meccanica magazine138E. Riva, G. Castaldini, F. Braghin, Taloring edge-to-edge pumping via adiabatic transformationsand non-Hermitian shortcuts (2022) Proceedings of SPIE - The International Society for OpticalEngineering, 12043, art. no. 1204308.G. Bianchi, S. Cinquemani, Design of a bioinspired cownose ray robot (2022) Proceedings of SPIE - TheInternational Society for Optical Engineering, 12041, art. no. 1204105.F.M. Bono, S. Cinquemani, S. Chatterton, P. Pennacchi, A deep learning approach for fault detectionand RUL estimation in bearings (2022) Proceedings of SPIE - The International Society for OpticalEngineering, 12049, art. no. 1204908.F.M. Bono, L. Radicioni, S. Cinquemani, C. Conese, M. Tarabini, Development of Soft Sensors basedon neural networks for detection of anomaly working condition in automated machinery (2022)Proceedings of SPIE - The International Society for Optical Engineering, 12049, art. no. 1204907.G. Bianchi, K.P.H.H. Mudiyanselage, S. Cinquemani, Design of a swimming snake robot (2022)Proceedings of SPIE - The International Society for Optical Engineering, 12041, art. no. 120410A.D. Milosavljevic, S. Riva, N. Lecis, S. Cinquemani, P. Bassani, Experimental validation of the BrinsonModel for Cu-based Shape Memory Alloys (2022) Proceedings of SPIE - The International Society forOptical Engineering, 12043, art. no. 120430J.J. Santini, E. Riva, F. Braghin, Temporal waveguiding in modulated 2D lattices (2022) Proceedings ofSPIE - The International Society for Optical Engineering, 12043, art. no. 1204307.G. Bianchi, M. Tealdi, S. Cinquemani, Design of a bioinspired ray robot with flexible fins (2022)Proceedings of SPIE - The International Society for Optical Engineering, 12041, art. no. 120410G.F.M. Bono, S. Cinquemani, L. Radicioni, C. Conese, M. Tarabini, An approach for fault detection based onmultibody simulations and feature selection algorithm (2022) Proceedings of SPIE - The InternationalSociety for Optical Engineering, 12049, art. no. 120490B.A. Nassehi, M. Colledani, B. Kádár, E. Lutters, Daydreaming factories (2022) CIRP Annals, 71 (2), pp. 671-692.A. Casaroli, M. Boniardi, R. Gerosa, F. Bilo, L. Borgese, P. Cirelli, L.E. Depero, Metals release fromstainless steel knives in simulated food contact (2022) Food Additives and Contaminants: Part BSurveillance, 15 (3), pp. 203-211.F. Micheli, M. Bersani, S. Arrigoni, F. Braghin, F. Cheli, NMPC trajectory planner for urban autonomousdriving (2022) Vehicle System Dynamics.F. Zanelli, E. Sabbioni, M. Carnevale, M. Mauri, D. Tarsitano, F. Castelli-Dezza, N. Debattisti, Wirelesssensor nodes for freight trains condition monitoring based on geo-localized vibration measurements(2022) Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.E. Perez, E. Zappa, Video Motion Magnification to Improve the Accuracy of Vision-Based VibrationMeasurements (2022) IEEE Transactions on Instrumentation and Measurement, 71, art. no. 5012712.B. Ren, T. Yin, H.R. Karimi, S. Fu, A Cargo Throughput Capacity Quantization Estimation Using Semi-Markov Jump System Filter Within Partial State Delay (2022) Lecture Notes in Logistics, pp. 326-336.D. Marchisotti, E. Zappa, Feasibility Study of Drone-Based 3-D Measurement of Defects in ConcreteStructures (2022) IEEE Transactions on Instrumentation and Measurement, 71, art. no. 5010711.M. Colledani, O.E. Demir, Dynamic implementation of function-oriented selective and adaptiveassembly in small-lot production (2022) CIRP Annals, 71 (1), pp. 393-396.P. Dahal, S. Mentasti, S. Arrigoni, F. Braghin, M. Matteucci, F. Cheli, Extended Object Tracking inCurvilinear Road Coordinates for Autonomous Driving (2022) IEEE Transactions on Intelligent Vehicles.S. Vieira, M. Benedek, J. Gero, S. Li, G. Cascini, Design spaces and EEG frequency band power inconstrained and open design (2022) International Journal of Design Creativity and Innovation, 10 (4),pp. 193-221.M.C. Magnanini, M. Mastrangelo, T.A.M. Tolio, Hybrid digital modelling of large manufacturing systems tosupport continuous evolution (2022) CIRP Annals, 71 (1), pp. 389-392.G. Carra, D. Formaggioni, M.S. Johnson, P.J. Mistry, A. Bernasconi, S. Bruni, Optimization of a FilamentWound Hybrid Metal Composite Railway Axle Design Concept (2022) Applied Science and EngineeringProgress, 15 (2), art. no. 5791.M. Bertolini, M. Rossoni, G. Colombo, Additive Manufacturing of a Compliant Multimaterial Heart Model(2022) Computer-Aided Design and Applications, 19 (6), pp. 1162-1170.A. Gabrielli, S. Mentasti, G.E. Manzoni, S. Arrigoni, F. Cheli, M. Matteucci, A Framework to StudyAutonomous Driving User Acceptance in the Wild (2022) Lecture Notes in Networks and Systems, 412LNNS, pp. 123-140.S. Mentasti, M. Bersani, S. Arrigoni, M. Matteucci, F. Cheli, End-to-End Learning of Autonomous VehicleLateral Control via MPC Training (2022) Lecture Notes in Networks and Systems, 412 LNNS, pp. 195-211.G. Previati, G. Mastinu, M. Gobbi, Mathematical model for farm tractors towing single axle trailer rolloverprediction (2022) International Journal of Vehicle Performance, 8 (2-3), pp. 132-146.L. Li, Y. Chen, M. Gobbi, Preface (2022) International Journal of Vehicle Performance, 8 (2-3), pp. 129-131.M. Vargas Hernandez, C. Mapelli, J. Cho, N. Kölbl, I. Marschall, M. Alloni, R. Carli, Neuromelt model forestimating mold flux melting behaviour (2022) Metallurgia Italiana, 114 (1), pp. 23-31.N. Frigerio, A. Matta, M. Rasella, Energy monitoring of manufacturing plants: A real case application(2022) Procedia CIRP, 105, pp. 770-775.L.T. Peiró, F. Baiguera, M.S. Crespo, M. Colledani, X.G. I Durany, Advancing in the analysis of materials inelectr(on)ic equipment (2022) Procedia CIRP, 105, pp. 261-266.A. Loffredo, N. Frigerio, E. Lanzarone, M. Ghassempouri, A. Matta, Energy-Efficient Control of Paralleland Identical Machines: Impact on the Overall Production System (2022) Procedia CIRP, 105, pp. 739-744.B. Rivolta, R. Gerosa, D. Panzeri, L. Piazza, L. Angelini, M. Alfonso, N. Bolognani, A. Panzeri, A. Parimbelli,C. Sala, Spheroidizing annealing of thermomechanically hot-rolled steel rods: influence of the priormicrostructure on the mechanical characteristic and phase transformations (2022) Ironmaking andSteelmaking, 49 (7), pp. 716-725.A. Grandi, A.P. Karthikeyan, E.V. Vaz Junior, M.C. Rodriguez, Low-Cost 3D Printed Exoskeleton for Post-Stroke Hand Rehabilitation (2022) Computer-Aided Design and Applications, 19 (6), pp. 1207-1215.N. Rodriguez, M. Sangalli, M.D. Smukowska, M. Covarrubias, Haptic Feedback Glove for ArmRehabilitation(2022) Computer-Aided Design and Applications, 19 (6), pp. 1143-1153.E. Di Gialleonardo, A. Facchinetti, S. Bruni, Control of an integrated lateral and roll suspension for a highspeedrailway vehicle (2022) Vehicle System Dynamics.B. Fu, S. Hossein-Nia, S. Stichel, S. Bruni, Wheel Wear Evolution of Solid-Axle Wheelset with ActiveSteering (2022) ICRT 2021 - Proceedings of the 2nd International Conference on Rail Transportation,pp. 24-32.G. Baselli, G. Fiore, F. Casella, S. Cinquemani, R. Vigano, A. Pesenti, A. Zanella, A Multiple EmergencyVentilator as Backup Solution in Pandemic: A Specifically Designed and Dimensioned Device (2022)IEEE Open Journal of Engineering in Medicine and Biology, 3, pp. 41-46.F. Belelli, R. Casati, M. Vedani, Development of Al-Cu-Mg and Al-Mg-Si-Zr Alloys with Improved L-PBFProcessability (2022) Minerals, Metals and Materials Series, pp. 289-297.C. Sinigaglia, D.E. Quadrelli, A. Manzoni, F. Braghin, Fast active thermal cloaking through PDEconstrainedoptimization and reduced-order modelling (2022) Proceedings of the Royal Society A:Mathematical, Physical and Engineering Sciences, 478 (2258), art. no. 20210813.D.M. Fabris, A. Meldoli, P. Salina, R. Sala, M. Tarabini, Optimized Design and Characterization of aNon-Linear 3D Misalignment Measurement System (2022) IEEE Transactions on Instrumentation andMeasurement, 71.S. Cominelli, D.E. Quadrelli, C. Sinigaglia, F. Braghin, Design of arbitrarily shaped acoustic cloaksthrough partial differential equation-constrained optimization satisfying sonic-metamaterial designrequirements (2022) Proceedings of the Royal Society A: Mathematical, Physical and EngineeringSciences, 478 (2257), art. no. 20210750.L. Bianchi, F. Cavarzan, L. Ciampitti, M. Cremonesi, F. Grilli, P. Saccomandi, Thermophysical andmechanical properties of biological tissues as a function of temperature: a systematic literature review(2022) International Journal of Hyperthermia, 39 (1), pp. 297-340.M. Boffi, B.E.A. Piga, L. Mussone, G. Caruso, Investigating objective and perceived safety in roadmobility (2022) Transportation Research Procedia, 60, pp. 600-607.F. Borghetti, M. Longo, R., Mazzoncini, A. Panarese, C. Somaschini, Transformation of an existing urbanbus line: Milan Full Electric project (2022) Transportation Research Procedia, 60, pp. 84-91.G. Cascini, Y. Nagai, G.V. Georgiev, J. Zelaya, N. Becattini, J.F. Boujut, H. Casakin, N. Crilly, E. Dekoninck,J. Gero, A. Goel, G. Goldschmidt, M. Gonçalves, K. Grace, L. Hay, P. Le Masson, M.L. Maher, D. Marjanović,D. Motte, P. Papalambros, R. Sosa, V. Srinivasan, M. Štorga, B. Tversky, B. Yannou, A. Wodehouse,Perspectives on design creativity and innovation research: 10 years later (2022) International Journalof Design Creativity and Innovation, 10 (1), pp. 1-30.D. Yang, H.R. Karimi, L. Gelman, A Fuzzy Fusion Rotating Machinery Fault Diagnosis Framework Basedon the Enhancement Deep Convolutional Neural Networks (2022) Sensors, 22 (2), art. no. 671.F. Belelli, R. Casati, M. Vedani, Effect of Cu content on hot-crack resistance of Al-Cu-Mg alloys producedby laser powder bed fusion (2022) Philosophical Magazine Letters, 102 (3), pp. 111-119.M. Abdelwahed, R. Casati, A. Larsson, S. Petrella, S. Bengtsson, M. Vedani, On the Recycling of WaterAtomized Powder and the Effects on Properties of L-PBF Processed 4130 Low-Alloy Steel (2022)Materials, 15 (1), art. no. 336.S. Bianchi, F. Biondini, M. D’Angelo, F. Ballio, M. Anghileri, G. Rosati, G. Cazzulani, Satellite-BasedStructural and Hydraulic Monitoring of a 50-Year-Old Bridge over the Oglio River in Italy (2022) LectureNotes in Civil Engineering, 200 LNCE, pp. 380-389.S. Bianchi, F. Biondini, G. Rosati, M. Anghileri, L. Capacci, G. Cazzulani, L. Benedetti, Structural HealthMonitoring of Two Road Bridges in Como, Italy (2022) Lecture Notes in Civil Engineering, 200 LNCE,pp. 390-399.G. Zani, A. Scalbi, K.F. Ferreira, C. Somaschini, M. di Prisco, Load Testing and Structural Monitoring ofa Reinforced Concrete Mid-century Bridge (2022) Lecture Notes in Civil Engineering, 200 LNCE, pp.342-350.M.P. Limongelli, C. Gentile, F. Biondini, M. di Prisco, F. Ballio, M. Belloli, F. Resta, P. Vigo, A. Colombo, TheMoRe Guidelines for Monitoring of Transport Infrastructures (2022) Lecture Notes in Civil Engineering,200 LNCE, pp. 295-303.F. Morosi, G. Caruso, G. Cascini, Spatial Augmented Reality as a Visualization Support for EngineeringAnalysis (2022) Lecture Notes in Mechanical Engineering, pp. 103-115.M. Bertolini, M. Rossoni, G. Colombo, A Workflow for the Numerical Evaluation of Hemodynamics in aPatient-Specific AAA After Stent-Graft Implantation (2022) Lecture Notes in Mechanical Engineering,pp. 827-835.M. Zago, N.F.M. Lecis, M. Vedani, I. Cristofolini, Geometrical Issues in Design for Binder Jetting –The Effect of Anisotropic Dimensional Change on Sintering (2022) Lecture Notes in MechanicalEngineering, pp. 410-421.
N. Becattini, L. Alberio, Semi-automatic Analysis of Spoken Interaction Dynamics in CollaborativeDesign Sessions (2022) Lecture Notes in Mechanical Engineering, pp. 183-195.S. Arrigoni, F. Braghin, F. Cheli, MPC trajectory planner for autonomous driving solved by geneticalgorithm technique (2022) Vehicle System Dynamics, 60 (12), pp. 4118-4143.P. Tsiamyrtzis, M.L.G. Grasso, B.M. Colosimo, Image based statistical process monitoring via partialfirst order stochastic dominance (2022) Quality Engineering, 34 (1), pp. 96-124.L. Liu, M. Urgo, Scheduling Remanufacturing Activities for the Repair of Turbine Blades: AnApproximate Branch and Bound Approach to Minimize a Risk Measure (2022) Lecture Notes inMechanical Engineering, pp. 41-59.L. Caprio, F. Guaglione, A.G. Demir, Development of Single Point Exposure Strategy to SuppressVapour Formation During the Laser Powder Bed Fusion of Zinc and Its Alloys (2022) Lecture Notes inMechanical Engineering, pp. 107-129.M.C. Magnanini, T.A.M. Tolio, Robust Improvement Planning of Automated Multi-stage ManufacturingSystems (2022) Lecture Notes in Mechanical Engineering, pp. 61-75.S. Cacace, Q. Semeraro, Fast optimisation procedure for the selection of L-PBF parameters based onutility function (2022) Virtual and Physical Prototyping, 17 (2), pp. 125-137.M. Khayyat, S. Arrigoni, F. Cheli, Development and simulation-based testing of a 5G-Connectedintersection AEB system (2022) Vehicle System Dynamics, 60 (12), pp. 4059-4078.L. Lomazzi, F. Cadini, M. Giglio, Particle Filters and Auto-Encoders Combination for Damage Diagnosison Hysteretic Non-Linear Structures Subject to Changing Environmental Conditions (2022) ConferenceProceedings of the Society for Experimental Mechanics Series, pp. 1-13.F. Lucà, S. Manzoni, A. Cigada, Vibration-Based Damage Feature for Long-Term Structural HealthMonitoring Under Realistic Environmental and Operational Variability (2022) Structural Integrity, 21, pp.289-307.I. Alovisi, D. La Mazza, M. Longo, F. Lucà, M. Malavisi, S. Manzoni, D. Melpignano, A. Cigada, P. Darò,G. Mancini, New Sensor Nodes, Cloud, and Data Analytics: Case Studies on Large Scale SHM Systems(2022) Structural Integrity, 21, pp. 457-484.B. Aruanno, M. Covarrubias, Handy: Novel hand exoskeleton for personalized rehabilitation (2022)Computer-Aided Design and Applications, 19 (3), pp. 405-425.A. Cigada, S. Manzoni, Distributed Home Labs at the Time of the Covid (2022) Conference Proceedingsof the Society for Experimental Mechanics Series, pp. 21-28.H. Xiao, Q. Zhu, H.R. Karimi, Stability of stochastic delay switched neural networks with all unstablesubsystems: A multiple discretized Lyapunov-Krasovskii functionals method (2022) InformationSciences, 582, pp. 302-315.R. Scimone, T., Taormina, B.M. Colosimo, M. Grasso, A. Menafoglio, P. Secchi, Statistical Modeling andMonitoring of Geometrical Deviations in Complex Shapes With Application to Additive Manufacturing(2022) Technometrics, 64 (4), pp. 437-456.N. Horvat, N. Becattini, T. Martinec, S. Škec, Identifying indicators for the use of virtual prototypes indistributed design activities (2022) Computer-Aided Design and Applications, 19 (2), pp. 320-335.M. Lorusso, M. Rossoni, M. Carulli, M. Bordegoni, G. Colombo, A virtual reality application for 3Dsketching in conceptual design (2022) Computer-Aided Design and Applications, 19 (2), pp. 256-268.A. Esmaeili, C. Sbarufatti, K. Youssef, A. Jiménez-Suárez, A. Ureña, A.M.S. Hamouda, Enhanced tensilestrength, fracture toughness and piezoresistive performances of CNT based epoxy nanocompositesusing toroidal stirring assisted ultra-sonication (2022) Mechanics of Advanced Materials andStructures, 29 (26), pp. 5557-5566B.M. Colosimo, M. Grasso, F. Garghetti, B. Rossi, Complex geometries in additive manufacturing: A newsolution for lattice structure modeling and monitoring (2022) Journal of Quality Technology, 54 (4), pp.392-414M. Carulli, M. Bordegoni, E. Spadoni, Applications virtually augmenting real experiences for behavioralchange (2022) Computer-Aided Design and Applications, 19 (1), pp. 176-190K. Bourazas, D. Kiagias, P. Tsiamyrtzis, Predictive Control Charts (PCC): A Bayesian approach in onlinemonitoring of short runs (2022) Journal of Quality Technology, 54 (4), pp. 367-391M. Zhang, E. Pastore, A. Alfieri, A. Matta, Buffer allocation problem in production flow lines: A newBenders-decomposition-based exact solution approach (2022) IISE Transactions, 54 (5), pp. 421-434S. Muggiasca, S. Giappino, T., Argentini, A. Collina, A. Manenti, G. Diana, Wind Resistant Design of a VeryLarge Observation Wheel (2022) Structural Engineering International, 32 (1), pp. 8-18X. Wang, B. Liu, E. Di Gialleonardo, I. Kovacic, S. Bruni, Application of semi-active yaw dampers forthe improvement of the stability of high-speed rail vehicles: mathematical models and numericalsimulation (2022) Vehicle System Dynamics, 60 (8), pp. 2608-2635H. Yan, M. Grasso, K. Paynabar, B.M. Colosimo, Real-time detection of clustered events in video-imagingdata with applications to additive manufacturing (2022) IISE Transactions, 54 (5), pp. 464-480B. Liu, S. Bruni, Influence of individual wheel profiles on the assessment of running dynamics of a railvehicle by numerical simulation: a case study (2022) Vehicle System Dynamics, 60 (7), pp. 2393-2412E. Di Gialleonardo, M. Santelia, S. Bruni, A. Zolotas, A simple active carbody roll scheme for hydraulicallyactuated railway vehicles using internal model control (2022) ISA Transactions, 120, pp. 55-69G. Diana, E. Sabbioni, C. Somaschini, D. Tarsitano, P. Cavicchi, M. Di Mario, L. Labbadia, Full-scalederailment tests on freight wagons (2022) Vehicle System Dynamics, 60 (6), pp. 1849-1866M. Vignati, E. Sabbioni, A cooperative control strategy for yaw rate and sideslip angle control combiningtorque vectoring with rear wheel steering (2022) Vehicle System Dynamics, 60 (5), pp. 1668-1701B. Fu, S. Bruni, Comparison of wheel–rail contact models in the context of multibody system simulation:Hertzian versus non-Hertzian (2022) Vehicle System Dynamics, 60 (3), pp. 1076-1096.B. Fu, S. Hossein-Nia, S. Stichel, S. Bruni, Study on active wheelset steering from the perspective ofwheel wear evolution (2022) Vehicle System Dynamics, 60 (3), pp. 906-929B. Fu, S. Bruni, Fault-tolerant design and evaluation for a railway bogie active steering system (2022)Vehicle System Dynamics, 60 (3), pp. 810-834.D. Liu, G.M. Tomasini, F. Cheli, M. Zhong, L. Zhang, Z. Lu, Effect of aerodynamic force change causedby car-body rolling on train overturning safety under strong wind conditions (2022) Vehicle SystemDynamics, 60 (2), pp. 433-453meccanica magazine139