Meccanica Magazine n. 4

meccanica magazine
136
E.M.A. Redaelli, M. Aliverti, B. Saggin, J. Farinato, MAORY/MORFEO at ELT: Optomechanical preliminary
design (2022) Proceedings of SPIE - The International Society for Optical Engineering, 12188, art. no.
121883V
G. Filacchione (and other authors) The Integral-Field Imager and Spectrometer for planetary
exploration (ƒISPEx) (2022) Proceedings of SPIE - The International Society for Optical Engineering,
12188, art. no. 1218809
B . Fu, B. Liu, E. Di Gialleonardo, S. Bruni, Semi-active control of primary suspensions to improve ride
quality in a high-speed railway vehicle (2022) Vehicle System Dynamics
P.L. Marca, M. Tarabini, P. Lerch, A. Gabard, G. Montenero, C. Calzolaio, Numerical and Experimental
Estimation of Measurement Uncertainty in Magnetic Field Mapping (2022) IEEE Transactions on
Instrumentation and Measurement, 71, art. no. 7505210
F. Ballo, M. Gobbi, G. Mastinu, R. Palazzetti, Noise and vibration of permanent magnet synchronous
electric motors: A simplified analytical model (2022) IEEE Transactions on Transportation
Electrification, pp. 1-1
A. Orrico, S. Korganbayev, L. Bianchi, M. De Landro, P. Saccomandi, Feedback-controlled laser ablation
for cancer treatment: comparison of On-Off and PID control strategies (2022) Proceedings of the
Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2022-
July, pp. 5012-5015.
M. Pesenti, M. Gandolla, A. Pedrocchi, L. Roveda, A Backbone-Tracking Passive Exoskeleton to
Reduce the Stress on the Low-Back: Proof of Concept Study (2022) IEEE International Conference on
Rehabilitation Robotics, 2022-July
E. Bardi, E. Ambrosini, A. Pirelli, A. Pedrocchi, F. Braghin, M. Covarrubias, M. Gandolla, Upper limb
exosuit cable routing optimization (2022) IEEE International Conference on Rehabilitation Robotics,
2022-July
S.D. Gasperina, V. Longatelli, M. Panzenbeck, B. Luciani, A. Morosini, A. Piantoni, P. Tropea, F. Braghin, A.
Pedrocchi, M. Gandolla, AGREE: an upper-limb robotic platform for personalized rehabilitation, concept
and clinical study design (2022) IEEE International Conference on Rehabilitation Robotics, 2022-July
F. Borghetti, C.G. Colombo, M. Longo, R. Mazzoncini, D. Zaninelli, C. Somaschini, Innovative Freight
Trasport: Case Study on New Technologies Reliability (2022) International Conference on Electrical,
Computer, and Energy Technologies, ICECET 2022
M. Gandolla, B. Luciani, D.E. Pirovano, A. Pedrocchi, F. Braghin, A force-based human machine interface
to drive a motorized upper limb exoskeleton. a pilot study (2022) IEEE International Conference on
Rehabilitation Robotics, 2022-July
M. Gandolla, C. Mariani, L. Pozzi, M. Mancini, G.M. Foglia, A. Pedrocchi, Hand grip support for rehabilitation
and assistance: from patent to TRL5 (2022) IEEE International Conference on Rehabilitation Robotics,
2022-July
C. Sinigaglia, F. Braghin, S. Berman, Optimal Control of Velocity and Nonlocal Interactions in the Mean-
Field Kuramoto Model (2022) Proceedings of the American Control Conference, 2022-June, pp. 290-
295
E. Di Gialleonardo, S. Melzi, D. Trevisi, Freight trains for intermodal transportation: optimisation of
payload distribution for reducing longitudinal coupling forces (2022) Vehicle System Dynamics
G. Rebecchi, P.M. Calvi, A. Bussini, F. Dacarro, D. Bolognini, L. Grottoli, M. Rosti, F. Ripamonti, S. Cii,
Full-Scale Shake Table Tests of a Reinforced Concrete Building Equipped with a Novel Servo-Hydraulic
Active Mass Damper (2022) Journal of Earthquake Engineering
M. Bordegoni, M. Carulli, E. Spadoni, A Framework for Developing XR Applications Including Multiple
Sensorial Media (2022) Lecture Notes in Computer Science (including subseries Lecture Notes in
Artificial Intelligence and Lecture Notes in Bioinformatics), 13446 LNCS, pp. 271-286
A. Lo Conte, F. Bassi, S. Beretta, S. Foletti, M.E. Cristea, Life prediction of P91 piping accounting for
creep fatigue conditions (2022) Materials at High Temperatures, 39 (4), pp. 328-339
F. Rosa, G. Cazzulani, D.E. Quadrelli, R. Casati, L-PBF for the production of metallic phononic crystal:
design and functional characterization (2022) Progress in Additive Manufacturing
G. Diana (and other authors) IABSE Task Group 3.1 Benchmark Results. Numerical Full Bridge Stability
and Buffeting Simulations (2022) Structural Engineering International
M.A Soltani-Sarvestani, S. Cotin, P. Saccomandi, Unscented Kalman Filtering for Real Time
Thermometry During Laser Ablation Interventions (2022) Proceedings of the Annual International
Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2022-July, pp. 3485-3488
M. De Landro, F.L. Pietra, S.M. Pagotto, I. Porta, I. Staiano, C. Giraudeau, J. Verde, K. Ambarki, L.
Bianchi, S. Korganbayev, H. Odéen, B. Gallix, P. Saccomandi, Analysis of cavitation artifacts in Magnetic
Resonance Imaging Thermometry during laser ablation monitoring (2022) Proceedings of the Annual
International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2022-July,
pp. 5008-5011.
F. Bertozzi, A.P. Moorhead, S. Marelli, F. Stella, M. Galli, M. Tarabini, Setup and method for assessing
hand vibration and perceived discomfort during road race and gravel bike handlebars vibration (2022)
2022 IEEE International Workshop on Sport, Technology and Research, STAR 2022 - Proceedings, pp.
89-93.
B. Saggin, M.G. Naon, D. Scaccabarozzi, G. Moschioni, L. Tommasi, M. Rossi, G. Piccioni, Thermal
conductance measurement of the MAJIS insulating mountings down to cryogenic temperature
(2022) 2022 IEEE 9th International Workshop on Metrology for AeroSpace, MetroAeroSpace 2022 -
Proceedings, pp. 103-106.
I. Di Varano, F. Capaccioni, G. Filacchione, G. Rinaldi, G. Bellucci, V. Della Corte, B. Saggin, P. Valnegri,
Optical Alignment of DORA Telescope: Design and description of the laboratory setup (2022) 2022 IEEE
9th International Workshop on Metrology for AeroSpace, MetroAeroSpace 2022 - Proceedings, pp. 602-
606.
D. Scaccabarozzi, B. Saggin, M.G. Corti, S. Arrigoni, P. Valnegri, F. Dirri, C. Gisellu, E. Palomba, A.
Longobardo, E. Zampetti, Design of VISTA, a quartz crystal thermogravimetric analyzer for Hera mission
(2022) 2022 IEEE 9th International Workshop on Metrology for AeroSpace, MetroAeroSpace 2022 -
Proceedings, pp. 28-32.
B. Saggin, D. Scaccabarozzi, A. Appiani, F. Rusconi, M.G. Naon, G. Bellucci, RIIFS spectrometer
optical bench design (2022) 2022 IEEE 9th International Workshop on Metrology for AeroSpace,
MetroAeroSpace 2022 - Proceedings, pp. 107-112.
S. Arrigoni, D. Scaccabarozzi, P. Valnegri, B. Saggin, F. Capaccioni, G. Bellucci, G. Rinaldi, Design of the
optical bench for the DORA telescope (2022) 2022 IEEE 9th International Workshop on Metrology for
AeroSpace, MetroAeroSpace 2022 - Proceedings, pp. 577-581.
C. Molfese, D. Scaccabarozzi, B. Saggin, C. Popa, M.G. Naon, Smart Solar Panels project, the design
outline (2022) 2022 IEEE 9th International Workshop on Metrology for AeroSpace, MetroAeroSpace
2022 - Proceedings, pp. 23-27.
G. Mongelluzzo, G. Franzese, F. Cozzolino, F. Esposito, A.C. Ruggeri, C. Porto, A. Martin-Ortega, S.
Silvestro, C.I. Popa, D. Scaccabarozzi, B. Saggin, I. Arruego, J.R. De Mingo, F. Cortecchia, N.A. Santiuste,
D. Brienza, J.R. Abalo, CFD Analysis of the unpredicted bimodal size distribution histograms for the
ExoMars MicroMED sensor (2022) 2022 IEEE 9th International Workshop on Metrology for AeroSpace,
MetroAeroSpace 2022 - Proceedings, pp. 140-145.
D. Scaccabarozzi, B. Saggin, E.V.V. Junior, M.G. Corti, P. Valnegri, F. Esposito, F. Cozzolino, G.
Mongelluzzo, G. Franzese, C. Porto, A.C. Ruggeri, C. Molfese, D. Brienza, F. Cortecchia, A. Martin-Ortega,
I. Arruego, N.A. Santiuste, Measurement of the fluidic resistance of the MicroMED optical particle
counter (2022) 2022 IEEE 9th International Workshop on Metrology for AeroSpace, MetroAeroSpace
2022 - Proceedings, pp. 538-543.
P. Valnegri, B. Saggin, D. Scaccabarozzi, S. Arrigoni, F. Capaccioni, G. Bellucci, G. Rinaldi, DORA
telescope project: Preliminary characterization of the deployment mechanism (2022) 2022 IEEE 9th
International Workshop on Metrology for AeroSpace, MetroAeroSpace 2022 - Proceedings, pp. 550-
555.
M. De Landro, A. Orrico, A. Cariani, N. Cocca, G. Contini, L. Bianchi, D. Paloschi, S. Korganbayev, P.
Chiariotti, P. Saccomandi, Analysis of hyperspectral camera settings for assessing liver tissue thermal
damage (2022) 2022 IEEE International Symposium on Medical Measurements and Applications,
MeMeA 2022 - Conference Proceedings.
L. Bianchi, S. Asadi, M. De Landro, S. Korganbayev, P. Saccomandi, Measurement of thermal properties
of biological tissues and tissue-mimicking phantom with a dual-needle sensor (2022) 2022 IEEE
International Symposium on Medical Measurements and Applications, MeMeA 2022 - Conference
Proceedings.
V. Cimolin, I.T. Paraskevopoulos, M. Sala, M. Tarabini, M. Galli, The smart body concept as a
demonstration of the overarching utility and benefits of 3D avatars in retail, health and wellbeing: an
accuracy study of body measures from 3D reconstruction (2022) Multimedia Tools and Applications.
M.D. Landro, C. Giraudeau, J. Verde, K. Ambarki, H. Odeen, B. Gallix, P. Saccomandi, Characterization
of Susceptibility Artifacts in MR-thermometry PRFS-based during Laser Interstitial Thermal Therapy
(2022) 2022 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2022
- Conference Proceedings.
M. Pastori, F. Braghin, M.B. Quadrelli, R. Beauchamp, Modeling, Dynamics and Control of a Variable
Topology Tethered Space System (2022) IEEE Aerospace Conference Proceedings, 2022-March.
W. Zhai, S. Zhu, S. Bruni, Train and track interactions (2022) Rail Infrastructure Resilience: A Best-
Practices Handbook, pp. 161-181.
M. Shekari, A.J. Sabet, C. Guan, M. Rossi, F.A. Schreiber, L. Tanca, Personalized Context-Aware
Recommender System for Travelers (2022) CEUR Workshop Proceedings, 3194, pp. 497-504.
L. Calvanese, E. Di Gialleonardo, M. Bocciolone, Experimental characterization of the vibration effects
on wheels of a mass rapid transit vehicle (2022) Proceedings of the Institution of Mechanical Engineers,
Part F: Journal of Rail and Rapid Transit.
A. Cioffi, A.R. Asghar, P. Schito, Parameters estimation of a steady-state wind farm wake model
implemented in OpenFAST (2022) Wind Engineering.
J. Liu, N. Zhou, A. Collina, M. Carnevale, W. Zhang, An Improved Air Spring Model for Pantograph on the
High-Speed Train (2022) Lecture Notes in Mechanical Engineering, pp. 370-385.
J. Karaki, L. Faccini, E. Di Gialleonardo, C. Somaschini, M. Bocciolone, A. Collina, Continuous Monitoring
of Rail Corrugation Growth Using an In-Service Vehicle (2022) Lecture Notes in Mechanical Engineering,
pp. 158-167.
B. Fu, B. Liu, E. Di Gialleonardo, S. Alfi, S. Bruni, Improvement of High-Speed Vehicle Vertical Ride
Comfort with Semi-active Primary Suspension (2022) Lecture Notes in Mechanical Engineering, pp.
38-48.
R. Kulkarni, A. De Rosa, A. Qazizadeh, M. Berg, E. Di Gialleonardo, A. Facchinetti, S. Bruni, Monitoring of
Alignment Level (AL)and Cross Level (CL) Track Geometry Irregularities from Onboard Vehicle Dynamics
Measurements Using Probabilistic Fault Classifier (2022) Lecture Notes in Mechanical Engineering, pp.
479-487.
M. Gronle, M. Grasso, E. Granito, F. Schaal, B.M. Colosimo, Open data for open science in Industry 4.0:
In-situ monitoring of quality in additive manufacturing (2022) Journal of Quality Technology.
B. Liu, S. Bruni, Fast Computation of Wear Distribution Over Contact Patch (2022) Lecture Notes in
Mechanical Engineering, pp. 542-551.
M. Vignati, N. Debattisti, M.L. Bacci, D. Tarsitano, Validation of a Driverless Railway Vehicle Control Unit
Algorithms Through Real-Time Vehicle Simulation (2022) Lecture Notes in Mechanical Engineering, pp.
66-77.