UNISAW Accessories - Delta® Power Equipment Corporation
UNISAW Accessories - Delta® Power Equipment Corporation
UNISAW Accessories - Delta® Power Equipment Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DELTA ®<br />
<strong>UNISAW</strong> ® <strong>Accessories</strong><br />
and BIESEMEYER ®<br />
products can be found on www.DeltaMachinery.com
36-201<br />
Standard & Dado<br />
Arbor Nut Assembly<br />
» For single-blade operations, an arbor<br />
nut coupled with a 5/16 in. x 2 1/2 in.<br />
dia. machined steel flange provides<br />
rigid blade stabilization<br />
» For stacked dado applications,<br />
switch to the separate arbor nut<br />
without a flange<br />
» Each features a wide knurled grip<br />
with hex-head for final tightening<br />
36-0944<br />
Standard<br />
Replacement<br />
Throat Plate<br />
78-967<br />
BIESEMEYER ®<br />
Medium and Thick<br />
Kerf Riving Knife<br />
36-055<br />
Feather Board<br />
» Universal T-track compatibility for<br />
improved cut control<br />
» Design allows stock to pass in one<br />
direction and causes resistance<br />
if moved in the other direction;<br />
preventing kickback<br />
36-805<br />
Zero Clearance<br />
Throat Plate<br />
» Designed to support the material on<br />
both sides of the saw kerf to prevent<br />
tearout<br />
» 1/2 in. thick melamine-coated solid<br />
phenolic resin blanks<br />
78-965<br />
BIESEMEYER ®<br />
Thin Kerf Riving Knife<br />
<strong>UNISAW</strong> ® <strong>Accessories</strong><br />
36-050<br />
Push Stick<br />
» Device used to push stock while<br />
keeping hands away from the blade<br />
» Designed to optimize control of your<br />
workpiece<br />
36-808<br />
Dado Throat Plate<br />
» For use with stacked dado cutters<br />
» Phenolic construction for minimal<br />
tearout<br />
34-568<br />
Clamp Attachment<br />
» Holds work securely for accurate<br />
miter and cut-off operations<br />
» For use with Model 34-928 miter gauge<br />
36-0101<br />
50-479<br />
DELTA ®<br />
and BIESEMEYER ®<br />
products can be found on www.DeltaMachinery.com<br />
Table Saw<br />
Arbor Wrench<br />
» Extra-long handle keeps your hand<br />
away while changing the blade<br />
5 in. to 4 in. Port<br />
Reducer<br />
» This fitting allows you to reduce down<br />
from a larger main line to smaller<br />
branch lines<br />
34-928<br />
Deluxe Miter Gauge<br />
» Designed with the<br />
professional in mind<br />
» Oversized grip and positive<br />
stops at all popular miter angles
78-9450<br />
BIESEMEYER ® Rear Outfeed Table<br />
» Adds an additional 4 ft. x 44 in. of work support<br />
» Compatible with any DELTA ® <strong>UNISAW</strong> ® or other DELTA ® 12 in. or 14 in. saws<br />
78-864B / 78-918B<br />
BIESEMEYER ® Universal Table Board<br />
78-864B – For the 36 in. BIESEMEYER ® Fence System<br />
Table Board L X W X H: 37 in. X 35 1/2 in. X 4 1/2 in.<br />
78-918B – For the 52 in. BIESEMEYER ® Fence System<br />
Table Board L x W x H: 52 in. x 37 in. x 4 1/2 in.<br />
» Constructed of a hardwood alder frame and laminated particle board<br />
» Laminate siding on three sides<br />
» Backer-board underside<br />
<strong>UNISAW</strong> ® <strong>Accessories</strong><br />
50-2000 / 50-257<br />
Mobile Base<br />
» Enhances mobility in the workshop<br />
» 50-2000 for use with older model <strong>UNISAW</strong> ®<br />
» 50-257 for use with 36-L352 or 36-L552 <strong>UNISAW</strong> ® models<br />
78-138B / 78-055B<br />
BIESEMEYER ® Fence Rails<br />
78-138B – For 36 in. BIESEMEYER ® Fence System<br />
78-055B – For 52 in. BIESEMEYER ® Fence System<br />
DELTA ®<br />
and BIESEMEYER ®<br />
products can be found on www.DeltaMachinery.com
78-919B<br />
BIESEMEYER ®<br />
Fence System<br />
» The most precise fence in the industry<br />
» Fence body constructed from .083<br />
gauge steel<br />
» Laminated 9-ply Birch plywood sides<br />
are durable and do not mar easily<br />
» Accurate repeatability, eliminating<br />
the need for using a hand-held tape to<br />
square and set the fence<br />
78-940<br />
BIESEMEYER ®<br />
Auxiliary Fence<br />
50-531<br />
4 in. x 20 ft. Hose<br />
34-184<br />
Premium <strong>Accessories</strong><br />
78-939<br />
BIESEMEYER ®<br />
Cut-off Fence<br />
» Quick-release clamp for fast<br />
and safe setups<br />
» Acts as a stand off to keep material<br />
away from the fence when using<br />
a miter gauge<br />
» Smooth sliding surface. The one<br />
inch dimension can be easily added<br />
when indexing the hairline on your<br />
BIESEMEYER ® fence with the scale on<br />
the system ft.s guide<br />
Universal<br />
Tenoning Jig<br />
» Has ergonomic handles, quick release<br />
coarse adjustment, micro adjustment<br />
to .004 in.<br />
» Universal miter bar for use with all<br />
table saws with<br />
» 3/8 in. x 3/4 in. miter slots<br />
50-530<br />
4 in. x 10 ft. Hose<br />
78-970<br />
BIESEMEYER ®<br />
Standard<br />
Accessory Drawer<br />
» Storage designed for the woodworker<br />
» Easily accommodates up to five saw<br />
blades, two riving knives, throat plate,<br />
push stick, wrench/ arbor nut and<br />
complete guarding assembly<br />
50-786<br />
The Perfect<br />
1.5 HP Dust Collector<br />
for the DELTA ®<br />
<strong>UNISAW</strong> ®<br />
DELTA ®<br />
and BIESEMEYER ®<br />
products can be found on www.DeltaMachinery.com
Service Part A28410<br />
Rise-and-Fall Split<br />
Guard Assembly<br />
» Tool-free split guard design allows<br />
easier line of site with the blade and<br />
work-piece<br />
Service Part A28414<br />
Anti-Kickback Pawls<br />
» Design allows stock to pass in<br />
one direction and causes resistance<br />
if moved in the other direction;<br />
preventing kickback<br />
Riving Knife Selection<br />
Service Parts<br />
ServiceNet is the Official<br />
Parts & Service Site For DELTA ® and is<br />
your one-stop for all your parts needs.<br />
www.DeltaMachinery.com/parts<br />
The riving knife supplied with the DELTA ® <strong>UNISAW</strong> ® is the correct size for the blade supplied with the saw. If a different blade is used,<br />
check the blade body, or plate, thickness and the blade kerf, or cutting width marked on the blade or on the blade packaging. The riving<br />
knife thickness must be greater than the body thickness and less than the kerf width as shown in Fig. 1. If it is not, the riving knife MUST<br />
be replaced with one that has the correct thickness. The riving knife provided with this saw is marked as follows: 2.2 mm THICK RIVING<br />
KNIFE. ONLY USE FOR 10 in. BLADE WITH 2.4 mm minimum KERF WIDTH AND 1.7 mm maximum BODY THICKNESS. (See Fig. 2) The riving<br />
knife (available as an accessory from DELTA ® ) is marked as follows: 2.8 mm THICK RIVING KNIFE. ONLY USE FOR 10 in. BLADE WITH 3.0<br />
mm minimum KERF WIDTH AND 2.5 mm.<br />
MAX. BODY THICKNESS–All DELTA ® blade body thickness and kerf widths are provided at www.DeltaMachinery.com. If a different<br />
blade is used and the body thickness and kerf width dimensions are not provided, use the following procedure to determine the correct<br />
riving knife thickness:<br />
» STEP 1: Measure the body thickness of the blade.<br />
» STEP 2: Make a shallow cut in scrap material and measure the kerf width.<br />
» STEP 3: Select the riving knife as shown in Fig. 1.<br />
» STEP 4: Slide the riving knife through the shallow cut (Fig. 3) made in step 2 to confirm the correct riving knife has been selected.<br />
The riving knife should not bind or drag through the cut.<br />
IMPORTANT NOTE: If any dragging or binding of the material is encountered as it reaches the riving knife, turn unit off and disconnect machine from power<br />
source. Repeat steps 1–4 to make the proper riving knife selection before attempting another cut.<br />
DELTA ®<br />
and BIESEMEYER ®<br />
products can be found on www.DeltaMachinery.com<br />
Copyright © 2012<br />
DELTA ® <strong>Power</strong> <strong>Equipment</strong> <strong>Corporation</strong><br />
92-393B - 03-01-2012