Meccanica Magazine n. 4

meccanica magazine
132
G. Trotta, S. Cacace, Q. Semeraro, Optimizing process parameters in micro injection moulding
considering the part weight and probability of flash formation (2022) Journal of Manufacturing
Processes, 79, pp. 250-258
D. Robesti, L. Villa, P. Saccomandi, O. Traxer, A. Salonia, E. Ventimiglia, Ho: YAG laser and temperature:
is it safe to use high-power settings? (2022) World Journal of Urology, 40 (7), pp. 1891-1892
T. Simon, I. La Paglia, F. Ripamonti, R. Corradi, S. Baro, Theoretical Model for Investigating the
Structural Dynamics of a Rolling Tyre (2022) Journal of Computational and Nonlinear Dynamics, 17 (7),
art. no. 071004
S. Chatterton, P. Pennacchi, A. Vania, An Unconventional Method for the Diagnosis and Study of
Generator Rotor Thermal Bows (2022) Journal of Engineering for Gas Turbines and Power, 144 (1), art.
no. 011024
Y. Lei, F. Liu, H.R. Karimi, X. Chen, Manifold semi-supervised learning for aluminum electrolysis
temperature identification based on regularized hierarchical extreme learning machine (2022)
Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control
Engineering, 236 (6), pp. 1109-1118
E. Maleki, S. Bagherifard, S.M.J. Razavi, M. Bandini, A. Du Plessis, F. Berto, M. Guagliano, On the
efficiency of machine learning for fatigue assessment of post-processed additively manufactured
AlSi10Mg (2022) International Journal of Fatigue, 160, art. no. 106841
L. Bernini, D. Waltz, P. Albertelli, M. Monno, A novel prognostics solution for machine tool sub-units:
The hydraulic case (2022) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of
Engineering Manufacture, 236 (9), pp. 1199-1215
M. Asperti, M. Vignati, F. Braghin, Modelling of the Vertical Dynamics of an Electric Kick Scooter
(2022) IEEE Transactions on Intelligent Transportation Systems, 23 (7), pp. 9266-9274
X. Han, X. Zhao, H.R. Karimi, D. Wang, G. Zong, Adaptive Optimal Control for Unknown Constrained
Nonlinear Systems With a Novel Quasi-Model Network (2022) IEEE Transactions on Neural Networks
and Learning Systems, 33 (7), pp. 2867-2878
T.F. Ding, M.F. Ge, Z.W. Liu, Y.W. Wang, H.R. Karimi, Lag-Bipartite Formation Tracking of Networked
Robotic Systems Over Directed Matrix-Weighted Signed Graphs (2022) IEEE Transactions on
Cybernetics, 52 (7), pp. 6759-6770
August 2022
Q. Qi, W. Terkaj, M. Urgo, X. Jiang, P.J. Scott, A mathematical foundation to support bidirectional
mappings between digital models: an application of multi-scale modelling in manufacturing
(2022) Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 478
(2264), art. no. 20220156
A. Annessi, V. Zega, P. Chiariotti, M. Martarelli, P. Castellini, An innovative wide and low-frequency
bandgap metastructure for vibration isolation (2022) Journal of Applied Physics, 132 (8), art. no. 084903
H. Singh, G. Cascini, C. McComb, Idea selection in design teams: A computational framework and
insights in the presence of influencers (2022) Design Science, 8, art. no. E23
A. Fontanella, A. Facchinetti, S. Di Carlo, M. Belloli, Wind tunnel investigation of the aerodynamic
response of two 15 MW floating wind turbines (2022) Wind Energy Science, 7 (4), pp. 1711-1729
S. Korganbayev, M. De Landro, A. Wolf, D. Tosi, P. Saccomandi, Tilted Fiber Bragg Grating Measurements
During Laser Ablation of Hepatic Tissues: Quasi-Distributed Temperature Reconstruction and Cladding
Mode Resonances Analysis (2022) IEEE Sensors Journal, 22 (16), pp. 15999-16007
L. Urbiola-Soto, P. Pennacchi, Rotor Stability Effects of Tilting Pad Journal Bearings With Assembled
Clearance Asymmetry (2022) Journal of Engineering for Gas Turbines and Power, 144 (8), art. no. 081009
R. Wang, D. Ram, B. Stauder, R.F. Gutiérrez, E. Gariboldi, M.C. Poletti, Stress Relaxation during Artificial
Aging of an AlSi7Cu0.5Mg Cast Alloy (2022) Crystals, 12 (8), art. no. 1168
A. Ronca, V. Abbate, D.F. Redaelli, F.A. Storm, G. Cesaro, C. De Capitano, A. Sorrentino, G. Colombo,
P. Fraschini, L. Ambrosio, A Comparative Study for Material Selection in 3D Printing of Scoliosis Back
Brace (2022) Materials, 15 (16), art. no. 5724
D. Massocchi, M. Lattuada, S. Chatterton, P. Pennacchi, SRV Method: Lubricating Oil Screening Test for
FZG (2022) Machines, 10 (8), art. no. 621
D. Marchisotti, P. Schito, E. Zappa, 3D Measurement of Large Deformations on a Tensile Structure
during Wind Tunnel Tests Using Microsoft Kinect V2 (2022) Sensors, 22 (16), art. no. 6149
L. Wang, Y. Lu, H. Chai, G. Huang, X. Fu, X. Cao, H. Zhang, H. Wang, M. Vedani, Effect of residual tensile
stress and crystallographic structure on corrosion behavior of AZ31 Mg alloy rolled sheets (2022)
Materials Today Communications, 32, art. no. 104065
A.A. Xavier da Silva, Í.J.D. Araújo Silva, A.C.M. Miranda, A. Manes, S.C. Amico, Influence of hybridization
on the mechanical and dynamic mechanical properties of aramid/S2-glass hybrid laminates (2022)
Materials Today Communications, 32, art. no. 104021
F. Rossi, E. Marini, M. Boniardi, A. Casaroli, A.L. Bassi, A. Macrelli, C. Mele, B. Bozzini, What Happens
to MnO2 When It Comes in Contact with Zn2+? An Electrochemical Study in Aid of Zn/MnO2-Based
Rechargeable Batteries (2022) Energy Technology, 10 (8), art. no. 2200084
A. Dehghan-Manshadi, J. Venezuela, A.G. Demir, Q. Ye, M.S. Dargusch, Additively manufactured Fe-
35Mn-1Ag lattice structures for biomedical applications (2022) Journal of Manufacturing Processes,
80, pp. 642-650.
J. Dai, Z. Wu, H.R. Karimi, B. Jiang, G. Lu, An approximation lagrangian-based algorithm for the
maximum clique problem via deterministic annealing neural network (2022) Journal of the Franklin
Institute, 359 (12), pp. 6080-6098
M. Rezasefat, A. Gonzalez-Jimenez, D. Ma, A. Vescovini, L. Lomazzi, A.A.X. da Silva, S.C. Amico, A.
Manes, Experimental study on the low-velocity impact response of inter-ply S2-glass/aramid woven
fabric hybrid laminates (2022) Thin-Walled Structures, 177, art. no. 109458
S. Gao, Q. Han, Z. Jiang, X. Zhang, P. Pennacchi, F. Chu, Triboelectric based high-precision selfpowering
cage skidding sensor and application on main bearing of jet engine (2022) Nano Energy, 99,
art. no. 107387
Z. Jiang, S. Gao, Y. Kong, P. Pennacchi, F. Chu, Q. Han, Ultra-compact triboelectric bearing based on
a ribbon cage with applications for fault diagnosis of rotating machinery (2022) Nano Energy, 99, art.
no. 107263
B. Jiang, Z. Wu, H.R. Karimi, A distributed dynamic event-triggered mechanism to HMM-based observer
design for H∞ sliding mode control of Markov jump systems (2022) Automatica, 142, art. no. 110357
Y. Chen, D. Zhang, H.R. Karimi, C. Deng, W. Yin, A new deep learning framework based on blood pressure
range constraint for continuous cuffless BP estimation (2022) Neural Networks, 152, pp. 181-190
F. Ballo, P. Stabile, M. Gobbi, G. Mastinu, A Lightweight Ultra-Efficient Electric Vehicle Multi-Physics
Modeling and Driving Strategy Optimization (2022) IEEE Transactions on Vehicular Technology, 71 (8),
pp. 8089-8103
L. Bonaiti, F. Bosi, M. Mottin, C. Gorla, Tooth contact analysis of a non-involute rack and pinion system
for off-shore application (2022) Proceedings of the Institution of Mechanical Engineers, Part C: Journal
of Mechanical Engineering Science, 236 (15), pp. 8784-8794
M. Rezasefat, M. Giglio, A. Manes, Numerical Investigation of the Effect of Open Holes on the Impact
Response of CFRP Laminates (2022) Applied Composite Materials, 29 (4), pp. 1555-1578
D. Bovand, H. Abdollah-Pour, O. Mirzaee, S. Bagherifard, Effect of Ti Content on Microstructure and
Mechanical Properties of Mg-Sn Alloys Produced by Casting and Hot Extrusion (2022) Journal of
Materials Engineering and Performance, 31 (8), pp. 6835-6845
X. Huo, H.R. Karimi, X. Zhao, B. Wang, G. Zong, Adaptive-Critic Design for Decentralized Event-Triggered
Control of Constrained Nonlinear Interconnected Systems Within an Identifier-Critic Framework
(2022) IEEE Transactions on Cybernetics, 52 (8), pp. 7478-7491
September 2022
D. Kajánek, F. Pastorek, B. Hadzima, S. Bagherifard, M. Jambor, P. Belány, P. Minárik, Impact of
shot peening on corrosion performance of AZ31 magnesium alloy coated by PEO: Comparison with
conventional surface pre-treatments (2022) Surface and Coatings Technology, 446, art. no. 128773
I. Ronconi, R. Salierno, L. Liu, A. Giglio, F. Ripamonti, I. Paoletti, Numerical and Experimental Validation
of Active Vibration Control Logic Performance of a Hybrid Noise Control-Based Brick (2022) Acoustics,
4 (3), pp. 720-732
E. Gheller, S. Chatterton, A. Vania, P. Pennacchi, Squeeze Film Damper Modeling: A Comprehensive
Approach (2022) Machines, 10 (9), art. no. 781
G. Cusimano, Optimized Trapezoidal Acceleration Profiles for Minimum Settling Time of the Load
Velocity (2022) Machines, 10 (9), art. no. 767
C. Brandl, O. Brunner, P. Marzaroli, T. Hellig, L. Johnen, A. Mertens, M. Tarabini, V. Nitsch, Using realtime
feedback of L5/S1 compression force based on markerless optical motion capture to improve the
lifting technique in manual materials handling (2022) International Journal of Industrial Ergonomics,
91, art. no. 103350
A. Armillotta, Allocation of geometric tolerances in one-dimensional stackup problems (2022)
International Journal of Advanced Manufacturing Technology, 122 (3-4), pp. 1957-1973
E. Migliori, E. Mercadelli, R. Beltrami, M. Mariani, C. Baldisserri, C. Galassi, N. Lecis, Influence of
chemically synthesized powder addition on K0.5Na0.5NbO3 ceramic’s properties (2022) Journal of
Materials Science: Materials in Electronics, 33 (27), pp. 21270-21286
Y. Lei, H.R. Karimi, X. Chen, A novel self-supervised deep LSTM network for industrial temperature
prediction in aluminum processes application (2022) Neurocomputing, 502, pp. 177-185
E. Spadoni, S. Porro, M. Bordegoni, I. Arosio, L. Barbalini, M. Carulli,
Augmented Reality to Engage Visitors of Science Museums through Interactive Experiences (2022)
Heritage, 5 (3), pp. 1370-1394
B. Bozzini, S. Bagheri, M. Boniardi, L. Mancini, E. Marini, I. Sgura, C. Mele,
Quantifying and rationalizing polarization curves of Zn-air fuel-cells: A simple enabling contribution to
device-scale analysis and monitoring (2022) Electrochimica Acta, 425, art. no. 140712
S. Gao, Q. Han, N. Zhou, F. Zhang, Z. Yang, S. Chatterton, P. Pennacchi, Dynamic and wear characteristics
of self-lubricating bearing cage: effects of cage pocket shape (2022) Nonlinear Dynamics, 110 (1), pp.
177-200
F. Sausto, P.E. Carrion, N. Shamsaei, S. Beretta, Fatigue failure mechanisms for AlSi10Mg manufactured
by L-PBF under axial and torsional loads: The role of defects and residual stresses (2022) International
Journal of Fatigue, 162, art. no. 106903
D. Oboe, C. Sbarufatti, M. Giglio, Physics-based strain pre-extrapolation technique for inverse Finite
Element Method (2022) Mechanical Systems and Signal Processing, 177, art. no. 109167
A. Casaroli, M. Boniardi, R. Gerosa, B. Rivolta, How to Use Metallurgical Analysis for Fire Investigation:
The Case of AISI 316 Stainless Steel (2022) Fire Technology, 58 (5), pp. 2641-2660
N. Schulmann, M.A. Soltani-Sarvestani, M. De Landro, S. Korganbayev, S. Cotin, P. Saccomandi, Model-
Based Thermometry for Laser Ablation Procedure Using Kalman Filters and Sparse Temperature
Measurements (2022) IEEE Transactions on Biomedical Engineering, 69 (9), pp. 2839-2849