TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
10. Press Enter once on '< SEND >' to transmit the<br />
message. The Transmit window is now<br />
removed and you are back in the Text Field.<br />
The message is saved in the message log on<br />
the disk along with addressing information<br />
allowing you to send the message again if<br />
necessary.<br />
5.5.7 SELECTING A FILE FOR TRANSMISSION<br />
1. Move the highlight in the Transmit window to '<br />
[X] Text in editor' and press Spacebar to<br />
remove the 'X'. This reveals the field 'File'<br />
immediately below.<br />
2. Press Arrow Down to move highlight to the<br />
File field and press Spacebar to have the Select<br />
File window presented.<br />
3. Select the desired file by choosing Select.<br />
Note. The size of the file must not exceed 10 Kb, which is<br />
the absolute maximum message length.<br />
5.5.8 SCHEDULING A FILE FOR LATER TRANSMISSION<br />
1. Move the highlight in the Transmit window to '<br />
[X] Immediate transmission' and press<br />
Spacebar to remove the 'X'. This reveals the<br />
field 'Time' immediately below.<br />
2. Press Arrow Down to move highlight to the<br />
Time field and enter the time of the<br />
transmission.<br />
64