TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
Input Mode Shows which input mode you currently are<br />
using. The field will either be Telex or ASCII. In Telex the<br />
editor will only allow you to insert characters that are<br />
represented in the Baudot alphabet.<br />
Filename Shows the name of the file on disk holding the<br />
present text. When starting out on a new message this field<br />
will be empty until you have saved your message for the<br />
first time.<br />
Character count Indicates the number of characters in your<br />
message at any time. Ple<strong>as</strong>e note that a new line is only<br />
counted <strong>as</strong> one character. When saving the message, a new<br />
line will be saved <strong>as</strong> two characters, CR LF (Carriage Return<br />
Line Feed).<br />
Insert mode Shows whether you will be inserting or<br />
overwriting characters when you type. The mode is toggled<br />
by pressing Ins on the numeric keypad. Make sure that Num<br />
Lock is off.<br />
Margin Shows the position of the right margin of your<br />
message. The default setting is at 69, which is the<br />
maximum line length that can be transmitted through the<br />
Telex Network.<br />
5.3.2 CREATING A MESSAGE<br />
1. Choose File (Alt, F) and New Telex or New<br />
ASCII.<br />
If you are going to send the message to a telex<br />
destination, you should select New Telex to prevent<br />
you from using characters that cannot be transmitted<br />
through the Telex network. In all other c<strong>as</strong>es it will be<br />
most convenient to use the ASCII mode.<br />
43
Change language