Installation
Installation
Installation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BRICK CAVITY WALL<br />
Remove bricks and install wall box.<br />
For homes under construction, install wall box as brickwork is going up.<br />
Wall Box for Master Station – Cavity Brick Wall<br />
Brickwork cutout size<br />
365 x 295 mm (H x W)<br />
Cables<br />
Timber Frame Wall Box<br />
FITTING MASTER BACK HOUSING AND ASSOCIATED BRACKETS<br />
Pull the cables through the wall box.<br />
Unplug all the wiring looms from the Master connection PCB so the Master Front and Back<br />
Case can be separated.<br />
Break off the appropriate number of cable entry tabs from the Master termination PCB.<br />
Fit the Master Back Housing into the wall and pull all the cables through the Back Case via<br />
the space provided by the removed cable entry tabs.<br />
Position the top metal mounting bracket for the front fascia on the top edge of the Back<br />
Case and screw to the wall box.<br />
Position the bottom metal mounting bracket on the bottom edge of the Back Case and<br />
screw to the wall box.<br />
For the Secure Master (VM102-S) only, assemble the tamper switch, tamper bracket and<br />
tamper lead, and fit to the right hole on the bottom metal mounting bracket.<br />
11