Meccanica Magazine n. 4

meccanica magazine
138
E. Riva, G. Castaldini, F. Braghin, Taloring edge-to-edge pumping via adiabatic transformations
and non-Hermitian shortcuts (2022) Proceedings of SPIE - The International Society for Optical
Engineering, 12043, art. no. 1204308.
G. Bianchi, S. Cinquemani, Design of a bioinspired cownose ray robot (2022) Proceedings of SPIE - The
International Society for Optical Engineering, 12041, art. no. 1204105.
F.M. Bono, S. Cinquemani, S. Chatterton, P. Pennacchi, A deep learning approach for fault detection
and RUL estimation in bearings (2022) Proceedings of SPIE - The International Society for Optical
Engineering, 12049, art. no. 1204908.
F.M. Bono, L. Radicioni, S. Cinquemani, C. Conese, M. Tarabini, Development of Soft Sensors based
on neural networks for detection of anomaly working condition in automated machinery (2022)
Proceedings of SPIE - The International Society for Optical Engineering, 12049, art. no. 1204907.
G. Bianchi, K.P.H.H. Mudiyanselage, S. Cinquemani, Design of a swimming snake robot (2022)
Proceedings of SPIE - The International Society for Optical Engineering, 12041, art. no. 120410A.
D. Milosavljevic, S. Riva, N. Lecis, S. Cinquemani, P. Bassani, Experimental validation of the Brinson
Model for Cu-based Shape Memory Alloys (2022) Proceedings of SPIE - The International Society for
Optical Engineering, 12043, art. no. 120430J.
J. Santini, E. Riva, F. Braghin, Temporal waveguiding in modulated 2D lattices (2022) Proceedings of
SPIE - The International Society for Optical Engineering, 12043, art. no. 1204307.
G. Bianchi, M. Tealdi, S. Cinquemani, Design of a bioinspired ray robot with flexible fins (2022)
Proceedings of SPIE - The International Society for Optical Engineering, 12041, art. no. 120410G.
F.M. Bono, S. Cinquemani, L. Radicioni, C. Conese, M. Tarabini, An approach for fault detection based on
multibody simulations and feature selection algorithm (2022) Proceedings of SPIE - The International
Society for Optical Engineering, 12049, art. no. 120490B.
A. Nassehi, M. Colledani, B. Kádár, E. Lutters, Daydreaming factories (2022) CIRP Annals, 71 (2), pp. 671-
692.
A. Casaroli, M. Boniardi, R. Gerosa, F. Bilo, L. Borgese, P. Cirelli, L.E. Depero, Metals release from
stainless steel knives in simulated food contact (2022) Food Additives and Contaminants: Part B
Surveillance, 15 (3), pp. 203-211.
F. Micheli, M. Bersani, S. Arrigoni, F. Braghin, F. Cheli, NMPC trajectory planner for urban autonomous
driving (2022) Vehicle System Dynamics.
F. Zanelli, E. Sabbioni, M. Carnevale, M. Mauri, D. Tarsitano, F. Castelli-Dezza, N. Debattisti, Wireless
sensor nodes for freight trains condition monitoring based on geo-localized vibration measurements
(2022) Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
E. Perez, E. Zappa, Video Motion Magnification to Improve the Accuracy of Vision-Based Vibration
Measurements (2022) IEEE Transactions on Instrumentation and Measurement, 71, art. no. 5012712.
B. Ren, T. Yin, H.R. Karimi, S. Fu, A Cargo Throughput Capacity Quantization Estimation Using Semi-
Markov Jump System Filter Within Partial State Delay (2022) Lecture Notes in Logistics, pp. 326-336.
D. Marchisotti, E. Zappa, Feasibility Study of Drone-Based 3-D Measurement of Defects in Concrete
Structures (2022) IEEE Transactions on Instrumentation and Measurement, 71, art. no. 5010711.
M. Colledani, O.E. Demir, Dynamic implementation of function-oriented selective and adaptive
assembly in small-lot production (2022) CIRP Annals, 71 (1), pp. 393-396.
P. Dahal, S. Mentasti, S. Arrigoni, F. Braghin, M. Matteucci, F. Cheli, Extended Object Tracking in
Curvilinear Road Coordinates for Autonomous Driving (2022) IEEE Transactions on Intelligent Vehicles.
S. Vieira, M. Benedek, J. Gero, S. Li, G. Cascini, Design spaces and EEG frequency band power in
constrained and open design (2022) International Journal of Design Creativity and Innovation, 10 (4),
pp. 193-221.
M.C. Magnanini, M. Mastrangelo, T.A.M. Tolio, Hybrid digital modelling of large manufacturing systems to
support continuous evolution (2022) CIRP Annals, 71 (1), pp. 389-392.
G. Carra, D. Formaggioni, M.S. Johnson, P.J. Mistry, A. Bernasconi, S. Bruni, Optimization of a Filament
Wound Hybrid Metal Composite Railway Axle Design Concept (2022) Applied Science and Engineering
Progress, 15 (2), art. no. 5791.
M. Bertolini, M. Rossoni, G. Colombo, Additive Manufacturing of a Compliant Multimaterial Heart Model
(2022) Computer-Aided Design and Applications, 19 (6), pp. 1162-1170.
A. Gabrielli, S. Mentasti, G.E. Manzoni, S. Arrigoni, F. Cheli, M. Matteucci, A Framework to Study
Autonomous Driving User Acceptance in the Wild (2022) Lecture Notes in Networks and Systems, 412
LNNS, pp. 123-140.
S. Mentasti, M. Bersani, S. Arrigoni, M. Matteucci, F. Cheli, End-to-End Learning of Autonomous Vehicle
Lateral Control via MPC Training (2022) Lecture Notes in Networks and Systems, 412 LNNS, pp. 195-211.
G. Previati, G. Mastinu, M. Gobbi, Mathematical model for farm tractors towing single axle trailer rollover
prediction (2022) International Journal of Vehicle Performance, 8 (2-3), pp. 132-146.
L. Li, Y. Chen, M. Gobbi, Preface (2022) International Journal of Vehicle Performance, 8 (2-3), pp. 129-131.
M. Vargas Hernandez, C. Mapelli, J. Cho, N. Kölbl, I. Marschall, M. Alloni, R. Carli, Neuromelt model for
estimating mold flux melting behaviour (2022) Metallurgia Italiana, 114 (1), pp. 23-31.
N. Frigerio, A. Matta, M. Rasella, Energy monitoring of manufacturing plants: A real case application
(2022) Procedia CIRP, 105, pp. 770-775.
L.T. Peiró, F. Baiguera, M.S. Crespo, M. Colledani, X.G. I Durany, Advancing in the analysis of materials in
electr(on)ic equipment (2022) Procedia CIRP, 105, pp. 261-266.
A. Loffredo, N. Frigerio, E. Lanzarone, M. Ghassempouri, A. Matta, Energy-Efficient Control of Parallel
and Identical Machines: Impact on the Overall Production System (2022) Procedia CIRP, 105, pp. 739-
744.
B. Rivolta, R. Gerosa, D. Panzeri, L. Piazza, L. Angelini, M. Alfonso, N. Bolognani, A. Panzeri, A. Parimbelli,
C. Sala, Spheroidizing annealing of thermomechanically hot-rolled steel rods: influence of the prior
microstructure on the mechanical characteristic and phase transformations (2022) Ironmaking and
Steelmaking, 49 (7), pp. 716-725.
A. Grandi, A.P. Karthikeyan, E.V. Vaz Junior, M.C. Rodriguez, Low-Cost 3D Printed Exoskeleton for Post-
Stroke Hand Rehabilitation (2022) Computer-Aided Design and Applications, 19 (6), pp. 1207-1215.
N. Rodriguez, M. Sangalli, M.D. Smukowska, M. Covarrubias, Haptic Feedback Glove for Arm
Rehabilitation
(2022) Computer-Aided Design and Applications, 19 (6), pp. 1143-1153.
E. Di Gialleonardo, A. Facchinetti, S. Bruni, Control of an integrated lateral and roll suspension for a highspeed
railway vehicle (2022) Vehicle System Dynamics.
B. Fu, S. Hossein-Nia, S. Stichel, S. Bruni, Wheel Wear Evolution of Solid-Axle Wheelset with Active
Steering (2022) ICRT 2021 - Proceedings of the 2nd International Conference on Rail Transportation,
pp. 24-32.
G. Baselli, G. Fiore, F. Casella, S. Cinquemani, R. Vigano, A. Pesenti, A. Zanella, A Multiple Emergency
Ventilator as Backup Solution in Pandemic: A Specifically Designed and Dimensioned Device (2022)
IEEE Open Journal of Engineering in Medicine and Biology, 3, pp. 41-46.
F. Belelli, R. Casati, M. Vedani, Development of Al-Cu-Mg and Al-Mg-Si-Zr Alloys with Improved L-PBF
Processability (2022) Minerals, Metals and Materials Series, pp. 289-297.
C. Sinigaglia, D.E. Quadrelli, A. Manzoni, F. Braghin, Fast active thermal cloaking through PDEconstrained
optimization and reduced-order modelling (2022) Proceedings of the Royal Society A:
Mathematical, Physical and Engineering Sciences, 478 (2258), art. no. 20210813.
D.M. Fabris, A. Meldoli, P. Salina, R. Sala, M. Tarabini, Optimized Design and Characterization of a
Non-Linear 3D Misalignment Measurement System (2022) IEEE Transactions on Instrumentation and
Measurement, 71.
S. Cominelli, D.E. Quadrelli, C. Sinigaglia, F. Braghin, Design of arbitrarily shaped acoustic cloaks
through partial differential equation-constrained optimization satisfying sonic-metamaterial design
requirements (2022) Proceedings of the Royal Society A: Mathematical, Physical and Engineering
Sciences, 478 (2257), art. no. 20210750.
L. Bianchi, F. Cavarzan, L. Ciampitti, M. Cremonesi, F. Grilli, P. Saccomandi, Thermophysical and
mechanical properties of biological tissues as a function of temperature: a systematic literature review
(2022) International Journal of Hyperthermia, 39 (1), pp. 297-340.
M. Boffi, B.E.A. Piga, L. Mussone, G. Caruso, Investigating objective and perceived safety in road
mobility (2022) Transportation Research Procedia, 60, pp. 600-607.
F. Borghetti, M. Longo, R., Mazzoncini, A. Panarese, C. Somaschini, Transformation of an existing urban
bus line: Milan Full Electric project (2022) Transportation Research Procedia, 60, pp. 84-91.
G. Cascini, Y. Nagai, G.V. Georgiev, J. Zelaya, N. Becattini, J.F. Boujut, H. Casakin, N. Crilly, E. Dekoninck,
J. Gero, A. Goel, G. Goldschmidt, M. Gonçalves, K. Grace, L. Hay, P. Le Masson, M.L. Maher, D. Marjanović,
D. Motte, P. Papalambros, R. Sosa, V. Srinivasan, M. Štorga, B. Tversky, B. Yannou, A. Wodehouse,
Perspectives on design creativity and innovation research: 10 years later (2022) International Journal
of Design Creativity and Innovation, 10 (1), pp. 1-30.
D. Yang, H.R. Karimi, L. Gelman, A Fuzzy Fusion Rotating Machinery Fault Diagnosis Framework Based
on the Enhancement Deep Convolutional Neural Networks (2022) Sensors, 22 (2), art. no. 671.
F. Belelli, R. Casati, M. Vedani, Effect of Cu content on hot-crack resistance of Al-Cu-Mg alloys produced
by laser powder bed fusion (2022) Philosophical Magazine Letters, 102 (3), pp. 111-119.
M. Abdelwahed, R. Casati, A. Larsson, S. Petrella, S. Bengtsson, M. Vedani, On the Recycling of Water
Atomized Powder and the Effects on Properties of L-PBF Processed 4130 Low-Alloy Steel (2022)
Materials, 15 (1), art. no. 336.
S. Bianchi, F. Biondini, M. D’Angelo, F. Ballio, M. Anghileri, G. Rosati, G. Cazzulani, Satellite-Based
Structural and Hydraulic Monitoring of a 50-Year-Old Bridge over the Oglio River in Italy (2022) Lecture
Notes in Civil Engineering, 200 LNCE, pp. 380-389.
S. Bianchi, F. Biondini, G. Rosati, M. Anghileri, L. Capacci, G. Cazzulani, L. Benedetti, Structural Health
Monitoring of Two Road Bridges in Como, Italy (2022) Lecture Notes in Civil Engineering, 200 LNCE,
pp. 390-399.
G. Zani, A. Scalbi, K.F. Ferreira, C. Somaschini, M. di Prisco, Load Testing and Structural Monitoring of
a Reinforced Concrete Mid-century Bridge (2022) Lecture Notes in Civil Engineering, 200 LNCE, pp.
342-350.
M.P. Limongelli, C. Gentile, F. Biondini, M. di Prisco, F. Ballio, M. Belloli, F. Resta, P. Vigo, A. Colombo, The
MoRe Guidelines for Monitoring of Transport Infrastructures (2022) Lecture Notes in Civil Engineering,
200 LNCE, pp. 295-303.
F. Morosi, G. Caruso, G. Cascini, Spatial Augmented Reality as a Visualization Support for Engineering
Analysis (2022) Lecture Notes in Mechanical Engineering, pp. 103-115.
M. Bertolini, M. Rossoni, G. Colombo, A Workflow for the Numerical Evaluation of Hemodynamics in a
Patient-Specific AAA After Stent-Graft Implantation (2022) Lecture Notes in Mechanical Engineering,
pp. 827-835.
M. Zago, N.F.M. Lecis, M. Vedani, I. Cristofolini, Geometrical Issues in Design for Binder Jetting –
The Effect of Anisotropic Dimensional Change on Sintering (2022) Lecture Notes in Mechanical
Engineering, pp. 410-421.