Installation
Installation
Installation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INSTALLATION OF MASTER STATION<br />
TIMBER FRAME WALL NOT YET LINED<br />
Install the Master wall box flush with the front of the stud and brace it so as to limit any<br />
movement of the box when fitting the Master Station.<br />
After the wall has been lined, cut out an opening to the inside dimensions of the wall box.<br />
Wall Box for Master Station – Timber Frame Wall<br />
Wall Lining Cutout Size<br />
= Inside Measurements of Wall Box<br />
325 x 270 mm (H x W)<br />
TIMBER FRAME WALL ALREADY LINED<br />
Cables<br />
Wall Stud<br />
Timber Frame Wall Box<br />
Cut out an opening in the wall lining (H 325mm x W 270mm) 12mm away from a wall stud.<br />
Slide the Master wall box in side ways, then straighten it up and firmly nail it to the stud so<br />
that it is flush with the front of the stud.<br />
10