Oil and Gas Magazine - Chemical Engineering Masters Ultimate Guide - GineersNow
Chemical engineering is an important field that helps to create many essential products and materials. A master's program in chemical engineering can provide students with advanced knowledge and skills in the field. There are many advantages to pursuing a chemical engineering master's degree, including the potential for higher salaries, increased job opportunities, and the ability to work in a variety of industries. Students who complete a chemical engineering master's degree can be well-prepared for exciting and rewarding careers. What Is Chemical Engineering? Chemical engineering is the study of how to turn raw materials into products that are useful to society. It is a branch of engineering that deals with the design, construction, and operation of machines and plants that perform chemical reactions to produce products such as drugs, fuels, and plastics. A typical chemical engineering curriculum includes courses in chemistry, physics, mathematics, and thermodynamics. Students also take courses in transport phenomena, process control, and kinetics. In addition to coursework, students must complete a research project or an internship before they can graduate. Those who complete a chemical engineering program typically go on to work in the oil and gas industry, the pharmaceutical industry, or the food and beverage industry. Some also choose to pursue careers in academia or government.
Chemical engineering is an important field that helps to create many essential products and materials. A master's program in chemical engineering can provide students with advanced knowledge and skills in the field. There are many advantages to pursuing a chemical engineering master's degree, including the potential for higher salaries, increased job opportunities, and the ability to work in a variety of industries. Students who complete a chemical engineering master's degree can be well-prepared for exciting and rewarding careers.
What Is Chemical Engineering?
Chemical engineering is the study of how to turn raw materials into products that are useful to society. It is a branch of engineering that deals with the design, construction, and operation of machines and plants that perform chemical reactions to produce products such as drugs, fuels, and plastics.
A typical chemical engineering curriculum includes courses in chemistry, physics, mathematics, and thermodynamics. Students also take courses in transport phenomena, process control, and kinetics. In addition to coursework, students must complete a research project or an internship before they can graduate.
Those who complete a chemical engineering program typically go on to work in the oil and gas industry, the pharmaceutical industry, or the food and beverage industry. Some also choose to pursue careers in academia or government.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SEPTEMBER 2022
N E W S
Introduction of SIMULSO
SL 7G Hydrotope
Surfactant ...
Advantages &
Drawbacks of Overhead
Gantry Crane
Read this before hiring
a marine service
60 64 68
HARD WORK
MADE EASY.
When you want to get more work done with less effort, John Deere’s 624K Wheel Loader delivers the smooth,
effortless control you’re looking for. It boasts excavator-style load-sensing hydraulics for more efficient combined
functions and faster work cycles. And, its PowerShift transmission continuously evaluates speed and load
conditions, adjusting clutch-pack engagement to maximize your productivity.
Best of all, these machines are backed by Brandt; the best-trained and most committed 24/7 after-sales support
team in the business. That’s Powerful Value. Delivered.
NEED FAST, FLEXIBLE FINANCING? WE DELIVER.
Call TOLL FREE: 1-855-711-4545
or visit brandtfinance.com
brandt.ca 1-888-227-2638
2
E D I T O R ‘ S N O T E
A
c h e m i c a l
engineering master’s
degree is a postgraduate-level
degree that builds upon the
knowledge and skills learned
in an undergraduate degree
program. The master’s degree
program provides advanced
training in the field of chemical
engineering, including courses
in thermodynamics, reaction
kinetics, process design, and
transportation phenomena.
The goal of the chemical
engineering masters is to
prepare students for careers in
industry or academia.
The advantages of a
chemical engineering
masters
There are many advantages to
completing a master’s course
in chemical engineering.
Firstly, it provides students
with advanced knowledge and
skills in the field of chemical
engineering. This can lead to
improved career prospects
and higher salaries.
Secondly, a master’s course
can allow students to specialize
in a particular area of chemical
engineering’s, such as
environmental engineering or
process engineering. This can
make them more attractive to
Chemical Engineering
Master’s Degree: Is It
potential employers.
Finally, completing a chemical
engineering masters can give
students the opportunity to gain
valuable research experience,
which can be helpful in securing
a job after graduation.
The job market for
chemical engineers
As the world becomes
increasingly reliant on
technology, the demand for
chemical engineers is expected
to grow. A masters in chemical
engineering can give you the
skills you need to enter this field.
Chemical engineering masters
is the study of how chemicals
can be used to create new
products or process materials.
for You?
It is a branch of engineering
that combines chemistry and
physics principles with math
and economics. A career in
chemical engineering can
be very rewarding. Chemical
engineers are responsible for
developing and improving
processes that turn raw
materials into useful products.
They often work in
manufacturing, but they can
also be found in other industries
such as healthcare, food and
beverage, and environmental
protection.
Career opportunities:
what can you do with a
chemical engineering
master’s?
4
E D I T O R ‘ S N O T E
A chemical engineering masters can open up a variety of career opportunities. With a master’s
degree in chemical engineering, you can work in a variety of industries, including the pharmaceutical
industry, the cosmetics industry, the food and beverage industry, and the petrochemical industry.
You can also work in research and development or in management and consulting. With a chemical
engineering masters, you will have the skills and knowledge to design and develop new products
and processes. You will also be able to troubleshoot existing products and processes. In addition,
you will be able to manage projects, teams, and budgets.
Chemical engineers with master’s degrees are in high demand, and they command high salaries.
If you are interested in a rewarding career that offers good job security and high earnings potential,
then a career in chemical engineering may be for you.
Conclusion: is a chemical engineering masters course right for you?
If you’re considering a chemical engineering master’s degree, there are a few things you should
keep in mind. First, what are your career goals? A master’s degree in chemical engineering can
open up many doors, but it’s important to have a clear idea of what you want to do with your degree
before you commit to the program.
Second, consider the time and financial commitment required for a master’s degree. If you’re not
sure you’re ready to make that kind of commitment, a bachelor’s degree in chemical engineering
may be a better option.
Finally, think about your learning style and whether or not you thrive in an environment where you’re
constantly challenged. If you’re the type of person who likes to be pushed outside of your comfort
zone, a chemical engineering master’s degree program may be right for you.
C O N T E N T S
8
Keep Your Home Spotless with
these Twelve Cleaning ...
28
Lg Launches New Virtual
Platform For Air Solution ...
32
Chemical Engineering Master’s
Degree: Ultimate Guide
v
72
The 4 Areas of Your
Engineering Business ...
80
Four Common Payroll Pitfalls in
Engineering Business
84
What to Expect from an
Engineering ...
60
Introduction of SIMULSO SL
7G Hydrotope ...
88
The Most Important Features
Your Engineering ...
64
Advantages & Drawbacks of
Overhead Gantry Crane
92
4 Grant Management Benefits
for Engineering ...
68
Read this before hiring a
marine service
96
Do You Have What It Takes To
Be A Chemical Engineer?
6
FEATURE STORY
Keep Your Home Spotless with
these Twelve Cleaning Tools and
Equipment
Cleaning our homes has many benefits, especially
for our health. Having a tidy space improves both
our mental and physical health as it prevents us
from illnesses and reduces our stress and feelings of
anxiety. So, if you are planning on doing a house clean
up but don’t have the right tools and equipment, don’t
worry! CBK (Co Ban Kiat) Hardware has what you
need, so read on.
1. NILFISK WET & DRY VACUUM
CLEANER 12 LITERS BUDDY
The Nilfisk vacuum cleaner is unlike
a typical vacuum cleaner as it not
only sucks up dust and dirt, but also
removes damp dirt, water, and other
liquids. Cleaning both wet and dry
surfaces with this cleaning equipment
is possible. Additionally, this small
lightweight yet powerful vacuum
cleaner is also ideal for tidying your
car up.
Click here to purchase directly from
their online store.
8
2. 3M 1056 SCOTCH BRITE
MOP WIDE CLEANING 50
INCHES
Looking for a mop that can cover
a larger surface area and save you
from moping time? Try this Scotch
Brite mop, which is totally free of lint
and frayed ends so you don’t need to
worry if some lint would be left behind
after every wipe. You can use this
wide-cleaning mop on most floors,
such as hardwood, vinyl, ceramic,
laminate, and linoleum.
Click here to purchase directly from
their online store.
3. 3M SCOTCH BRITE WALIS
TIBAY
Are you on search for a high-quality
broom? Here’s the Scotch Brite Walis
Tibay, made from durable materials
that it can last long. It is also made
from lightweight materials that you can
carry around and clean small corners
or dusting off fabric furnishing.
As organizing your cleaning tool is
difficult, you can hang the string of the
Scotch Brite Walis Tibay on the wall.
Click here to purchase directly from
their online store.
9
Saving
lives
every day
Part of Blue Ocean Robotics
FEATURE STORY
4. 3M SINGLE BUCKET
SPINMOP
Having trouble to get rid of dirt or
dust from the corners of your home?
We have the right solution for you -
the 3M Single-Bucket Spin Mop. This
lightweight and durable mop has a
100% microfiber mop head that can
soak up water, as well as trap dust. It
comes with a bucket, where you can
spin, dry, and wash the mop.
On top of that, its mop head can rotate
360 degrees, making it ideal for
cleaning corners and other hard-toreach
areas. It is suitable for mirrors
and all hard floor surfaces like wood,
glass, granite, and laminate.
5. NILFISK LOW-SPEED FLOOR
POLISHER SINGLE DISC 17” 50-
60 HZ 1800W
Click here to purchase directly from
their online store.
Want to keep your floor shiny? With the
Nilfisk Low-Speed Floor Polisher, you
can effortlessly polish your floor as its
easy-to-use controls guarantee simple
operation. Complete with a water tank,
a brush, and a pad holder, this floor
polisher gently scrubs the floor and
makes it look new.
The Nilfisk Low-Speed Floor Polisher
features an aluminum base and triple
planetary gearbox, and reducing the
sound of the motor and gears. Another
convenient feature is that you can easily
turn it off by putting the handle in a
90-degree vertical position.
Click here to purchase directly from
their online store.
12
6. 3M 7038 UTILITY CLEAN
CLOTH 3-IN-1 32X30CM
When it comes to cleaning, many
of us make use of cloth, especially
when wiping tables, glass windows,
and other flat surfaces. This 3M Utility
Clean Cloth is highly absorbent,
soaking up to 50% more than regular
cotton dishcloths. Dries off quickly
so you won’t have to wait longer than
usual. The 3M Utility Clean Cloth is
a 3-in-1 pack perfect for your daily
cleaning task.
Click here to purchase directly from
their online store.
7. 3M 1024 SCOTCH BRITE
GLOVES OUTDOOR HEAVY
DUTY MEDIUM 8-8.5 IN
We normally use our hands in picking
up the trash or simple wiping off
crumbs on the table. However, there
are certain task that we need to protect
our hands with a heavy duty
gloves while cleaning especially when
using strong cleaning chemicals and
detergents.
The 3M Scotch Brite Heavy Duty
Gloves are made with 100% rubber
material than normal household gloves
in the market and especially made
for tough cleaning that will make your
hands safe as you clean. Moreover, it
has a cotton lining that absorbs sweat
and has a lemon scent that gives a
pleasant smell.
Click here to purchase directly from
their online store.
13
FEATURE STORY
8. 3M 1004 SCOTCH BRITE
SCRUB PAD HEAVY DUTY
THRIFTPACK 3PC 95X150MM
When cleaning up the kitchen, it’s important
not to miss washing the cooking
utensils to prevent bacteria from
sticking to them and growing. The 3M
Scotch Brite Heavy Duty Scrub Pad
will make your pans, cast-iron pots,
stove burners, grills, and stainless
steel spotless and non-greasy after
you wash.
This heavy-duty scrub pad can clean
tricky, hardened mess 50% faster
than other products. Apart from cookware,
you can also use them in cleaning
garden tools and other things
or surfaces with baked-on dirt. One
pack already contains three pads.
Click here to purchase directly from
their online store.
9. INTERDESIGN BOWL BRUSH
FORMA BRIZO 16.5 BRUSHED
STAINLESS STEEL
Looking for a contemporary bowl
brush to add style to your bathroom?
Get yourself an Interdesign Bowl Brush
Forma Brizo, made from stainless steel
that can complement any style. Also,
with its 16.5 inches tall handle, it can
help you thoroughly clean the interior
parts of the toilet and prevent water
from splashing.
Click here to purchase directly from
their online store.
10. 3M 7074 LEATHER & VINYL
RESTORER 16 OZ
Have dirty leather sofas and don’t know
how to remove those spots? 3M Leather &
Vinyl Restorer will help you make your sofa
spotless again. This product can remove
dirt and grime even from deep within the
sofa or other furniture. Especially formulated
for vinyl, leather, rubber, and plastic
surfaces.
Moreover, this leather and vinyl restorer
promises to improve the appearance of the
surface by bringing back its natural sheen.
Use the fresh lemon scent variant that will
leave your sofa smells good after cleaning.
Click here to purchase directly from their
online store.
11. WESTINGHOUSE STAR GLO-
RY HANDY VACUUM CLEANER
600W BLUE/WHITE
If you prefer a lighter vacuum cleaner,
Westinghouse Star Glory Handy Vacuum
Cleaner is one of your top choices.
This product weighs only 2.3 kg and its
accessories are easily detachable so
you won’t have any problem removing
the dust from the dust tank. Also, it has
a transparent dust tank that will help
you determine if the dust tank if full
and need to empty it.
This handy vacuum cleaner comes
with a washable HEPA filter, as well
as a crevice nozzle and a bed brush,
which can clean any place smoothly.
On top of that, it is a bagless vacuum
cleaner, which makes it a more environmentally
friendly option.
Click here to purchase directly from
their online store.
www.infrastructurenews.co.za
IMESA
The official magazine
of the Institute
of Municipal Engineering
of Southern Africa
infrastructure development • maintenance • service delivery
Mather+Platt
Proudly
South African
pumps
Green Buildings
Sustainability is not an option
Asphalt Technology
Putting RA to work
ISSN 0257 1978
Volume 44 No. 7 • July 2019 • R55.00 (incl. VAT)
Disrupting the energy sector with a customer-centric approach
www.energydigital.com AUGUST 2019
SHAPING THE FUTURE
SUPPLY CHAIN
PETRO RABIGH
Supply chain
transformation in
Saudi Arabia
EMBRACING THE
DISRUPTION ERA
Shell Lubricants has
ripped up the supply chain
management rulebook
Energy sector
CEOs
FEATURE STORY
12. SHOPVAC MICRO 4
SHOPVAC MICRO 4 is an excellent
vacuum cleaner. You can use this all
around the house to eliminate dust,
dirt, and residue on carpets, canvas
sofas, throw pillows, stairs, kitchen,
or anywhere you have a wet or dry
mess. This product may be small but
it has enough power to suck up every
little thing on its way.
Click here to purchase directly from
their online store.
Make your home spotless and squeaky clean with these cleaning
tools and equipment from CBK Hardware that guarantees a clean
home for you and your family. So don’t hesitate to buy them for your
next house cleanup. You can visit https://shop.cbkhardware.com/ for
more products.
2018-2019
LNG promises a new future for B.C. energy development
TransCanada’s Coastal GasLink Pipeline
project makes steady progress
Business is booming in northwest B.C.
SERVING MANITOBA’S OIL & GAS INDUSTRY
MANITOBA
2018
Oil & Gas Review
looking up:
Manitoba’s oil industry continues to rebound froM 2016 downturn
econoMic iMpacts of the
Manitoba oil industry on
the u.s. econoMy
Manitoba
industry
overview and stats
ptrc building on past
successes to take bakken
research to the field
FEATURE STORY
Co Ban Kiat Hardware, Inc.
Ground Floor, Cobankiat Building II
231 Juan Luna St. Binondo Manila, Philippines.
Phone +632 8243-1931
Phone +632 8242-6925
Phone +632 8894-6561 & +638-272-931-981
Email info@cobankiat.com.ph;
ind@cobankiat.com.ph
Coby’s Design Center
Unit 467 level 4 Shangri-La Plaza
Edsa Corner Shaw Boulevard
Mandaluyong City, Philippines
Phone +632 86364895
Where to Buy?
For over 100 years, Co Ban Kiat Hardware Inc. has been the most trusted distributor of
home improvement and hardware items in the Philippines.
#StayAtHome and conveniently shop and order online!
Visit us on the following sites and enjoy deals, discounts, and more!
Lazada Store:
Website: https://shop.cbkhardware.com/
Facebook: https://www.facebook.com/cbkhardware/
Instagram: http://www.instagram.com/cbkhardware
Join our Fast-Growing Viber Community https://bit.ly/39Lngjg
24
About CBK Hardware
For over one hundred years, a family’s surname has become synonymous with the country’s
biggest hardware supply company. Co Ban Kiat Hardware Incorporated of the Cobankiat family
has a regular client network of more than 1,500 industrial organizations, 1,600 traditional
community hardware stores, and 584 home building specialty chains of stores across Luzon
Visayas and Mindanao. This ever-growing conglomerate traces its humble roots to Manila
Chinatown, as a pioneer enterprise started by the family’s patriarch, Mr. Cobankiat, in 1920.
Despite the ruins of World War II, the business got back to its feet in 1948, rebuilding a storefront
from the very same spot where it was known for three decades.
While the Filipinos continued to rebuild their lives post-war, CBK Hardware saw the opportunity
to introduce the retail concept once unheard of in the hardware industry. Cobankiat Hardware
brought the first DIY business in Asia. The Hardware Workshop Store is the fruit of this endeavor.
CBK Hardware further cemented its legendary distribution channel with the creation of Coby’
Design Center in Edsa Shangri La in 1996, a specialty store that caters to the discriminating taste
of modern Filipinos.
In 1997, Mr. Johnny Cobankiat, the 4th generation Cobankiat leader, set another milestone for
the company when he brought the franchise of Ace Hardware USA to the Philippines and signed
up CBK Hardware as one of its major suppliers. This further expanded into delivering quality
world-class products nearer to families of Filipino overseas workers in the countryside.
A century’s excellence can quickly pass, and guided by the vision to be the largest network
supplier of the biggest global brands in the hardware industry, CBK Hardware resolves to source
the best products to supply its customers anytime and every time.
25
FEATURE STORY
LG Launches New Virtual
Platform For Air Solution
Technology
The LG HVAC Virtual Experience Provides Visitors with the Opportunity to Explore a Wide Range of
Residential and Commercial Solutions
As consumers and business have looked to online recourses to help influencer their purchase
decision, virtual experiences have become a key trend. In light of this, LG Electronics
(LG) Home Appliance & Air Solution Company has opened a new online showroom,
LG HVAC Virtual Experience. Utilizing the latest in digital technology, this interactive
online showroom lets visitors get to know LG’s diverse range of residential and commercial indoor
environmental solutions from the comfort and safety of their homes.
The showroom delivers an intuitive, virtual experience that lets visitors view the compa-ny’s latest
solutions in a variety of virtual environments to learn about the benefits they provide, such as greater
comfort, improved indoor air quality and seamless control, all important in helping customers make
informed and important decisions for the family or employees.
28
Upon entering LG HVAC Virtual Experience, visitors can choose from a range of busi-ness and living
space categories: Residential Apartment, Residential Villa, Office Gen-eral, Office High-Rise, Retail
and Hotel. Customers can roam the 3D environments freely using their mouse or touchscreen. Menus
offer additional information on every model, including specifications, features, product videos and case
studies. Simple to use and navigate, LG’s new virtual platform is a great tool for consumers, industry
profes-sionals and partners looking to create healthier and more comfortable indoor spaces.
What’s more, the virtual showroom allows visitors to see the behind-the-scenes details and technologies.
Press the onscreen Airflow and Piping buttons to see how air travels in an air conditioner or air purifier
and how pipes direct water and refrigerant through a system. Virtually switch operational modes and
observe how airflow changes from one air conditioner to another. Beyond the technology and science,
the showroom is also a great place to check out all the products’ stylish designs to see how they match
various virtual interiors.
LG HVAC Virtual Experience is an open, engaging online resource that will give visi-tors a thorough
understanding of LG’s latest, optimized HVAC solutions for all kinds of spaces, helping them figure out
which products are best suited to their specific needs.
Visit LG Virtual HVAC Experience to discover the company’s latest indoor environ-mental comfort
technologies on your PC or smartphone.
About LG Electronics Home Appliance & Air Solution Company
The LG Home Appliance & Air Solution Company is a global leader in home appliances, smart home
solutions, air quality systems as well as visionary products featuring artificial intelligence. The company
is creating total solutions for the home with its industry leading core technologies and is committed
to making life better for consumers around the world by developing thoughtfully designed kitchen
appliances, living appliances and air solution products. Together, these products deliver enhanced
convenience, superb performance, efficient operation and compelling health benefits. For more
information, visit www.LG.com.
29
Feel the Force of HYDRA!
FANG Shaped Cutter Technology
Optimized Hydraulics
Premium Performance
The Future of
Reclamation Monitoring
Interactive map of surface water depth. Users
can click on any point to query depth.
The Environmental Footprint Monitoring Platform is ideal for managing oil and gas reclamation activities.
It uses very-high-resolution satellite imagery to identify areas of interest and focus ground testing where
it is needed most. Archival imagery allows the user to look back at the history of environmental health
iand results are delivered through an online portal, accessible at anytime. For more information, visit:
www.footprintmonitoring.com
Proven Experience. Trustred Expertise. Innovative Solutions.
Saskatoon - Regina - Shaunavon - Calgary - St. Albert - Grand Prairie - Winnipeg - Thunder Bay
www.westernheritage.ca 1-306-975-3860 info@westernheritage.ca
Chemical engineering is an important field that helps to
create many essential products and materials. A master’s
program in chemical engineering can provide students with
advanced knowledge and skills in the field. There are many
advantages to pursuing a chemical engineering masters, including
the potential for higher salaries, increased job opportunities, and
the ability to work in a variety of industries. Students who complete a
chemical engineering masters can be well-prepared for exciting and
rewarding careers.
32
33
C O V E R
S T O R Y
What is chemical engineering?
Chemical engineering is the study of how
to turn raw materials into products that are
useful to society. It is a branch of engineering
that deals with the design, construction, and
operation of machines and plants that perform
chemical reactions to produce products such
as drugs, fuels, and plastics.
A typical chemical engineering curriculum
includes courses in chemistry, physics,
mathematics, and thermodynamics. Students
also take courses in transport phenomena,
process control, and kinetics. In addition
to coursework, students must complete a
research project or an internship before they
can graduate.
Those who complete a chemical engineering
program typically go on to work in the oil and
gas industry, the pharmaceutical industry, or
the food and beverage industry. Some also
choose to pursue careers in academia or
government.
The advantages of a chemical
engineering masters
There are many advantages to pursuing a
chemical engineering masters degree. For one,
the field of chemical engineering is constantly
evolving, and a master’s degree will give you
the latest knowledge and skills.
Additionally, a master’s degree will make you
more marketable to employers and could lead
to higher earnings.
Finally, completing a master’s degree may
give you an edge over other candidates when
applying for jobs or promotions.
The benefits of studying chemical
engineering masters
A master’s degree in chemical engineering can
provide many benefits, both professionally and
personally.
Here are a few reasons why pursuing a
master’s in chemical engineering may be the
right choice for you.
1. A chemical engineering masters can lead
to many different career opportunities. With
a broad knowledge of both chemistry and
engineering, graduates with this degree can
find work in a variety of industries, including
pharmaceuticals, food and beverage
manufacturing, cosmetics, and more.
2. Additionally, a master’s degree can help you
earn a higher salary. According to the Bureau
of Labor Statistics, the median annual salary for
chemical engineers is $98,340. With a master’s
degree, you may be able to earn even more
than that.
3. Finally, pursuing a master’s degree can help
you develop new skills and knowledge that can
benefit you both professionally and personally.
The skills you will learn in a chemical
engineering masters program
There are many skills that you will learn while
in a chemical engineering masters course. You
will learn how to design and operate equipment
used in the chemical industry.
You will also learn how to develop new
processes and products. In addition, you
will gain an understanding of the principles
of thermodynamics, kinetics, and transport
phenomena.
36
37
40
41
42
43
44
45
GREEN OPTIONS
Better People.
Better Service.
Are you having issues with
paraffin buildup, H 2 S or CO 2 ?
CFR Chemicals is your answer.
• Solvents
• H 2 S Scavengers
• Amines
• Glycols
• Cleaners & Degreasers
• Methanol
• Inhibitors
CHEMICALS
LAB SERVICES
TRANS LOADING
1.877.269.3419
www.cfrchemicals.com
Toll Free: 1-888-430-9359
• Pressure Washers
• Fluid Handling Equipment
• Air Compressors
• Chemical Pumps
• Wastewater Treatment
• Commercial Vehicle Wash
Equipment
• Steam Truck Fabrication
• Well Pumps
• Sewage Pumps
• Air Dryers
• Parts Washers
• Parker Hydraulics
PumP & ComPressor Division
www.pumpsandpressure.com
Head Office:
Red Deer
403-347-9770
7018 Johnstone Drive
Red Deer, AB T4P 3Y6
Fax: 403-343-7922
Email: sales@
pumpsandpressure.com
BrancH Offices:
Saskatoon
306-242-6622
610A-51 Street E., Saskatoon, SK S7K 7K3
Fax: 306-934-8204
Edmonton
780-430-9359
6707-75 Street N.W., Edmonton, AB T6B 1T6
Fax: 780-437-0550
Grande Prairie
780-539-9939
11307-98 Avenue, Grande Prairie, AB T8V 5A5
Fax: 780-539-9907
Leduc
780-980-9294
3813-82 Avenue, Leduc, AB T9E 0K2
Fax: 780-990-9204
Calgary
403-263-7207
#50, 5200-64 Avenue S.E., Calgary, AB T2C 4V3
Fax: 403-263-7206
Lethbridge
403-328-0504
2801 - 2nd Avenue N., Lethbridge, AB T1H 6S2
Fax: 403-328-0542
Brandon
204-728-9303
622 Richmond Avenue E., Brandon, MB R7A 7G8
Fax: 204-728-9305
C O V E R
S T O R Y
All of these skills are essential for a career in
chemical engineering.
The career opportunities available to
graduates of a chemical engineering
masters program
A chemical engineering masters program
provides graduates with a wide range of
career opportunities. With a degree in
chemical engineering, graduates can pursue
careers in the traditional chemical industry,
as well as in the environmental and energy
industries.
Graduates of a chemical engineering masters
program can find careers in the traditional
chemical industry working in research and
development, production, quality control, and
management.
In the environmental industry, they may work
in pollution control and waste management.
In the energy sector, they may work in
alternative energy sources such as solar
and wind power. With a master’s degree in
chemical engineering, graduates can pursue
many different types of careers depending on
their interests and goals.
The possibilities are endless for those with a
passion for chemistry and engineering.
What do chemical engineering
masters entail?
Chemical engineering masters is a postgraduate
degree course that entails the study
of how to design and operate chemical plants.
It also involves the study of how to develop
new chemicals and products.
The program typically takes four years to
complete, although some students may
choose to take a longer time to complete their
studies.
The basics: what are the prerequisites
for a chemical engineering masters
degree?
There are many reasons to pursue a chemical
engineering masters degree. Perhaps you
want to gain research experience or move
into management. Maybe you didn’t get the
grades you wanted for your first degree, or
you want to change your career direction.
Whatever your reasons, if you’re considering
a master’s in chemical engineering, it’s
important to know the basics of what the
course entails. A master’s in chemical
engineering is a challenging and demanding
course. It builds on the knowledge and skills
gained in an undergraduate degree, and
takes students to the next level of expertise.
The course is usually two years long, and fulltime
students will take classes and conduct
research for their thesis. To be eligible for
a master’s in chemical engineering, most
universities will require students to have
an undergraduate degree in chemical
engineering or a related field such as
chemistry or physics.
In-depth look: what will you learn
in a chemical engineering masters
program?
A chemical engineering masters program
provides students with advanced knowledge
in the field of chemical engineering. Students
will learn about a variety of topics, including
thermodynamics, fluid mechanics, and
reaction kinetics.
48
In addition, students will also gain practical
experience through laboratory work and
research projects. A chemical engineering
masters program provides students with the
skills and knowledge necessary to pursue a
career in this field.
Pros and cons: is a chemical
engineering masters course worth it?
A chemical engineering masters course is
a postgraduate level course that builds on
the skills and knowledge learned during an
undergraduate degree in chemical engineering.
The aim of the course is to provide students with
advanced theoretical and practical training in
the field of chemical engineering.
There are many benefits to undertaking a
chemical engineering masters course. The most
obvious benefit is that it will enhance your career
prospects and earning potential.
Another benefit of undertaking a chemical
engineering masters course is that it will allow
you to deepen your knowledge of the subject
and gain specialist skills.
During the course, you will have the opportunity
to study advanced topics such as process
design, reactor design, and process control.
You will also gain practical experience through
laboratory work and industrial placements.
The job market: Career prospects with
a chemical engineering masters
A career in chemical engineering is very
rewarding. With a chemical engineering
masters, you can find employment in a variety of
industries, including the pharmaceutical and oil
& gas industries.
49
Pump up your
business profile with
a SIMSA membership.
The Saskatchewan Industrial and Mining Suppliers
Association (SIMSA) helps global resource companies
in the industrial, mining, and energy sectors make
their supply chains better, more responsive,
and smarter.
Could your company benefit from having its profile
listed on our supplier database? Visit www.sksd.ca
and find out how you can join the more than 180
Saskatchewan-based suppliers who already enjoy
the many advantages of a SIMSA membership.
Our Saskatchewan Supplier Database is a tool that
helps link resource companies in need with qualified,
capable Saskatchewan-based suppliers so that they
can connect, innovate and grow together.
www.sksd.ca
Database funding sponsors
Feel the Force of HYDRA!
FANG Shaped Cutter Technology
Optimized Hydraulics
Premium Performance
C O V E R
S T O R Y
The job market for chemical engineers is expected to grow at a rate of 4% from 2016 to 2026,
according to the Bureau of Labor Statistics. This growth rate is about average when compared to
other occupations.
With a master’s degree in chemical engineering, you will be able to apply for
senior positions within the following industries:
• Chemicals industry
• Processing industry
• Oil and gas industry
• Petroleum industry
• Food and beverage industry
• Agriculture industry
• A career in academia or research
Chemical engineering master’s admission requirements: What do you need to
get in?
Most programs require the GRE General Test for admission to a graduate chemical engineering
program.
In addition to the GRE, many programs also require the Chemistry Subject Test. The minimum
GPA for admission to most programs is 3.0 on a 4.0 scale, although some programs may be more
selective.
Programs often require coursework in mathematics (including calculus and differential equations),
physics, and chemistry.
In addition, most programs require courses in thermodynamics, transport phenomena, and reactor
design. Some programs also require courses in environmental engineering or materials science.
Chemical engineering master’s curriculum: What courses will you take?
A typical chemical engineering master’s curriculum will include a mix of advanced engineering
courses and chemistry courses. In the first semester, students will take classes in thermodynamics,
fluid mechanics, and mass transfer.
They will also take a class in organic chemistry. In the second semester, students will take classes
in heat transfer, reactor design, and process control. They will also take an advanced class in
organic chemistry.
During their final semester, students will complete a master’s thesis or research
project.
List of Universities and Colleges in the United States that are offering chemical
engineering master’s degree
There are many schools in the United States that offer a chemical engineering master’s degree. The
most prominent schools that offer this degree are:
University or College Name World Ranking 2022 Estimated Tuition Fee
Massachusetts Institute of #1 63,336
Technology
Stanford University #2 114,442
University of California- Los #16 63,898
Angeles
University of Wisconsin- #21 53,702
Madison
University of Minnesota- Twin #26 52,824
Cities
Cornell University #30 58,808
University of Michigan- Ann #35 65,886
Arbor
University of Pennsylvania #40 56,786
Pennsylvania State University #48 38,466
University of Delaware #48 66,680
Carnegie Mellon University #48 97000
University Of California- San #51-100 22,884
Diego
University of Illinois-Urbana #51-100 54,648
Champaign
Michigan State University #101-150 56,560
University of California- #4 60,218
Berkeley
Northwestern University #28 54,559
Each of these schools has different requirements for its program, so it is important to research each
one thoroughly before applying. A chemical engineering master’s degree can lead to a career in
many different industries. Some of the most common industries that employ chemical engineers
are:
• petroleum industry
• pharmaceutical industry
• food and beverage industry
• environmental engineering
• research and development
C O V E R
S T O R Y
The future of chemical engineering
It is undeniable that chemical engineering has played a significant role in improving our quality
of life. From the production of pharmaceuticals to the development of novel materials, chemical
engineers have contributed immensely to society. However, with the ever-changing landscape of
the 21st century, it is important for chemical engineers to stay ahead of the curve. One way to do
this is by pursuing a chemical engineering master’s degree.
A chemical engineering master’s degree will equip students with the knowledge and skills necessary
to meet the challenges of the future. With an ever-growing global population and dwindling
resources, it is crucial that we find more efficient ways to produce and utilize chemicals.
A master’s degree in chemical engineering will provide students with the tools they need to develop
innovative solutions to these problems.
Conclusion: should you get a chemical engineering master’s?
A chemical engineering master’s course can provide you with the advanced knowledge and skills
necessary to pursue a successful career in chemical engineering. The course can also help you
to develop your research and analytical abilities, as well as your ability to communicate effectively
with other professionals. If you are considering a career in chemical engineering, then a master’s
course may be the right choice for you. The course will provide you with the skills and knowledge
necessary to pursue a successful career in this field.
WORLDWIDE REFRIGERATION
K1R / K2R
Display Chiller / Freezer
Italian four sided
chiller or freezer
display cabinet with
rotating shelves
Rental Enquiries Tel: +44 (0) 28 9260 4619
www.loweref.com
mail@loweref.co.uk
14.5 SEER
Performance has never had this much clas
LX Series
TCJF ModEl AiR CondiTionER
wiTh MiCRoChAnnEl TEChnology
NEWS
Introduction of SIMULSO
SL 7G Hydrotope Surfactant
Gaining Momentum
The global surfactants market value is forecasted to reach US$45.49 billion in 2023, growing at
a CAGR of 5.5%, for the period spanning from 2019 to 2023.
The factors such as increasing the home healthcare industry, escalating urban population,
growing household consumption expenditure, accelerating economic conditions and
improving consumer confidence are expected to drive the market growth. However,
growth of the industry would be challenged by stringent regulations, volatility in the raw
material prices and intense competition. A few notable trends include rising consolidation of
market players, increasing preference for sugar surfactants, growing adoption of surfactants by
pharmaceutical companies, and expanding bio-based surfactants market.
The surfactants industry consists of manufacturers of non-ionic, anionic, cationic and amphoteric
surfactants. Major application fields of surfactants are Household Cleaning, Industrial &
Institutional (I&I) Cleaning and Personal Care Industry. In terms of raw materials, surfactants are
prepared from petrochemicals or bio-products.
60
The fastest growing regional market is Asia-Pacific, improving economic conditions and growing
personal & home care market in emerging countries i.e. China & India. China represents one of
the largest markets for surfactants and is already well-penetrated at developed market levels.
North America and Western Europe are highly established premium markets where growth lies
in Bio-Based surfactants.
Company Profiles
6.1 Kuala Lumpur Kepong Berhad
6.1.1 Business Overview
6.1.2 Financial Overview
6.1.3 Business Strategies
6.2 BASF SE
6.3 Huntsman Corporation
6.4 Stepan Company
6.5 Evonik Industries AG
6.6 Galaxy Surfactants Ltd.
61
Informed Decisions Through
Informed Decisions Through
Integrity and Innovation
Integrity and Innovation
www.digitalsurveying.co.za
www.digitalsurveying.co.za
Delivering Cutting Edge Technology
& Logging Solutions Africa Wide
Acquisition
Acquisition
and interpretation of wireline logging
data to maximise
and interpretation
value of your
of
resource
wireline
assets
logging
data to maximise value of your resource assets
Geophysical, Structural and Geo-technical Logging || Enhance Hydro-geology Models with bMR
Geophysical, Structural and Geo-technical Logging || Enhance Hydro-geology Models with bMR
Directional Surveying with latest AMT Gyro technologies || Data Interpretation and Modeling
Directional Surveying with latest AMT Gyro technologies || Data Interpretation and Modeling
Critical input to your Hydro-geology
model off the back of a truck
Borehole Magnetic Resonance (BMR)
Your
Your
Answer
Answer
Product
Product
for
for
Bankable
Bankable
Cost
Cost
Reductions
Reductions
|| Characterise storage flow capacity of sub-surface formations
|| Characterise storage & flow capacity of sub-surface formations
||
||
Acquire
Acquire
porosity
porosity
measurements
measurements
without
without
radioactive
radioactive
sources
sources
||
||
Replace
Replace
packer
packer
testing
testing
and
and
reduce
reduce
costs
costs
by
by
60-70%
60-70%
||
||
Reduce
Reduce
laboratory
laboratory
analysis
analysis
by
by
60-70%
60-70%
||
||
BMR60
BMR60
now
now
with
with
natural
natural
gamma
gamma
combination
combination
log
log
M: +63 921 7105796
NEWS
Advantages & Drawbacks
of Overhead Gantry Crane
Shipbuilding and manufacturing both employ gantry cranes. Businesses that move heavy loads
frequently can benefit from the efficiency and ease of use of overhead cranes.
If you are considering purchasing a crane-like this for your business, you should be aware
of the advantages and disadvantages of a 5-ton gantry crane. There are several benefits of
these cranes, but they also have some downsides. You will be better able to decide whether
a crane like this works well for your operation when you have all of the facts to hand.
64
Benefits Of Overhead Gantry Cranes.
Cost-effective
Carrying heavy materials is safe and cost-effective with an overhead gantry crane. Designed to
meet your specific needs, they can help you process your materials more effectively and more
efficiently. A variety of locations utilize these devices, including mechanical facilities, power
stations, water treatment centers, and metal
fabrication factories.
Adjustable size
Unlike other cranes, gantry cranes can work
inside or outside, either in steel or aluminum,
and their height, span, and tread sizes can be
adjusted. Loads can pass through doorways
and around obstacles during transport with
ease thanks to adjustable heights, spans, and
treads.
Can be used outdoor
Gantry cranes can be used outdoors, which
is one of their main advantages. They don’t
require any external installation, as they are
freestanding. Unlike bridge cranes, which
are usually attached between two walls of a
building, this type of crane resides outside
the building. These cranes are often found at
outdoor container terminals or shipping yards
due to their design.
Easy to move
Similarly, gantry cranes with rubber tires can
also be used in a wide variety of locations.
Unlike other types of swings, these devices
are not tied to a structure, so as long as they
can stand on flat ground, they can be used
anywhere.
Help in short term work
only going to be present temporarily. Using
a gantry crane instead of a bridge crane can
save you the hassle and expense of altering
the building.
Drawbacks
Gantry cranes have some drawbacks, like
any other type of equipment. They occupy
some floor space since they rest on their legs.
Bridge cranes are entirely overhead, which is
in contrast to this. With a bridge crane, you
could use all the space of your building quite
effectively, while a tripod crane would require
more space.
Rail-mounted gantry cranes and other gantrymounted
equipment can only move along
rail tracks back and forth. The rubber tires of
gantry cranes make them less mobile. This,
however, is not an issue for most applications.
In order to choose the right crane, you must
choose one that is flexible enough, whether
that is a rubber-tired gantry crane or a railmounted
gantry crane.
To wrap
You should now be able to make an informed
decision about whether or not you want to
purchase one of these cranes for your company
after knowing more about the advantages and
disadvantages of 5-ton gantry cranes.
Alternatively, you can use a gantry crane for
short-term work in buildings where you are
65
Power Solutions together with Genesis,
your providers of energy solutions
Power Solutions is an international key-player with many years of experience in the rental
Power power Solutions market. Our is an motivated international team key-player offers you with a professional many years solution of experience for all small in to the multimega
watt market. projects Our motivated in many diverse team offers locations you worldwize a professional utilizing solution the latest for all technologies.
small to multi-
rental
power
mega We are watt 24/7 projects at your disposal in many to diverse help in locations your needs worldwize and questions. utilizing the latest technologies.
We are 24/7 at your disposal to help in your needs and questions.
Genesis, proudly a B-BBEE level one company, is the local operation for Power Solutions in
Genesis, South Africa. proudly They a bring B-BBEE local level knowledge one company, and solutions is the local directly operation where for required. Power Solutions in
South Africa. They bring local knowledge and solutions directly where required.
Power Solutions NV
Power BELGIUM Solutions NV
BELGIUM
Info@powersolutions.eu
Info@powersolutions.eu
www.powersolutions.eu
www.powersolutions.eu
+32 325 88 00
+32 325 88 00
Genesis
SOUTH Genesis AFRICA
SOUTH AFRICA
Info@genesis.com
+27 Info@genesis.com
837 75 62 83
+27 837 75 62 83
Defense and Mobility Systems
Increase tear / puncture resistance
reduce tire life cycle costs
Improve Safety
Fire resistant
Available from 20 in.to 63 in.
in sectors for big sizes
sales@hutchinson.com
2016 - page pub-a4-v2v.indd 1 23/03
efense and Mobility Systems
Defense and Mobility Systems
Defense and Mobility Systems
ales@hutchinson.com
Defense
Defense
and Mobility Systems
Defense and Mobility and Mobility Systems Systems
sales@hutchinson.com
sales@hutchinson.com
Defense and Mobility Systems
sales@hutchinson.com
sales@hutchinson.com
Defense and Mobility Systems
page pub-a4-v2v.indd 1 23/03/2016 16:54
sales@hutchinson.com
➞
2016 - page pub-a4-v2v.indd 1 23/03/2016 16:54
2016 - page pub-a4-v2v.indd 1 23/03/2016 16:54
NEWS
Read this before hiring
a marine service
Your boats will occasionally need repairs and service no matter how well you maintain
them. You should look for a boat repair shop if you don’t have one in mind. When
looking for the right repair service, the first thing you need to think about is the very
first impression of the boat repair shop.
In regards to this point, what you should be aware of is that a neat and orderly business will
reveal a lot about the one you can consider. A repair service that falls under this category will
be a sign that their employees, as well as their management, understand the importance of
having a working environment that is comfortable and safely maintained.
Choosing a marine repair service.
Prior to buying a boat, you should inquire about the service department to make sure you will
get the right professional to service it. To fully understand how to maintain your vessel, ask to
meet with the service manager.
68
This person should show you around the service shop. You should tour an organized and
clean shop. If the service manager has been maintaining the vessels for a long time, then that
is an important question to ask. The more experience they have the better they will be able to
handle your vessel.
Many suppliers require that their professionals go through extensive training. Master technician
certifications are also given to them. If you are selecting a boat technician or a marine
service, you should ask for proof of these credentials. Certified technicians have passed very
challenging tests.
Many shops with master technicians have diplomas on display. Using certified and welltrained
technicians assures you of their ability to handle any yacht or other marine vessel
service issues with ease.
A ship repair service provides immediate or major ship repairs and refurbishing services in or
out of port. Besides tugs and barges, they also repair fishing boats, workboats, and fishing
vessels with a modest budget and repair requirements.
Is a Boat Repair Technician Expensive?
The labor cost for marine technician service will vary by region and season, but generally will
be between $70 and $120 per hour, similar to the labor cost at a car dealership. When the
shop is not very busy in the winter or off-season, rates may be lower.
Standard annual engine maintenance or winterization may be a flat fee at some shops.
Specialized service for marine diesel engines will be more expensive; a technician certified
by the manufacturer may charge more than $175 per hour.
You can also hire a mobile marine technician, who will come to your boat for basic engine repair,
electronics repair, and other tasks that are not easily completed within the shop. Likewise, you
may have to pay a mileage fee to the mobile shop, but you did not have to move your boat.
Applications
Shipping vessels (containers, oil), military vessels, recreational boats, sailboats, and yachts all
use marine repair services.
Marine repair services provide fast turnaround times and quality service for everything from
super tanks to cruise ships. Minor, major, and emergency boat repair services are available
around the clock and worldwide via mobile equipment and dedicated personnel.
69
N E W S
S T O R I E S
The 4 Areas of Your
Engineering Business You
Should Outsource
This decade is set to be one of
the most interesting years yet
for business, technology, and
engineering. As we all know,
running a business is incredibly difficult
but thanks to advancements in tech and
software it is becoming much easier.
One of the most useful advancements for
business has been the improved ability
to outsource many tasks, thanks to better
forms of communication and the ability
to send money around the world quickly
and safely.
This has allowed many businesses to
go online and find the best freelancer
or organization for individual projects
or ongoing tasks that they do not want
to complete in-house. This frees up a
company’s employees and allows them
to work on more important aspects of
their role. It also saves a business a lot of
money in the long run.
Here are the 4 areas of your
Engineering business you
should outsource.
1. Content Marketing
Marketing was one of the first areas of
a business to be outsourced with many
freelance designers or small creative
agencies working solely online. Now, all
72
aspects of marketing can be outsourced
with ease. This can include anything
from design, copywriting, strategy, SEO,
advertising, and content creation.
Marketing is absolutely essential to
any business that wants to succeed in
2020. It is imperative that businesses
develop their brand, build a rapport
with their customers, and market their
latest products/services in the best way
possible. Without a solid marketing plan,
over 35% of businesses fail.
A modern business can not deny the
importance of marketing. However, the
internet is now making it easier than ever
to go online and find the perfect marketing
freelancers and agencies with the click of
a button. If you need a specific project
completing like web design you can find a
professional freelancer with tons of proven
experience on Fiverr at a decent rate.
Those in need of a full marketing solution
can find a digital marketing agency who
can manage everything you need from
brand awareness to email campaigns all
via Skype and email.
This flexibility allows a business to save
serious amounts of money from their
marketing budget without sacrificing any
quality in your marketing performance.
2. IT Services
The days of implementing large and
expensive in-house IT departments are
over. Now, with the help of the improved
connectivity of people via the internet, all
your IT support needs can be handled by
an external IT solutions company.
This has a many benefits for a business.
First, it saves the business a small fortune
that would usually be spent on paying
a large number of IT staff in-house.
Second, your IT team can now spend
their precious time on helping to build
your business through innovative new
hardware and software solutions. Finally,
your business saves tons of time which
would otherwise be spent dealing with
IT issues in-house freeing up everyone
to concentrate on their own work and
avoiding any implications between inhouse
staff.
Now, full IT support can be had at the
click of a button or a simple phone call.
IT support companies usually offer 24/7
support for your staff using the best
trained IT personnel available who all
boast the latest in IT certifications and
training. No more hefty expenses or time
lost when you need to re-train your inhouse
IT support.
73
CABLE MANAGEMENT SOLUTIONS
STRUTFAST supplies cable ladder and other mechanical support solutions across Africa for the extreme mining
market. All of our products are designed, manufactured and tested for the most arduous applications and incountry
conditions. Our products are compliant with all relevant local and International standards including
NEMA 20B & 20C. STRUTFAST - leading the African continent in cable management solutions
www.strutfast.co.za
A PROUD SOUTH AFRICAN COMPANY
sales@strutfast.co.za
Tel: (+27) 11 473 1212
N E W S
S T O R I E S
3. Accounts
Not all business need a full accounting department, especially small businesses. Outsourcing
your accounting needs has a myriad of benefits for business owners and their team. Let’s
face it, most of us don’t enjoy the task of accounting as it takes up so much of our times and
induces so much stress among team members.
So, why not outsource your accounting needs to a freelancer or accounting firm? Let them
handle all the stress and pain in balancing the books or tracking expenses so that you and
your team can focus on your own roles. Outsourcing your accounts saves you money also
eliminating the need to hire full-time accountants that are not needed on a 9-5 basis. You can
use your outsourced accounts team only as and when you need them and only pay them for
that time.
You can also help to reduce fraud by hiring a CFO who is trained to investigate any unusual
activity. As a small business, you usually wouldn’t be able to hire a full-time CFO, but when
you outsource you can hire a CFO part-time to watch out for unusual activity.
Finally, when you hire a specialised accounting firm you are hiring a team of experts in their
field. You aren’t required to train them or pay for the latest certifications. This is all handled by
the third-party accounting firm This saves you money, time, and ensure you are always getting
the best accounting service possible.
4. Virtual Assistant
A virtual assistant is relatively new concept that has been taking off around the world. Rather
than hiring a full-time in-house assistant, you can now hire an expert virtual assistant who
works remotely and only works the hours required to complete your tasks. Almost like a payas-you-go
assistant. This saves money, time and ensures you are getting a great assistant.
With modern technology, it’s simple for a virtual assistant to stay on top of your every need.
They can communicate through messenger services, emails, Skype, Slack, Teamwork or
whatever system you prefer. Scheduling, bookings, meetings, data input and more can all be
completed from a remote desk by your virtual assistant.
Having a virtual assistant or more in different time zones can also help you to offer your clients
a 24/7 service making your business always open and ready to take new orders, information,
meetings, and invitations. You can also scale your assistant needs up and down as necessary
with no contracts or commitments in place.
The biggest benefit to having virtual assistants is to allow you to create a better work-life
balance for yourself. You no longer need to always be available when your armed with a
number of competent virtual assistants that can handle everything for you while you spend
time with your family or enjoy a round of golf.
N E W S
S T O R I E S
Four Common Payroll
Pitfalls in Engineering
Business
Payroll management in the engineering
business world sounds simple in
theory. However, it’s surprisingly
easy for a growing engineering
business to make payroll-related mistakes,
especially if it doesn’t have robust processes
and systems in place. In some cases, an
error can have serious consequences for a
business, ranging from damaging employee
morale to losses from fraud.
Here are a few of the most common errors
industrial, tech, construction, energy, and
engineering businesses make in managing
their payrolls:
1. Failing to automate your
engineering business
Putting this one right on top of the list makes
sense because poor systems and controls
are the root cause of most of the other payroll
mistakes listed below. If you don’t have an
automated system in place, you can easily
make errors in calculating employee salaries
and deductions, and in recording employee
information and transactional data.
Failing to automate also means the payroll
team spends most of its time on compliance
80
and admin issues, when it should ideally
be focusing on helping the engineering
business understand payroll costs, identify
trends, enable better employee experiences,
and provide strategic advice to finance and
management teams.
2. Not putting checks and
balances in place to your
engineering business
Payroll fraud is a major risk for engineering
businesses today and is often discovered
by accident, only after the company has lost
a vast amount of money. Many small and
medium-sized businesses are vulnerable
to payroll fraud because they don’t put
appropriate checks in place. For example,
they often give one accountant or payroll
manager complete access to the payroll
system and company bank account. The
simplest way to prevent most incidents of
payroll fraud is to enforce segregation of
duties in the payroll department. Employees
calculating pay rates and accumulated
hours for payroll should ideally not be the
same people who process the payments.
Different people should have responsibility
for capturing payroll data and for managing
access to the system as well as adding
and removing employees from the payroll.
Yet another person could be tasked with
checking whether the numbers add up.
3. Poor control over leave days
It can be all too easy to lose track of leave
days if an employee takes leave without
proper authorisation. The likely outcomes of
such irregularities can be that an employee
benefits from extra paid leave or loses
leave days due to errors in data capture,
or that their available leave payment may
be inaccurately calculated when they
resign from the company. Other issues may
include two critical team members applying
for and having their leave approved at the
same time, when at least one should be in
the office.
An automated payroll system allows you to
easily process leave applications. It enables
you to manage leave administration,
enforce company-specific leave policies
and ensure the records are accurate. You
can also introduce the employee selfservice
mechanism to streamline leave
applications and approvals for employees
and managers.
4. Travel allowance pitfalls
Reimbursements and allowances for
employee business travel are a minefield
if you are not prepared. A travel allowance
is a regular monthly amount the employer
pays an employee to compensate them for
travel in either a privately-owned vehicle or
for industrial, construction, technology and
energy engineering business related air
travel.
It is better to persuade team members to
opt for reimbursements rather than travel
allowances simply because they are easier
to understand. Once again, an automated
payroll solution will do the calculations for
you and help capture the right data using
the correct categorisation.
Final Words from an Engineer
There is no reason today for payroll to be
a headache or a distraction. Suitable tools
can help you take care of most of the red
tape so you can focus on vital areas of the
engineering business, such as growth,
strategy and talent development.
81
THE LEADING PROVIDERS OF
INTEGRATED UNDERGROUND SAFETY SOLUTIONS
• PERMANENT REFUGE BAYS + PORTABLE REFUGE CHAMBERS
• REFUGE-TO-SURFACE REAL-TIME DIAGNOSTICS & COMMUNICATIONS
www.minearc.com
• UNDERGROUND TOILET SYSTEMS
• UNDERGROUND MINE STENCH GAS WARNING SYSTEMS
Contact our South African office: +27 (0) 11 796-5162 www.minearc.com
High Quality
FABRIC STRUCTURES
Delivered Fast, Built to Last
African Mining Services
Mali
Citic Pacific
Karratha
Orphir Energy
Tanzania
N E W S
S T O R I E S
What to Expect from an
Engineering Consulting
Firm
There almost always comes a time
when utilizing a consulting firm will be
a necessity for a business, whether
it’s for marketing information, strategy
advice, or certain skills that don’t exist in the
organization. Consultants can provide solutions
for a wide range of issues businesses face,
which is why the U.S. consulting market has
continued to grow - in 2018 it was estimated to
be a $68.5 billion industry.
There are different types of consulting firms,
such as an economic consulting firm, a
general business consulting firm, a technical
engineering consulting firm, and a legal
consulting firm, with expert consultants
bringing different ideas to the table. They
often work with clients on planning, strategy,
and problem solving, perhaps helping a
business owner develop a particular skill and
knowledge. They may assist in the creation of
marketing plans, determine which marketing
techniques will work best and how to use them,
or help to design a business model.
What can you expect when you
hire an engineering consulting
firm?
An Outsider’s Perspective
Getting a different perspective from an
outside eye can make the difference in solving
problems, the same way it can when dealing
with life situations such as whether or not to take
a new job. Oftentimes, a business owner has
84
an idea on how to solve a problem, but wants
to make sure that their thinking is correct. Or
they may be too close to the challenge that
they miss the obvious answer. Getting the
opinion from a consultant who has worked with
many different businesses, possibly having
worked through the same or a similar problem
before, can provide a new perspective based
on that previous experience, bringing new
and innovative ideas to the table.
Industry Experience and
Knowledge
When choosing an engineering consulting
firm, it’s important to choose one with a
consultant that has experience in your
industry, with in-depth knowledge of what
you do and specific challenges you might be
facing. Beyond knowledge of your industry,
the best consultants should take time to know
your business inside and out, often by making
various assessments and through informal
discussions. They’ll also analyze the results of
any assessment in order to provide you with
a list of any areas of weakness to target for
growth, along with strengths.
Bring Out Your Best Leadership
Skills
The engineering consultant you work with
should help you improve your leadership
skills, not by telling you what to do, but by
guiding you to make better decisions by using
their expertise combined with your personal
strengths. A truly good consultant will be able
to sense when it’s the right time to provide
encouragement or help you obtain a better
by asking various questions.
A Strategy
Expect your engineering consulting firm to
provide you with the best possible strategy
to improve your business based on their
observations, assessment, and your input.
That should include measurable goals that
can help monitor improvements.
Achieving Measurable Results
Expect to achieve measurable, positive
results based on your business goals by
hiring a good consulting firm. While success is
highly unlikely to happen overnight, it should
be clear to you that you’re going in the right
direction. If not, you may need to cut ties and
find an engineering firm and consulting more
suited to your needs.
85
ON THE BAKKEN’S DOORSTEP
Daily direct WestJet flights to and from Calgary
Highly diversified industrial and commercial
business sectors
A large, dedicated, and skilled labour force
Full urban amenities and services
High-end oilfield safety certification
via Assiniboine Community College
Thousands of acres of industrial land
Overall business cost competitiveness
consistently ranked in Top 10
Birdtail
(135)
Manson
(125)
Kirkella
(120)
Distances from Brandon, MB
Oilfield Location
(km)
Daly
Sinclair
(125)
Tilston
(145)
Virden
(80)
Pierson
(160) Waskada
(140)
Souris
Hartney
(70)
Regent
(80)
Whitewater
(95)
Mountainside
(100)
Lulu Lake
(105)
Dallas Transport Ltd
Flatdeck | Stepdeck | Lowbed Trucking
We offer Coast-to-Coast Service between
Canada and the USA
Dallas Yacucha
Phone: 1-204-239-5979
Fax: 1-204-239-0150
Toll Free: 1-800-665-0473
www.dallastransport.com
N E W S
S T O R I E S
The Most Important
Features Your
Engineering Website
Needs
Whether you’re launching an engineering business or have decided to go freelance,
you need a website that gives clients a place to learn more about who you are
and what you do. Because engineering covers such a broad spectrum, from
software to mechanics and far beyond, it’s vital to establish what type of engineer
you are as quickly as possible. With a website, you can make this possible, but what else
should you include?
Fast Load Times
No one wants to sit around and wait for a website to load. Studies have shown that the
average person will wait just three seconds before clicking away. Therefore, you must ensure
your website is as quick to load as possible, keeping visitor’s attention.
However, website speeds can be tricky. The more images and information, the slower the
site will be overall. To combat this, you’ll need to look into the best software advancements
that will maintain your website speeds and maintain interest.
A Piece Of Your Mind
It’s not enough to simply list your services and hope that people will get in touch. You need to
show visitors that you know what you’re talking about. As engineering is more of a specialist
88
subject compared to other businesses and
industries, proving your authority is a must.
Blog posts and content, such as videos or
infographics, are a superb way to engage
visitors and show them you know what you
are talking about. Besides this, it’s also the
best way to drive traffic and attract new clients
without spending a fortune on marketing.
Because you have all of this knowledge and
insights already, you’re essentially marketing
our business for free.
A Strong Portfolio
You also cannot rely on a shiny, attractive
website to convince visitors to seek your
business. With engineering being such a
competitive industry, you must show evidence
that you have enough experience to be trusted
with potential projects.
This is why a portfolio of your past projects
is so important. A portfolio can act as a
visual resume, backing up any claims you
make about success with previous clients
and giving potential clients an idea of what
to expect from you. You can put as many or
as few examples as you like, but it’s always
advised to select the projects you are most
proud of alongside those that are the most
successful.
Automatically Updated
Information
Creating a website that also acts as a hub for
engineering information could also benefit
you, especially when you’re trying to stand out
from the crowd. There are plenty of options
to consider, but it’s important to choose the
information that visitors would be interested
in.
Depending on the type of engineering you
specialize in, using aggregators to highlight
the latest developments or keeping up to date
with the stock marketing using alternatives to
Yahoo Finance API can add essential value
to your site, giving you the edge that others
neglect.
Engineering the Best Website
A good website is not built overnight. However,
if you have experience in software engineering,
you can design and maintain a dependable
and attractive website all by yourself. If your
engineering tablets lie elsewhere, get in touch
with a professional web developer to ensure
your site stands out.
89
N E W S
S T O R I E S
4 Grant Management Benefits
for Engineering & Industrial
Companies
For many non-profits and research organizations, grants are the only way to secure
funding for construction and engineering projects and growth. As a result, securing
these grants becomes extremely important, essentially a required step for the industrial
and technology driven organization to survive and grow. Since grant management is so
important to these organizations, any tools that can aid in the process are extremely valuable.
So what are the best tools to help you with securing and managing your grants? Here are four
beneficial tools to use in your grant management efforts.
Editing Software
An extremely beneficial tool that you can use in your grant management efforts is editing
software. Writing and creating grant proposals and acceptances are absolutely vital in the
grant management process. You need to be able to illustrate why you need the funding from
the grant and persuade others to actually provide you with the grant. In addition, you need
to be able to write compelling acceptance letters that accurately portray your gratitude and
establish relationships that your organization will rely on in the future. In order to do this well,
you need to ensure that your writing is free of spelling and grammar mistakes. While editing
these projects yourself can work, there’s always a chance that something slips through the
cracks, and that’s where editing software can come in. Editing software can ensure that your
proposals are perfect, fixing the mistakes that were made from human error.
92
Budgeting Software
Budgeting is an extremely important part of grant management. If you’re going to secure a
grant, then you’ll need to illustrate exactly how you’ll use the finances provided from the grant to
better your organization. In order to do this properly, you’ll have to create a budget that uses all
of the funds allocated from the grant effectively and efficiently. During this process, budgeting
software can be a huge help. Rather than computing the budget by hand, budgeting software
can be a huge help in allocating funds efficiently. As a result, budgeting software can be a
huge help in the grant management process.
Management Software
When undergoing grant management, you’re going to need to keep track of a lot of data.
You need to track exactly how much you’re spending and what you’re spending it on. In
addition, you need to ensure that you’re tracking various metrics on how your organization’s
performance is improved or affected by the implementation of the grant’s funds. Tracking so
much data can be tedious, which is where data management software like Microsoft Excel can
come in. Here you can neatly organize all of the data and metrics that you measure, and can
later easily implement them into the reports that you need.
Reporting Software
Whether you’re focusing on federal grant management or private grant management, you’re
going to have to create lots of reports on your organization’s progress. Many grants require
monthly reports to be due on set dates, as they want to ensure that you’re adequately using
the funds provided. These reports will take the metrics that you previously have installed and
present them in a neat and easy-to-follow manner. Reports are critical to your organization’s
success, and as such any help that you can get in creating them is welcome. There is lots of
software out there that can help with the writing and creation of reports, helping you stay on
track with the grant management process. If you want to stay on top of the grant management
process, then effectively using reporting software is a key tool that you need to master.
93
N E W S
S T O R I E S
Do You Have What It
Takes To Be A Chemical
Engineer?
This is your quick guide on what it takes to be part of this very competitive field.
Not everyone can become a chemical engineer. Considered as one of the hardest
engineering courses, it’s no surprise that they receive one of the highest annual wages
around the world. Not only do they apply chemistry and engineering concepts in their
profession, they also have to deal with biology, physics, economics and mathematics
to mass produce different products we use everyday.
Chemical engineers are crucial in a lot of manufacturing industries. They are the ones incharge
in designing processes and identifying which equipment and devices should be
used for large-scale manufacturing of products. Some of them are involved in research and
development of products that can be used for more efficient and effective manufacturing.
Aside from tasks dealing with manufacturing processes, they’re also in-charge in making sure
safety and environmental regulations are met and production costs are handled well. That’s a
lot of jobs very crucial to companies.
96
But what does it take to be a chemical engineer?
One must obtain a bachelor’s degree in chemical engineering – that’s 4 or 5 years of intense
studies of chemistry, physics, mathematics and engineering courses. Internships are usually
required from students to finish the program. This will help them get an idea what kind of job
they’ll be experiencing as soon as they enter the industry. Getting a professional license is
necessary for those interested to advance their careers in the field.
Since chemical engineers work with other engineers and production workers, they must
develop their interpersonal and organizational skills. They also need analytical and problemsolving
skills. Creativity is also required from chemical engineers since they have to find
innovative ways to produce goods in the most efficient ways there are. Later on in their
careers, chemical engineers are in-charge in supervising their teams of engineers and
technicians in different companies. These companies come form different industries such
as energy, food and beverage, electronics, clothing, technology and nanomaterials.
Chemical engineers don’t only work in offices and laboratories. They get to travel a lot.
Depending on the company they work with, they spend a lot of time inside industrial plants
or refineries to help oversee production. These plants can be based locally or outside the
country.
There are health risks in the job, though.
Since chemical engineers are exposed to different chemicals and huge machines and
devices, they are exposed to health and safety hazards. So, be careful!
With great responsibility, does it mean they earn more than other
engineers?
That depends on the company a chemical engineer is employed at. According to the US
Department of Labor, the median annual wage of chemical engineers is over $96,000. The
minimum annual wage a chemical engineer gets is reported to be around $60,000. The
highest annual wage reached around $156,000. Not bad at all.
97
Virden
Meter
Since 1967
Sales & Services for:
PUMPS / METERS / VALVES / CONTROLS / SWITCHES
Instrumentation service
PLC/RTU Programming
Treater Parts
Shop & Field Calibrations
Combustion Services
SCADA Services
PSV Service
Shop & Field Repairs
Virden, Manitoba
Tel: 204-748-3704
Estevan, Saskatchewan
Tel: 306-634-5504
www.virdenmeter.com