Automotive Electrical and Electronic Systems Classroom Manual Fifth Edition Update by John F. Kershaw

www.TechnicalBooksPDF.com
Tools, Fasteners, and Safety 5
Tool chest
1/4-inch drive socket set (1/4 in. to 9/16 in. Standard
and deep sockets; 6 mm to 15 mm standard
and deep sockets)
1/4-inch drive ratchet
1/4-inch drive 2-inch extension
1/4-inch drive 6-inch extension
1/4-inch drive handle
3/8-inch drive socket set (3/8 in. to 7/8 in. standard
and deep sockets; 10 mm to 19 mm standard
and deep sockets)
3/8-inch drive Torx set (T40, T45, T50, and T55)
3/8-inch drive 13/16-inch plug socket
3/8-inch drive 5/8-inch plug socket
3/8-inch drive ratchet
3/8-inch drive 1 1/2-inch extension
3/8-inch drive 3-inch extension
3/8-inch drive 6-inch extension
3/8-inch drive 18-inch extension
3/8-inch drive universal
3/8-inch drive socket set (1/2 in. to 1 in. standard
and deep sockets)
1/2-inch drive ratchet
1/2-inch drive breaker bar
1/2-inch drive 5-inch extension
1/2-inch drive 10-inch extension
3/8-inch to 1/4-inch adapter
1/2-inch to 3/8-inch adapter
3/8-inch to 1/2-inch adapter
Crowfoot set (frictional inch)
Crowfoot set (metric)
3/8- through 1-inch combination wrench set
10 millimeters through 19 millimeters combination
wrench set
1/16-inch through 1/4-inch hex wrench set
2 millimeters through 12 millimeters hex wrench set
3/8-inch hex socket
13 millimeters to 14 millimeters flare nut wrench
15 millimeters to 17 millimeters flare nut wrench
5/16-inch to 3/8-inch flare nut wrench
7/16-inch to 1/2-inch flare nut wrench
1/2-inch to 9/16-inch flare nut wrench
Diagonal pliers
Needle pliers
Adjustable-jaw pliers
Locking pliers
Snap-ring pliers
Stripping or crimping pliers
Ball-peen hammer
Rubber hammer
Dead-blow hammer
Five-piece standard screwdriver set
Four-piece Phillips screwdriver set
#15 Torx screwdriver
#20 Torx screwdriver
Awl
Mill file
Center punch
Pin punches (assorted sizes)
Chisel
Utility knife
Valve core tool
Filter wrench (large filters)
Filter wrench (smaller filters)
Safety glasses
Circuit tester
Feeler gauge
Scraper
Pinch bar
Sticker knife
Magnet
Figure 1-10. Flare-nut wrench. Also known as a line wrench, fitting wrench, or tube-nut
wrench. This style of wrench is designed to grasp most of the flats of a six-sided (hex) tubing
fitting to provide the most grip without damage to the fitting.