TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
5.2.2 COMMISSIONING<br />
When your system is going to be used for the first time, the<br />
following steps must be done.<br />
Login Make a login by choosing Options, Login (Alt, O, L)<br />
and select the desired Ocean Region.<br />
West Atlantic E<strong>as</strong>t Atlantic Pacific Indian<br />
The Status Field will now indicate ''. Wait<br />
until the Status Field shows the desired Ocean Region.<br />
Link Test The first time a transceiver performs a login to the<br />
Inmarsat-C Network, the transceiver is commanded to carry<br />
out a Link Test, also known <strong>as</strong> Automatic Commissioning.<br />
This may take up to 15 minutes and is indicated by '' in the Status Field.<br />
During the Link Test the message:<br />
will be displayed.<br />
Automatic test mode: Normal communication disabled. Do not<br />
press any distress buttons unless you are in distress<br />
When the link test is completed, the 'Link Test Finished'<br />
message is displayed/printed along with the results of the<br />
test. Your system is now ready to use.<br />
5.2.3 SENDING A TEST MESSAGE<br />
A quick guide of how to send a message through the<br />
Inmarsat-C Network and back to yourself is presented in<br />
the following. This is known <strong>as</strong> a loop back test.<br />
1. Type in a short message in the Text Field.<br />
39