the module is to be operated. The Rth value of 

the heat sink must be smaller than the required R value. 

th 


Please check the information on heat sinks in the module data sheets. 

Sources for suitable heat sinks are given at "Partners". 

Passive and active cooling 

Passive cooling 

Passive cooling module Example of passive cooling for the module 

Heat transfer from a heat source to the surrounding cooling medium (e.g. air) depends primarily on the 

difference in temperature, the effective surface area and the flow rate of the cooling medium. The 

function of a heat sink is to increase the surface area over which the heat can be dissipated. This lowers 

the thermal resistance. 



the thermal resistance. 

A passive heat sink works mainly by convection. The surrounding air is heated, which makes it rise, and 

is replaced by cooler air. 

Heat pipes can be used as an alternative to cooing with fans. If space is particularly tight, the heat is first 

conveyed away. The actual heat sink is located at the other end of the heat pipe. 

Benefits of passive cooling: 

Energy savings 

Silent 

No mechanical wear 

No maintenance 

Active cooling 

Round active cooling module 

round 

Square active cooling module Example of active cooling for the 

module 

An active heat sink consists of the heat sink itself and an electrically powered fan. The fan dissipates 

heat from the heat sink by blowing a sufficient quantity of air along the surface of the heat sink. To reduce 

the power draw and noise, the fan speed can be controlled from the active cooling system on the basis of 

temperature.* A diaphragm can be used as an alternative to fans to produce active air movements. 

Active heat sinks with fan cooling achieve around six times the performance of passive heat sinks for the 

same amount of material used. Active heat sinks can therefore be made very compact. 

* The fan speed is not controlled from the TALEXXengine STARK system. 



Benefits of active cooling: 

Space savings 

Effective cooling 

Professional design 

Fan connection and temperature measurement 

Connections of the fan to the converter for TALEXXmodule 

STARK SLE GEN2 SELECT, TALEXXmodule STARK SLE GEN2 

CLASSIC and TALEXXmodule STARK SLE GEN2 Food Colour 

GOLD 

For active cooling of the TALEXXmodule STARK SLE GEN2 SELECT, TALEXXmodule STARK SLE 

GEN2 CLASSIC and TALEXXmodule STARK SLE GEN2 Food Colour GOLD versions the fan is 

connected to the converter. 

Fan connection on the converter 

+FAN + 

-FAN - 



Temperature measurement on the module 

There is a t point underneath the modules for checking the temperature of the 

c 

modules: 

The temperature at the tc point can be measured with a simple temperature 

probe. Since the underside of the modules is made from anodised aluminium, any 

measurements made by an infra-red camera would lead to inaccurate results. 

In actual practice, thermocouples (e.g. B & B Thermotechnik thermocouple, 

K-type) have been successfully used for taking measurements. Such 

thermocouples can be attached directly to the tc point with heat-resistant adhesive 

tape or a suitable adhesive. The measured values are recorded by an electronic 

thermometer (e.g. "FLUKE 51", VOLTCRAFT K202 data logger). 

The maximum possible temperature must be determined under worst-case 

conditions (ambient temperature of the luminaire, installation of the luminaire) for 

the relevant application. Before the measurement is taken the luminaire should be 

operated for at least 4 hours in a draught-free room. 

Temperature management of the converters 

Although the converters have an integrated temperature management system the requirements relating 

to cooling of the converters must also be taken into account. Unintentional automatic dimming at 

overtemperature, for example, indicates inadequate cooling of the converter. 

The temperature at the t point on the converter can be measured with a simple temperature probe. The 

c 

tc point on the converter is indicated by a sticker on the casing. 

... 


Measurement conditions, sensors and handling are described in detail in standard EN 

60598-1 “General requirements and tests for luminaires”. 

Sources for suitable heat-conducting foil and pastes for thermal connection to a 

temperature probe are given at "Partners". 


&nbsp Ordering information and sources 

Ordering information and sources 

Article numbers 

TALEXXengine STARK SLE GEN2 CLASSIC with LES19 

Product name Article number Description 


830 CLA 


840 CLA 


750 CLA 

STARK SLE PURE G2 

LES19 830 CLA 


LES19 840 CLA 


LES19 750 CLA 

89601652 3,000 K 

89601632 4,000 K 

89601633 5,000 K 

89601622 3,000 K 

89601623 4,000 K 

89601624 5,000 K 






830 CLA 


840 CLA 


750 CLA 


LES23 830 CLA 


LES23 840 CLA 


LES23 750 CLA 

89601634 3,000 K 

89601635 4,000 K 

89601636 5,000 K 

89601625 3,000 K 

89601626 4,000 K 

89601627 5,000 K 




830 CLA 


840 CLA 


750 CLA 


LES26 830 CLA 


LES26 840 CLA 


LES26 750 CLA 

89601637 3,000 K 

89601638 4,000 K 

89601639 5,000 K 

89601628 3,000 K 

89601629 4,000 K 

89601630 5,000 K 



TALEXXengine STARK SLE GEN2 SELECT with LES19 



930 SEL 


940 SEL 


LES19 930 SEL 


LES19 940 SEL 

89601660 3,000 K 

89601661 4,000 K 

89601669 3,000 K 

89601670 4,000 K 




930 SEL 


940 SEL 


MEAT+ SEL 


GOLD SEL 


LES23 930 SEL 


LES23 940 SEL 

89601663 3,000 K 

89601664 4,000 K 

89601662 

89601665 2,700 K 

89601672 3,000 K 

89601673 4,000 K 






930 SEL 


940 SEL 


MEAT+ SEL 


GOLD SEL 


LES26 930 SEL 


LES26 940 SEL 

... 

89601666 3,000 K 

89601667 4,000 K 

89601678 - 

89601668 2,700 K 

89601675 3,000 K 

89601676 4,000 K 



TALEXXengine STARK SLE GEN2 Food colour GOLD with LES23 



GOLD 


LES23 GOLD 

89601665 2,700 K 

89601674 2,700 K 

TALEXXengine STARK SLE GEN2 Food colour GOLD mit LES26 



GOLD 


LES26 GOLD 

Suitable controllers 

89601668 2,700 K 

89601677 2,700 K 

Tridonic offers a comprehensive range of DALI-compatible products. All the devices specified here 

support DALI Device Type 6 and therefore guarantee effective use of TALEXXengine STARK SLE 

GEN2. 



Product name Article number 

DALI M-Sensor 86458265 

DALI SC 24034263 

DALI MC 86458507 

DALI Touchpanel 24035465 

x-touchBOX 24138954 

x-touchPANEL 24138990 

DALI PS 24033444 

DALI USB 24138923 


Go to www.tridonic.com to see the current range of products and the latest software 

updates. 

Product applications and partners 

Product application matrix 

Whether you are looking for wide-area lighting or focused accent lighting, our wide range of TALEXX 

products will help you create an individual atmosphere and highlight specific areas exactly as you want. 

Our product portfolio includes individual light points, round, rectangular and strip versions. Specially 

matched operating equipment such as converters, amplifiers and sequencers round off the components 

for a perfect system solution: They guarantee ideal operation and maximum efficiency. 



Luminaire application 

TALEXXengine Downlight Spotlight Linear / 

rectangular 

TALEXXengine STARK 

DLE 

TALEXXengine STARK 

SLE 

TALEXXengine 

FULMEN 

+ 

+ + + + 

TALEXXengine LINE + + 

Luminaire application 

TALEXXmodule Downlight Spotlight Linear / 

rectangular 

+ 

TALEXXmodule SPOT + + + + 

TALEXXmodule 

RECTANGULAR 

Decorative Surface Outdoor 

(street) 

Decorative Surface Outdoor 

(street) 

TALEXXmodule EOS + + + + + + 

TALEXXmodule STRIP + + 

TALEXXmodule TAPE + + 

For more information and technical data on the entire TALEXX product portfolio go to led.tridonic.com or 

see our TALEXX catalogue. 

... 


+


Partners 

Heat sinks 

Heat sinks with active and passive cooling to match the module can be obtained from the following 

manufacturers: 

BRYTEC AG Brytec GmbH 

Vierthalerstrasse 5 

AT-5020 Salzburg 

T +43 662 87 66 93 

F +43 662 87 66 97 

info@brytec.at 

Nuventix 

Vertrieb Österreich 

EBV Distributor 

Schonbrunner Straße 297-307 

1120 Wien 

T +43 1 89152-0 

F +43 1 89152-30 

www.ebv.com 

SUNON European Headquarters 

Sales area manager 

Direct line: 0033 1 46 15 44 98 

Fax: 0033 1 46 15 45 10 

Mobile: 0033 6 24 07 50 49 

andreas.rudel@sunoneurope.com 

Heat sinks with active cooling can be obtained from the following manufacturers: 

Francois JAEGLE 

NUVENTIX EMEA Sales and Support Director 

+33 624 73 4646 

PARIS 

fjaegle@nuventix.com 

Heat sinks with passive cooling can be obtained from the following manufacturers: 

AVC 

Asia Vital Components Europa GmbH 

Willicher Damm 127 

D-41066 Mönchengladbach 

T +49 2161 5662792 

F +49 2161 5662799 

sales@avc-europa.de 

FrigoDynamics GmbH 

Bahnhofstr. 16 

D-85570 Markt-Schwaben 

Germany 

+49-8121-973730 

+49-8121-973731 

www.frigodynamics.com 



Reflector solutions and reflector design 

Reflector solutions and support for reflector design are available from the following partners: 

Alux-Luxar GmbH & Co. KG 

Schneiderstrasse 76 

40764 Langenfeld 

Germany 

T +49 2173 279 0 

sales@alux-luxar.de 

Jordan Reflektoren GmbH & Co. KG 

Schwelmerstrasse 161-171 

42389 Wuppertal 

Germany 

T +49 202 60720 

info@jordan-reflektoren.de 

LEDIL OY 

Tehdaskatu 13 

24100 Salo, Finland 

F +35 8 2 7338001 

Heat-conducting foil and paste 

Heat-conducting foil (e.g. Transtherm® T2022-4, or Transtherm® Phase Change) for thermal connection 

between the module and a heat sink is available from the following partner: 

BALKHAUSEN Division of Brady GmbH 

Rudolf-Diesel-Straße 17 

28857 Syke 

Postfach 1253, 28846, Syke 

T +49 4242 692 0 

F +49 4242 692 30 

angebot@balkhausen.de 

Heat-conducting paste (e.g. Silicone Fluid Component) for thermal connection between the module and a 

heat sink is available from the following partner: 

Shin-Etsu Chemical Co. Ltd. 

6-1, Ohtemachi 2-chome 

Chiyoda-ku 

Tokyo 100-0004 

Japan 



Tridonic sales organisation 

AUSTRALIA 

Tridonic Australia Pty Ltd 

Private Bag No. 9 

130 Melrose Drive, Tullamarine, 

Victoria, 3043 

Australia 

T +61 3 9339 0200 

F +61 3 9330 3595 

www.tridonic.com.au 

Tridonic Australia Pty Ltd 

P.O. Box 120 

Unit F1 Palm Grove Business 

Park 

13-15 Forrester Street 

Kingsgrove NSW 2208 

Australia 

T +61 2 9503 0800 

F +61 2 9503 0888 


AUSTRIA 

Tridonic GmbH & Co KG 

(Headquarters) 

Färbergasse 15 

6851 Dornbirn, Österreich 

T +43 5572 395-0 

F +43 5572 20176 

www.tridonic.com 

sales@tridonic.com 

Tridonic GmbH & Co KG Sales 

Austria 

Archenweg 58 

6022 Innsbruck, Österreich 

T +43 512 3321554 

F +43 512 3321-995554 

vertrieb.austria@tridonic.com 

www.tridonic-ct.com 

office@tridonic-ct.com 

BELGIUM 

Tridonic 

Sales Belgium 

39, Rue Gaston Bay 

1310 La Hulpe, Belgique 

T +32 2 652 1964 

F +32 2 652 0718 

pauwels.tridonic@skynet.be 

HONG KONG 

GLM International Limited 

Tridonic Sole Agent 

Hong Kong Unit 2205, Westin 

Centre 

26 Hung To Road, 

Kwun Tong, Kowloon, Hong 

Kong 

T +852 23983918 

F +852 23983911 

sales@glm.com.hk 

HUNGARY 

HOLUX Co. Ltd Lighting 

Systems Béké út. 51-55 

1135 Budapest, Hungary 

T +36 1 450 27 00 

F +36 1 450 27 10 

www.holux.hu 

sales usa@tridonic.com 

INDIA 

Atco Controls (India) Pvt. Ltd. 

38B Nariman Bhavan, 

Nariman Point 

Mumbai, 400 021, India 

T +91 22 2202 5528 

F +91 22 2203 2304 

sales@atcocontrols.com 

INDONESIA 

P.T. Sahabat Indonesia 

Jl Muara Karang Selatan Blok 

A, Utara 1 

Kawasan Industri 

Pergudangan 

Jakarta Utara 14440 

Indonesia 

T +62 21 661 0651 / 662 

1780 

F +62 21 660 3700 

sahabat@uninet.net.id 

RUSSIA 

TOCHKA OPORY Fakultetskij 

per. 12 

RU-125080 Moskow, Russia 

T +7 095 1581359 

F +7 095 1582433 

Michael.Ekassov@tridonic.com 

SINGAPORE 

Lumitron Pte Ltd 

103 Kaki Bukit Avenue 1, 

Shun Li Industrial Park, 

Singapore 415986 

T +65 6846 2288 

F +65 6846 2289 

Tridonic S.E.A Pte Ltd 

1 Kaki Bukit View 

#05-13, Techview 


T +65 6292 8148 

F +65 6293 3700 

SLOVAKIA 

SCHÄFER & SYKORA spol. 

s.r.o. Cihlarska 1000/2 

40801 Rumburk 

Czech. Republic 

T +420 412 354 931 

F +420 412 354 945 

www.svetlosasa.cz 

svetlo@sasa.cz 

SLOVENIA 

ETT LIGHTING d.o.o. Dobrna 7 

3204 Dobrna, Slovenia 

T +386 3 7801070 

F +386 3 7801078 

www.ett-lighting.com 

info@ett-lighting.com 



BULGARIA 

ROS 

Rossiza Dontscheva 

Topolniza 1 

1510 Soia 

Bulgaria 

T: +359 2 943 42 32 

F: +359 2 945 73 62 

oice@ros-bg.com 

www.ros-bg.com 

CHILE 

GENERAL ELECTRIC DE CHILE 

SA Casilla 2103 

AV. VICUNA MACKENNA 2385 

7040060 Santiago, Chile 

T +56 24214224 

F +56 24214221 

flavio.gonzalez@lighting.ge.com 

CHINA 

Tridonic (Shanghai) Co., Ltd. 

(Headquarters) 

Building 3, 799 West Tianshan 

Road 

Shanghai, 200335, China 

T +86 21 52400599 

F +86 21 52400230 

china@tridonic.com 

Tridonic (Shanghai) Co., 

Ltd. Beijing Branch 

Room 1217, Block B, 

COFCO Plaza No. 8 Jian Guo 

Men Nei Da Jie, 

Beijing, 100005, China 

T +86 10 65226163 

F +86 10 65227003 


Tridonic (Shanghai) Co., 

Ltd. Guangzhou Branch 

505, R & F Profit Plaza, 

Huangpu Xi Road, Tianhe District 

Guangzhou, 510623, China 

T +86 20 38392483 

F +86 20 38392482 


ITALY 

Tridonic Italia srl 

viale della Navigazione 

Interna 115 

35027 Noventa Padovana 

(PD) 

T +39 049 89 45 127 

F +39 049 87 04 715 

www.tridonic.it 

vendite.italia@tridonic.com 

servizio.tecnico@tridonic.com 

Sicom Spa 

Via Lussemburgo, 10-12 

35127 Padova-Zona Ind. 

T +39 049 8701470 

F +39 049 8700738 

www.sicom-pd.it 

KOREA (SOUTH) 

One4all Lighting Co. Ltd 

#D-501, Bundang Techni 

Park 

Sungnam-si, Kyungki-do 

463-740 Seoul 

Korea 

T +82 2 417 9877, 418 1172 

F +82 2 416 5553 

Mobil +82 10 3999 9720 

one4all@one4all.co.kr 

KROATIEN 

ETT LIGHTING d.o.o. Dobrna 

7 

3204 Dobrna, Slovenia 

T +386 3 7801070 

F +386 3 7801078 

www.ett-lighting.com 

info@ett-lighting.com 

LATVIA 

Wennerström Ljuskontroll AB 

Källdalen 

645 91 Strängnäs, Sverige 

T +46 152 91000 

F +46 152 91078 

www.ljuskontroll.com 

sales@ljuskontroll.com 

LITHUANIA 


Källdalen 


T +46 152 91000 

F +46 152 91078 



SPAIN 

Tridonic Iberia, S.L. 

OFICINA CENTRAL - MADRID 

Calle Carpinteros nº 8, 2a 

Poligono Industrial Pinares 

Llanos 

28670 Villaviciosa de Odón 

(Madrid) 

Spain 

Tel: +34 916 162 095 

Fax: +34 916 165 695 

ventas@tridonic.com 

www.tridonic.es 

SRI LANKA 

GENERAL SALES Co., Ltd. 

Senanayake Building, 

No. 7, Station Road, Colombo 

7, Sri Lanka 

T +94 1 574 511 

F +94 1 573 673 

gescoms@mail.ewisl.net 

SOUTH AFRICA 

Tridonic SA (Pty) Ltd 

53-57 Yaldwyn Road, Hughes 

Extension, Jet Park, 1459 

P.O. Box 30542, Jet Park, 1469 

South Africa 

T +27 11 923-9686 

F +27 11 923-9684 

info@tridonic.co.za 

SWEDEN 


Källdalen 


T +46 152 91000 

F +46 152 91078 



SWITZERLAND 

Tridonic AG Obere Allmeind 2 

8755 Ennenda, Schweiz 

T +41 55 6454747 

F +41 55 6454700 

www.tridonic.ch 

lumitron@pacific.net.sg 

Tridonic S.E.A Pte Ltd 

1 Kaki Bukit View 

#05-13, Techview 


T +65 6292 8148 

F +65 6293 3700 



CZECH REPUBLIC 

SCHÄFER & SYKORA spol. s.r.o. 

Cihlarska 1000/2 

40801 Rumburk 

Czech. Republic 

T +420 412 354 931 

F +420 412 354 945 

www.svetlosasa.cz 

svetlo@sasa.cz 

DENMARK 

as Electrotrading 

Skiveien 6 

Postboks 333 

1411 Kolbotn, Norge 

T +47 6681 7330 

F +47 6681 7333 

jan-erik@electrotrading.no 

GERMANY 

Tridonic Deutschland GmbH 

Edisonallee 1 

89231 Neu-Ulm, Deutschland 

T +49 731 176629-0 

F +49 731 176629-15 

vertrieb.deutschland@tridonic.com 

EASTERN EUROPE 

Tridonic 

Sales Eastern Europe 

Waldfriedenstraße 4a 

16792 Zehdenick-Neuhof 

Deutschland 

T +49 3307 420046 

F +49 3307 420047 

manfred.heinrich@tridonic.com 

ESTONIA 


Källdalen 


T +46 152 91000 

F +46 152 91078 


FINLAND 


Källdalen 


T +46 152 91000 

F +46 152 91078 


MALAYSIA 

Tridonic (Malaysia) Sdn Bhd 

No. 1, Jalan Canggih 9, 

Taman Perindustrian 

Cemerlang 

81800 Ulu Tiram, Johor, 

Malaysia 

T +65 6292 8148 (Singapore 

Office) 

F +60 3 91732833 

M +60 12 3665281 (Malaysia 

contact) 

daniel.sy.wong@tridonic.com 

MIDDLE EAST 

Tridonic (ME) FZE P.O. Box 

17972 

Jebel Ali Free Zone 

Dubai, United Arab Emirates 

T +971 4 8833664 

F +971 4 8833665 

Sales-TAME@tridonic.com 

NEW ZEALAND 

Tridonic NZ Ltd. 

Airport Oaks Mangere 

P.O. Box 107044 

9 Aintree Ave 

Auckland, New Zealand 

T +649 256 2310 

F +649 256 0109 


sales@tridonic.co.nz 

NETHERLANDS 

Elpro b.v. Pascalstraat 3-I 

2811 El Reeuwijk, 

Netherlands 

T +31 182 533633 

F +31 182 570414 

www.elpro.nl 

jan-erik@electrotrading.no 

PHILIPPINES 

Pacific Lightech Corporation 

420, Ortigas Avenue Corner 

Xavier Street 

Greenhills, San Juan City 

Manila 

Philippines 

T +632 721 0326-66 

F +632 721 0361 

TAIWAN 

BJB Electric Taiwan 

Corporation 

Tridonic Sole Agent Taiwan 

4 / F, No. 108, Chow-Tze 

Street, 

Nei-hu District (114), Taipei, 

Taiwan 

T +886 2 2627 7722 

F +886 2 2627 1122 

bjb@bjb.com.tw 

Video Conf.: 886 2 8178 

0647~9 

THAILAND 

DEP Engineering Co. Ltd 

107 / 3, Chalermprakiat Rama 9 

Road Prawet Sub-District, 

Prawet District Bangkok 10250 

T +66 (0) 2726 7575 

F +66 (0) 2726 7600 

TURKEY 

Tridonic 

Aydınlatma TİC.LTD. ŞTİ. 

Kemankeş Mah., 

Necatibey cad. Akçe Sok., Akçe 

Han 10 

TR-34420 Karaköy / Beyoğlu 

Istanbul, Turkey 

T +90 212 244 78 05 

F +90 212 244 78 06 

satis@tridonic.com 

ER ELEKTRONIK SAN VE TIC 

AS 

(for resellers) 

YENIYOL SK N:16 

80370 KASIMPASA / 

ISTANBUL 

Turkey 

T +90 212 2971941 

F +90 212 238 7421 

erelektronik@turk.net 

USA 

TRIDONIC Inc. 

4405 International Boulevard 

Suite B-113 

Norcross, GA 30093, USA 

Toll-free: 1-866-TRIDONIC 

T +1 770 717 0556 

F +1 770 717 7969 

www.tridonic.com 

sales_usa@tridonic.com 



FRANCE 

Tridonic France 

34 Rue de l'Expansion 

67150 Erstein Gare, France 

T +33 3 88 59 62 70 

F +33 3 88 59 62 75 

info@tridonic.fr 

GREECE 

2 KAPPA Ltd. Stadiou 40 

Kalohori 

570 09 Thessaloniki, Greece 

T +30 2310 775510-13 

F +30 2310 775514 

www.2kappa.gr 

2kappa@pel.forthnet.gr 

info@2kappa.gr 

GREAT BRITAIN 

Tridonic UK Limited 

Thomas House Hampshire 

International Business Park 

Crockford Lane Chineham 

Basingstoke 

Hampshire RG 24 8LB United 

Kingdom 

T +44 1256 374300 

F +44 1256 374200 

enquiries.uk@tridonic.com 

... 

POLAND 

NARVA-Polska Sp. z o.o. 

ul. Prosta 69, 00-838 

Warszawa 

Poland 

T +48 22 444 19 60 

F +48 22 444 19 61 

www.narva.com.pl 

biuro@narva.com.pl 

PORTUGAL 

Tridonic 

Sales Office Portugal 

Rua do Centro Cultural, 11 

1700 - 106 Lisboa, Portugal 

T +351 218 438 456 

F +351 218 446 613 

rui.madrugo@tridonic.com 

ROMANIA 

Energolux SRL 

Str. Taietura Nr. 47 / 11 

400221 - Cluj / Napoca 

Romania 

T +40 264 207500 

F +40 264 207555 

ebit@energobit.com 

UNITED ARAB EMIRATES 

Tridonic (ME) FZE P.O. Box 

17972 

Jebel Ali Free Zone, Dubai 

United Arab Emirates 

T +971 4 8833664 

F +971 4 8833665 

Sales-TAME@tridonic.com 

VIETNAM 

Nien Loi Import Export 

Trading Services Co. Ltd 

686/72/32 Cach Mang Thang 

Tam Street 

Ward 11, District 3 

Ho Chi Minh City 

Vietnam 

T +84 8 3993 4314 

F +84 8 3993 4315 

nienloicorp@vnn.vn 



Additional information 

Go to www.tridonic.com to find your personal contact at Tridonic. 

Further information and ordering data: 

TALEXX catalogue at www.tridonic.com menue Services > Literature > Catalogue 

Data sheets at www.tridonic.com menue Technical data > Data sheets 

Certificates at www.tridonic.com menue Technical data > Certificates

TALEXXengine STARK SLE GEN2 SELECT

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?