Installation
Installation
Installation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AUX<br />
��Outputs specific voltage levels with reference to 1/2 supply at the initiating station.<br />
��Output voltage levels on this terminal activate programmed relays on optional Auxiliary Output<br />
boards.<br />
��Aux output voltage levels are identical to VLC output levels with reference to the particular<br />
button pressed.<br />
BATT (at Master Station)<br />
��Terminals for connecting battery (for Secure Master only).<br />
13.8V IP (at Master Station)<br />
��Terminals for connecting power supply or plugpack.<br />
13.8V OP (at Master Station)<br />
��Terminals for powering auxiliary 13.8V devices.<br />
Load Res (at Master Station)<br />
��Terminals for fitting alternative value of load resistor - only used when system fitted with VR101<br />
Room Stations or VF101 Door Stations - track must be cut to disable on-board load resistor.<br />
FM (at Master Station)<br />
��Terminals for connection of FM antenna.<br />
AM (at Master Station)<br />
��Terminals for connection of AM antenna.<br />
NOTE: Ensure that the coax centre core goes to the left AM terminal and the coax outer shield<br />
goes to the right AM terminal.<br />
STR – (at Master)<br />
��For connection of strobe light negative (for Secure Master only).<br />
STR + (at Master)<br />
��For connection of strobe light positive (for Secure Master only).<br />
SIR – (at Master)<br />
��For connection of horn speaker negative (for Secure Master only).<br />
SIR + (at Master)<br />
��For connection of horn speaker positive (for Secure Master only).<br />
TAMP 3K3 (at Master)<br />
��For connection to siren cover tamper switch with 3K3 end of line resistor (for Secure Master only).<br />
88