TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
GPS Mode Comment<br />
� � � Acquisition The GPS module is trying to acquire<br />
83<br />
the correct position. To e<strong>as</strong>e the<br />
acquisition, the approximate<br />
position and time could be entered.<br />
Upon power-up the GPS module will<br />
always enter this mode. If the<br />
transceiver h<strong>as</strong> a valid position<br />
stored in non-volatile memory, this<br />
will be fed to the GPS.<br />
� � � 2-D The time, latitude and longitude are<br />
known. The number of small boxes<br />
indicates the quality of the GPS<br />
signal.<br />
� � � 3-D The time, latitude and longitude are<br />
known.<br />
Table 7 GPS Status<br />
The time supplied by the GPS will be used <strong>as</strong> the system<br />
time. This also includes the PC or Message Terminal. When<br />
the GPS is in 2-D or 3-D mode, you are not able to change<br />
the time or the position. If you do not have the correct local<br />
time, ple<strong>as</strong>e check your time-zone. (Press F10, Select<br />
Options and Clock).<br />
Maritime Units Only. If the position h<strong>as</strong>n't been updated in 4<br />
hours an ‘Update Position’ warning is shown. This warning is<br />
acknowledged using the Esc key. In addition the Status<br />
Field of the main Capsat window will show 'Position' next to<br />
the Ocean Region. This indication is removed when the<br />
position h<strong>as</strong> been updated. If it isn't updated within 12<br />
hours, the position will become invalid.