DMEC Publicationsmeccanica magazine128January 2022E. Maleki, O. Unal, M. Guagliano, S. Bagherifard, Analysing the Fatigue Behaviour and Residual StressRelaxation of Gradient Nano-Structured 316L Steel Subjected to the Shot Peening via Deep LearningApproach (2022) Metals and Materials International, 28 (1), pp. 112-131.E. Maleki, S. Bagherifard, S.M.J. Razavi, M. Riccio, M. Bandini, A. du Plessis, F. Berto, M. Guagliano,Fatigue behaviour of notched laser powder bed fusion AlSi10Mg after thermal and mechanical surfacepost-processing (2022) Materials Science and Engineering A, 829, art. no. 142145.S. Shi, Z. Fei, H.R. Karimi, H.K. Lam, Event-Triggered Control for Switched T-S Fuzzy Systems withGeneral Asynchronism (2022) IEEE Transactions on Fuzzy Systems, 30 (1), pp. 27-38.E. Maleki, S. Bagherifard, F. Sabouri, F., Bandini, M., Guagliano, Hybrid thermal, mechanical andchemical surface post-treatments for improved fatigue behavior of laser powder bed fusion AlSi10Mgnotched samples (2022) Surface and Coatings Technology, 430, art. no. 127962.S. Gao, Q. Han, N. Zhou, P. Pennacchi, F. Chu, Stability and skidding behavior of spacecraft porousoil-containing polyimide cages based on high-speed photography technology (2022) TribologyInternational, 165, art. no. 107294.Y. Lu, H.R. Karimi, Recursive fusion estimation for mobile robot localization under multiple energyharvesting sensors (2022) IET Control Theory and Applications, 16 (1), pp. 20-30.A. Bernasconi, L.M. Martulli, M. Carboni, Fatigue crack growth analysis in composite bonded joints byback face distributed strain sensing and comparison with X-ray microtomography (2022) InternationalJournal of Fatigue, 154, art. no. 106526.M. Bugatti, B.M. Colosimo, Towards real-time in-situ monitoring of hot-spot defects in L-PBF: anew classification-based method for fast video-imaging data analysis (2022) Journal of IntelligentManufacturing, 33 (1), pp. 293-309.H. Mansoori, M. Zakeri, M, Guagliano, Energy absorption and damage mechanism of UHMWPEaluminumcomposite sandwich laminate under impact loading: An experimental investigation (2022)Journal of Sandwich Structures and Materials, 24 (1), pp. 360-384.A. Gruttadauria, S. Barella, A. Guerra, Ni-Based CW6MC: Effect of the Internal Revert Recycle on theSoundness of the Alloy (2022) International Journal of Metalcasting, 16 (1), pp. 304-316.S. Dalla Gasperina, V. Longatelli, F. Braghin, A. Pedrocchi, M. Gandolla, Development andElectromyographic Validation of a Compliant Human-Robot Interaction Controller for Cooperative andPersonalized Neurorehabilitation (2022) Frontiers in Neurorobotics, 15, art. no. 734130.P. Shojaei, R. Scazzosi, M. Trabia, B. O’toole, M. Giglio, X. Zhang, Y. Liao, A. Manes, An Approachfor Material Model Identification of a Composite Coating Using Micro-Indentation and Multi-ScaleSimulations (2022) Coatings, 12 (1), art. no. 92.L. Roveda, M. Maroni, L. Mazzuchelli, L. Praolini, A.A. Shahid, G. Bucca, D. Piga, Robot End-EffectorMounted Camera Pose Optimization in Object Detection-Based Tasks (2022) Journal of Intelligent andRobotic Systems: Theory and Applications, 104 (1), art. no. 16.M. Urgo, W. Terkaj, M. Mondellini, G. Colombo, Design of serious games in engineering education:An application to the configuration and analysis of manufacturing systems (2022) CIRP Journal ofManufacturing Science and Technology, 36, pp. 172-184.G. Pomaranzi, L. Amerio, P. Schito, G. Lamberti, C. Gorlé, A. Zasso, Wind tunnel pressure data analysisfor peak cladding load estimation on a high-rise building (2022) Journal of Wind Engineering andIndustrial Aerodynamics, 220, art. no. 104855.K. Naumenko, E. Gariboldi, Experimental analysis and constitutive modeling of anisotropic creepdamage in a wrought age-hardenable Al alloy (2022) Engineering Fracture Mechanics, 259, art. no.108119.T. Argentini, D. Rocchi, C. Somaschini, U. Spinelli, F. Zanelli, A. Larsen, Aeroelastic stability of a twin-boxdeck: Comparison of different procedures to assess the effect of geometric details (2022) Journal ofWind Engineering and Industrial Aerodynamics, 220, art. no. 104878.A. De Giorgio, S. Cacace, A. Maffei, F.M. Monetti, M. Roci, M. Onori, L. Wang, Assessing the influence ofexpert video aid on assembly learning curves (2022) Journal of Manufacturing Systems, 62, pp. 263-269.S. Santoni, S.G. Gugliandolo, M. Sponchioni, D. Moscatelli, B.M. Colosimo, 3D bioprinting: current statusand trends—a guide to the literature and industrial practice (2022) Bio-Design and Manufacturing, 5(1), pp. 14-42.H.A.O. Mohamed, G. Nava, G. L’Erario, S. Traversaro, F. Bergonti, L. Fiorio, P.R. Vanteddu, F. Braghin,D. Pucci, Momentum-Based Extended Kalman Filter for Thrust Estimation on Flying Multibody Robots(2022) IEEE Robotics and Automation Letters, 7 (1), pp. 526-533.E. Brambilla, S. Giappino, G. Tomasini, Wind tunnel tests on railway vehicles in the presence ofwindbreaks: Influence of flow and geometric parameters on aerodynamic coefficients (2022) Journalof Wind Engineering and Industrial Aerodynamics, 220, art. no. 104838.F. Belelli, R. Casati, M. Vedani, J. Volpp, Design and Characterization of Al–Mg–Si–Zr Alloys withImproved Laser Powder Bed Fusion Processability (2022) Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science, 53 (1), pp. 331-343.F. Ballo, M. Carboni, G. Mastinu, G. Previati, Wires for spring construction: full scale fatigue experimentaltests (2022) Meccanica, 57 (1), pp. 213-228.M. Gavazzoni, S. Foletti, D. Pasini, Cyclic response of 3D printed metamaterials with soft cellulararchitecture: The interplay between as-built defects, material and geometric non-linearity (2022)Journal of the Mechanics and Physics of Solids, 158, art. no. 104688.P. Albertelli, V. Mussi, M. Monno, Development of generalized tool life model for constant and variablespeed turning (2022) International Journal of Advanced Manufacturing Technology, 118 (5-6), pp.1885-1901.D. Giannini, N. Aage, F. Braghin, Topology optimization of MEMS resonators with target eigenfrequenciesand modes (2022) European Journal of Mechanics, A/Solids, 91, art. no. 104352.A. Mohammadi, L. Bianchi, S. Korganbayev, M. De Landro, P. Saccomandi, Thermomechanical Modelingof Laser Ablation Therapy of Tumors: Sensitivity Analysis and Optimization of Influential Variables(2022) IEEE Transactions on Biomedical Engineering, 69 (1), pp. 302-313.A. Casaroli, M. Boniardi, R. Gerosa, B. Rivolta, Metallurgical Analysis as a Useful Method for FireInvestigation: the Case of Galvanized Steel Sheets (2022) Fire Technology, 58 (1), pp. 553-570.February 2022S. Vieira, M. Benedek, J. Gero, S. Li, G. Cascini, Brain activity in constrained and open design: Theeffect of gender on frequency bands (2022) Artificial Intelligence for Engineering Design, Analysis andManufacturing: AIEDAM, 36, art. no. E6J. Platl, S. Bodner, C., Hofer, A. Landefeld, H. Leitner, C. Turk, M.A. Nielsen, A.G. Demir, B. Previtali, J.Keckes, R. Schnitzer, Cracking mechanism in a laser powder bed fused cold-work tool steel: The roleof residual stresses, microstructure and local elemental concentrations (2022) Acta Materialia, 225,art. no. 117570F. Tessarolo, et al. Measuring breathability and bacterial filtration efficiency of face masks in thepandemic context: A round robin study with proficiency testing among non-accredited laboratories(2022) Measurement: Journal of the International Measurement Confederation, 189, art. no. 110481B. Liu, S. Bruni, R. Lewis, Numerical calculation of wear in rolling contact based on the Archardequation: Effect of contact parameters and consideration of uncertainties (2022) Wear, 490-491, art.no. 204188M. Ozdemir, J. Verlinden, G. Cascini, Design methodology for mass personalisation enabled by digitalmanufacturing (2022) Design Science, 8, art. no. E7S. Chatterton, E. Gheller, A. Vania, P. Pennacchi, P.V. Dang, Investigation of PEEK Lined Pads for Tilting-Pad Journal Bearings (2022) Machines, 10 (2), art. no. 125F.F. Semeraro, P. Schito, Numerical Investigation of the Influence of Tire Deformation and Vehicle RideHeight on the Aerodynamics of Passenger Cars (2022) Fluids, 7 (2), art. no. 47P. Parenti, D. Puccio, B.M. Colosimo, Q. Semeraro, A new solution for assessing the printability of 17-4PH gyroids produced via extrusion-based metal AM(2022) Journal of Manufacturing Processes, 74, pp.557-572A. Kanyilmaz, A.G. Demir, M. Chierici, F. Berto, L. Gardner, S.Y. Kandukuri, P. Kassabian, T. Kinoshita,A. Laurenti, I. Paoletti, A. Du Plessis, S.M.J. Razavi, Role of metal 3D printing to increase quality andresource-efficiency in the construction sector (2022) Additive Manufacturing, 50, art. no. 102541G. Mastinu, L. Solari, Electric and biomethane-fuelled urban buses: comparison of environmentalperformance of different powertrains (2022) International Journal of Life Cycle Assessment, 27 (2), pp.238-254
A. Pourheidar, L. Patriarca, M. Madia, T. Werner, S. Beretta, Progress in the measurement of the cyclicR-curve and its application to fatigue assessment(2022) Engineering Fracture Mechanics, 260, art. no. 108122R. Scazzosi, S.D. Brejão de Souza, S.C. Amico, M. Giglio, A. Manes, Experimental and numericalevaluation of the perforation resistance of multi-layered alumina/aramid fiber ballistic shield impactedby an armor piercing projectile(2022) Composites Part B: Engineering, 230, art. no. 109488A.A. Mishra, A. Momin, M. Strano, K. Rane, Implementation of viscosity and density models for improvednumerical analysis of melt flow dynamics in the nozzle during extrusion-based additive manufacturing(2022) Progress in Additive Manufacturing, 7 (1), pp. 41-54M. Freschi, M. Di Virgilio, O. Haiko, M. Mariani, L. Andena, N. Lecis, J. Kömi, G. Dotelli, Investigation ofsecond phase concentration effects on tribological and electrical properties of Cu–WS2 composites(2022) Tribology International, 166, art. no. 107357P. Mei, H.R. Karimi, S. Yang, B. Xu, C. Huang, An adaptive fuzzy sliding-mode control for regenerativebraking system of electric vehicles (2022) International Journal of Adaptive Control and SignalProcessing, 36 (2), pp. 391-410A. Abdelrahim, M. Aula, M. Iljana, T. Willms, T. Echterhof, S. Steinlechner, D. Mombelli, C. Mapelli, M.Omran, S. Preiss, T. Fabritius, Suitability of Self-Reducing and Slag-Forming Briquettes for Electric ArcFurnace Use Based on Laboratory Tests (2022) Steel Research International, 93 (2), art. no. 2100472S. Donadello, V. Furlan, A.G. Demir, B. Previtali, Interplay between powder catchment efficiency andlayer height in self-stabilized laser metal deposition (2022) Optics and Lasers in Engineering, 149, art.no. 106817E. Vasileska, M. Pacher, B. Previtali, In-line monitoring of focus shift by kerf width detection withcoaxial thermal imaging during laser cutting (2022) International Journal of Advanced ManufacturingTechnology, 118 (7-8), pp. 2587-2600M. Manzini, E. Demeulemeester, M. Urgo, A predictive–reactive approach for the sequencing ofassembly operations in an automated assembly line (2022) Robotics and Computer-IntegratedManufacturing, 73, art. no. 102201M. Rossi, P. Karamanakos, F. Castelli-Dezza, An Indirect Model Predictive Control Method for Grid-Connected Three-Level Neutral Point Clamped Converters With LCL Filters (2022) IEEE Transactionson Industry Applications, 58 (3), pp. 3750-3768K.Gunaydin, H.S. Türkmen, A. Airoldi, M. Grasso, G. Sala, A.M. Grande, Compression Behavior of EBMPrinted Auxetic Chiral Structures (2022) Materials, 15 (4), art. no. 1520G. Previati, G. Mastinu, M. Gobbi, Thermal Management of Electrified Vehicles—A Review (2022)Energies, 15 (4), art. no. 1326F. Lucà, S. Manzoni, A. Cigada, S. Barella, A. Gruttadauria, F. Cerutti, Automatic Detection of RealDamage in Operating Tie-Rods (2022) Sensors, 22 (4), art. no. 1370A. Mobili, G. Cosoli, N. Giulietti, P. Chiariotti, G. Pandarese, T. Bellezze, G.M. Revel, F. Tittarelli, Effectof Gasification Char and Recycled Carbon Fibres on the Electrical Impedance of Concrete Exposed toAccelerated Degradation (2022) Sustainability (Switzerland), 14 (3), art. no. 1775March 2022H.R. Karimi, N. Wang, Z. Man, Learning-based robust control methodologies under informationconstraints (2022) International Journal of Robust and Nonlinear Control, 32 (5), pp. 2467-2471Y.E. Wang, D. Wu, H.R. Karimi, Robust stability of switched nonlinear systems with delay and sampling(2022) International Journal of Robust and Nonlinear Control, 32 (5), pp. 2570-2584G.W. Scurati, J.W. Nylander, F. Ferrise, M. Bertoni, Sustainability awareness in engineering designthrough serious gaming (2022) Design Science, 8, art. no. e12B. Zhang, P. Wei, H. Liu, H. Yan, M. Guagliano, Effect of fine particle peening on surface integrity offlexspline in harmonic drive (2022) Surface and Coatings Technology, 433, art. no. 128133F. Lucà, M. Berardengo, S, Manzoni, M. Vanali, L. Drago, Human-structure interaction: convolutionbasedestimation of human-induced vibrations using experimental data (2022) Mechanical Systemsand Signal Processing, 167, art. no. 108511L. Colombo, M.D. Todd, C. Sbarufatti, M. Giglio, On statistical Multi-Objective optimization of sensornetworks and optimal detector derivation for structural health monitoring (2022) Mechanical Systemsand Signal Processing, 167, art. no. 108528F. Lucà, S. Manzoni, A. Cigada,L. Frate, A vibration-based approach for health monitoring of tie-rodsunder uncertain environmental conditions (2022) Mechanical Systems and Signal Processing, 167, art.no. 108547F. Ripamonti, A. Giampà, R. Giona, L. Liu, R. Corradi, Numerical and experimental study of an activecontrol logic for modifying the acoustic performance of single-layer panels (2022) Journal of Soundand Vibration, 520, art. no. 116608G. Bianchi, S. Cinquemani, P. Schito, F. Resta,A Numerical Model for the Analysis of the Locomotion ofa Cownose Ray (2022) Journal of Fluids Engineering, Transactions of the ASME, 144 (3), art. no. 031203A.A. Shahid, D. Piga, F. Braghin, L. Roveda, Continuous control actions learning and adaptation forrobotic manipulation through reinforcement learning(2022) Autonomous Robots, 46 (3), pp. 483-498Q. Lu, M. Grasso, T.P. Le, M. Seita, Predicting build density in L-PBF through in-situ analysis of surfacetopography using powder bed scanner technology (2022) Additive Manufacturing, 51, art. no. 102626E. Echaniz, R. Cordera, A. Rodriguez, S. Nogués, P. Coppola, L. Dell’Olio, Spatial and temporal variationof user satisfaction in public transport systems(2022) Transport Policy, 117, pp. 88-97G. Zong, Y. Wang, H.R. Karimi, K. Shi, Observer-based adaptive neural tracking control for a class ofnonlinear systems with prescribed performance and input dead-zone constraints (2022) NeuralNetworks, 147, pp. 126-135D. Ma, M. Giglio, A. Manes, Numerical investigation on the uniaxial compressive behaviour of an epoxyresin and a nanocomposite (2022) European Journal of Mechanics, A/Solids, 92, art. no. 104500M. Zakeri, H. Mansoori, M. Sadeghian, M. Guagliano, Impact response of fiber metal laminates basedon aluminum and UHMWPE composite: Numerical simulation (2022) Thin-Walled Structures, 172, art.no. 108796A.G. Demir, J. Kim, F. Caltanissetta, A.J. Hart, C.C. Tasan, B. Previtali, B.M. Colosimo, Enablingmulti-material gradient structure in laser powder bed fusion (2022) Journal of Materials ProcessingTechnology, 301, art. no. 117439C. Liang, C. Song, C. Zhu, F. Cadini, S. Liu, C. Xue, Computational Optimization of the Basic Data andTooth Form Parameters Based on the Contact Strength for Hypoid Gear (2022) Mechanism and MachineTheory, 169, art. no. 104657E. Maleki, S. Bagherifard, M. Guagliano, Application of artificial intelligence to optimize the processparameters effects on tensile properties of Ti-6Al-4V fabricated by laser powder-bed fusion (2022)International Journal of Mechanics and Materials in Design, 18 (1), pp. 199-222S. Gao, S. Chatterton, P. Pennacchi, Q. Han, F. Chu, Skidding and cage whirling of angular contact ballbearings: Kinematic-hertzian contact-thermal-elasto-hydrodynamic model with thermal expansionand experimental validation (2022) Mechanical Systems and Signal Processing, 166, art. no. 108427S. Turrisi, A. Cigada, E. Zappa, A cointegration-based approach for automatic anomalies detection inlarge-scale structures (2022) Mechanical Systems and Signal Processing, 166, art. no. 108483A. Gruttadauria, S. Barella, C. Mapelli, D. Mombelli, Iron Making in Fornovolasco (Italy) at the End ofthe Fifteenth Century, the Canecchio Furnace, and an Artifact Characterization (2022) HistoricalArchaeology, 56 (1), pp. 91-103H. Su, W. Qi, Y. Hu, H.R. Karimi, G. Ferrigno, E.D. Momi, An Incremental Learning Framework forHuman-Like Redundancy Optimization of Anthropomorphic Manipulators (2022) IEEE Transactions onIndustrial Informatics, 18 (3), pp. 1864-1872L. Yang, M. Gobbi, G. Mastinu, G. Previati, F. Ballo, Multi-Disciplinary Optimisation of Road VehicleChassis Subsystems † (2022) Energies, 15 (6), art. no. 2172M. Martarelli, L. Montalto, P. Chiariotti, S. Simoni, P. Castellini, G. Battista, N. Paone, AcousticAttenuation of COVID-19 Face Masks: Correlation to Fibrous Material Porosity, Mask Breathability andBacterial Filtration Efficiency (2022) Acoustics, 4 (1), pp. 123-138F. D’Errico, D., Casari, Eco-sustainable lightweight automotive part manufacturing: GHGs-free diecasting of brake leverage prototype made of AZ91D-1.5CaO magnesium alloy (2022) Metallurgia Italiana,114 (3), pp. 36-41L. Liu, M. Urgo, A Robust Scheduling Framework for Re-Manufacturing Activities of Turbine Blades(2022) Applied Sciences (Switzerland), 12 (6), art. no. 3034N. Toscani, M. Brunetti, M.S. Carmeli, F.C. Dezza, M. Mauri, Design of a Rotary Transformer forInstallations on Large Shafts (2022) Applied Sciences (Switzerland), 12 (6), art. no. 2932S. Asadi, S. Korganbayev, W. Xu, A.K. Mapanao, V. Voliani, V.P. Lehto, P. Saccomandi, ExperimentalEvaluation of Radiation Response and Thermal Properties of NPs-Loaded Tissues-Mimicking Phantoms(2022) Nanomaterials, 12 (6), art. no. 945S. Korganbayev, M. Sypabekova, A. Amantayeva, Á. González-Vila, C. Caucheteur, P. Saccomandi, D.Tosi, Optimization of Cladding Diameter for Refractive Index Sensing in Tilted Fiber Bragg Gratings(2022) Sensors, 22 (6), art. no. 2259S. Turrisi, E. Zappa, A. Cigada, Combined Use of Cointegration Analysis and Robust Outlier Statistics toImprove Damage Detection in Real-World Structures (2022) Sensors, 22 (6), art. no. 2177S.M. Tayyab, S.Chatterton, P. Pennacchi, Intelligent Defect Diagnosis of Rolling Element Bearings underVariable Operating Conditions Using Convolutional Neural Network and Order Maps (2022) Sensors, 22(5), art. no. 2026G. De Alteriis, C. Conte, E. Caputo, P. Chiariotti, D. Accardo, A. Cigada, R.S. Lo Moriello, Low-Cost andHigh-Performance Solution for Positioning and Monitoring of Large Structures (2022) Sensors, 22 (5),art. no. 1788F. Zanelli, M. Mauri, F. Castelli-Dezza, E. Sabbioni, D. Tarsitano, N. Debattisti, Energy AutonomousWireless Sensor Nodes for Freight Train Braking Systems Monitoring (2022) Sensors, 22 (5), art. no. 1876April 2022A. Ardeshiri Lordejani, L. Vitali, M. Guagliano, S. Bagherifard, Estimating deposition efficiency andchemical composition variation along thickness for cold spraying of composite feedstocks (2022)Surface and Coatings Technology, 436, art. no. 128239E. Maleki, S. Bagherifard, O.Unal, M. Bandini, M. Guagliano, The effects of microstructural and chemicalsurface gradients on fatigue performance of laser powder bed fusion AlSi10Mg (2022) Materials Scienceand Engineering A, 840, art. no. 142962meccanica magazine129